3270160

https://www.phoenixcontact.com/us/products/3270160 Potential distributors - PTRVB 8-FI - 3270160 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Potential distributors, Nom. voltage: 250 V, Nominal current: 17.5 A, Cross section:  0.14 mm² - 2.5 mm², AWG: 14 - 26, Connection type: Push-in connection, Width: 8.3 mm, Length: 100 mm, Color: gray, Assembly: NS 35/7,5, NS 35/15 Product Features ■ ■ ■ Bridgeable potential distributor with option to supply up to 6 mm² High contact quality thanks to push-in technology as a replacement for Wire-Wrap®, TERMI-POINT®, etc. Tool-free wiring in a confined space thanks to compact size Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 8 Number of connections 29 Nominal cross section 1.5 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 4 kV Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Maximum load current 32 A (The total current of the terminal block must not exceed 32 A) 03/11/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/3270160 Potential distributors - PTRVB 8-FI - 3270160 Technical data General Nominal current IN 17.5 A (with 1.5 mm² conductor cross section) Nominal voltage UN 250 V Connection in acc. with standard IEC 60947-7-1 Maximum load current 37 A (In the case of a 6 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors) Nominal current IN 32 A (with 4 mm² conductor cross section) Nominal voltage UN 250 V Open side panel Yes Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 4.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.5 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 1.5 mm² / 0.4 kg 2.5 mm² / 0.7 kg 0.2 mm² / 0.2 kg 4 mm² / 0.9 kg 2 6 mm / 1.4 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 1.5 mm² Tractive force setpoint 40 N Conductor cross section tensile test 2.5 mm² Tractive force setpoint 50 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed 03/11/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/3270160 Potential distributors - PTRVB 8-FI - 3270160 Technical data General Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Dimensions Width 8.3 mm Length 100 mm Height NS 35/7,5 87.5 mm Height NS 35/15 95 mm Connection data Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² 03/11/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/3270160 Potential distributors - PTRVB 8-FI - 3270160 Technical data Connection data Stripping length 8 mm ... 10 mm Note Only the “CRIMPFOX 6” crimping pliers may be used for crimping with 6 mm² stranded and ferrule. Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 2.5 mm² Conductor cross section solid max. 6 mm² Conductor cross section AWG min. 14 Conductor cross section AWG max. 8 Conductor cross section flexible min. 2.5 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 14 Max. AWG conductor cross section, flexible 8 Conductor cross section flexible, with ferrule without plastic sleeve min. 2.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² Stripping length 12 mm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141118 eCl@ss 4.1 27141118 eCl@ss 5.0 27141118 eCl@ss 5.1 27141120 eCl@ss 6.0 27141141 eCl@ss 7.0 27141141 eCl@ss 8.0 27141141 eCl@ss 9.0 27141141 ETIM ETIM 3.0 EC000901 ETIM 4.0 EC000901 03/11/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/3270160 Potential distributors - PTRVB 8-FI - 3270160 Classifications ETIM ETIM 5.0 EC000901 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Drawings Circuit diagram Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 03/11/2016   Page 5 / 5