3270301

https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Marshalling patchboard, Nom. voltage: 500 V, Nominal current: 17.5 A, Cross section:  0.14 mm² - 2.5 mm², AWG: 12 - 26, Connection type: Push-in connection, Number of positions: 1, Number of connections: 6, Width: 11 mm, Length: 12.2 mm, Color: gray, Color of connection elements: white, Assembly: for snapping onto a DIN rail adapter, for snapping onto a cover flange Why buy this product  High contact quality thanks to push-in technology as a replacement for Wire-Wrap®, TERMI-POINT®, etc.  Individual color assignment of cable and terminal point to ensure error-free, safe operation  Color configuration possible according to VDE 0812, VDE 0815, DIN 47100 or unlimited.  Tool-free wiring in a confined space thanks to compact size  Individual setup thanks to modular principle  Suitable for DIN rail mounting and panel cutouts with corresponding accessories Key Commercial Data Packing unit 1 STK Minimum order quantity 10 STK Weight per Piece (excluding packing) 4.000 g Custom tariff number 85366990 Country of origin Poland Technical data Environmental Product Compliance China RoHS No hazardous substances above threshold values General Number of positions 1 Number of levels 1 Number of connections 6 Nominal cross section 1.5 mm² 09/08/2016   Page 1 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Technical data General Color gray Color of connection elements white Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 4 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum load current 22 A (with a 2.5 mm² conductor cross section) Nominal current IN 17.5 A Nominal voltage UN 500 V Open side panel No Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 11 mm Length 12.2 mm Height 30 mm Connection data Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² 09/08/2016   Page 2 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Technical data Connection data Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A1 Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Drawings Circuit diagram Classifications eCl@ss eCl@ss 5.1 27141124 eCl@ss 6.0 27141124 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 5.0 EC000897 Accessories Accessories Labeled terminal marker 09/08/2016   Page 3 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Accessories Zack marker strip - ZB 10 CUS - 0824941 Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Zack marker strip - ZB10,LGS:FORTL.ZAHLEN - 1053014 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Zack marker strip - ZB10,QR:FORTL.ZAHLEN - 1053027 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Zack marker strip - ZB10,LGS:GLEICHE ZAHLEN - 1053030 Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Identical numbers 1 or 2, etc. up to 100, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Marker for terminal blocks - ZB10,LGS:L1-N,PE - 1053412 Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N, PE, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     09/08/2016   Page 4 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Accessories Marker for terminal blocks - ZB10,LGS:U-N - 1053438 Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: U, V, W, N, GND, U, V, W, N, GND, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.15 x 10.5 mm     Marker for terminal blocks - UC-TM 10 CUS - 0824605 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 CUS - 0829623 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm     Zack Marker strip, flat - ZBF10 CUS - 0825031 Zack Marker strip, flat, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 5.15 x 10 mm     Zack Marker strip, flat - ZBF10,LGS:FORTL.ZAHLEN - 0810009 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 991 1000, Mounting type: Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 5.15 x 10 mm     09/08/2016   Page 5 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Accessories Zack Marker strip, flat - ZBF10,QR:FORTL.ZAHLEN - 0810025 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 5.15 x 10 mm     Marker for terminal blocks - UC-TMF 10 CUS - 0824662 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 5.1 mm     Marker for terminal blocks - UCT-TMF 10 CUS - 0829679 Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type: Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 9.4 x 4.7 mm     Marker for terminal blocks - TMT 10 R CUS - 0824500 Marker for terminal blocks, can be ordered: By line, white, labeled according to customer specifications, Mounting type: Snap into universal marker groove, Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 6.35 x 10.15 mm     Mounting material Flange cover - DF-PTMC-O - 3270400 Flange cover, for direct mounting above, Length: 30 mm, Width: 22 mm, Height: 13 mm, Color: gray     09/08/2016   Page 6 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Accessories Flange cover - DF-PTMC-U - 3270401 Flange cover, for direct mounting below, Length: 29.1 mm, Width: 22 mm, Height: 12.8 mm, Color: gray     Adapter - DF-PTMC-NS - 3270403 Adapter, for mounting on a DIN rail, Length: 64 mm, Width: 22 mm, Color: gray     Marker adapter - DF-PTMC-ZB - 3270410 Marker adapter, for accommodating the marking, Length: 30 mm, Width: 11 mm, Height: 13 mm, Color: gray     Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip     Screwdriver - ST-BW 0 - 1200135 Actuation tool, for all 1.5 mm² spring cages from PT 1,5/S and FT 1,5/S     09/08/2016   Page 7 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Accessories Terminal marking Zack marker strip - ZB 10:UNBEDRUCKT - 1053001 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm     Marker for terminal blocks - UC-TM 10 - 0818069 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 10.5 mm     Marker for terminal blocks - UCT-TM 10 - 0829142 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal block width: 10.2 mm, Lettering field: 8.9 x 9.6 mm     Zack Marker strip, flat - ZBF10:UNBEDRUCKT - 0809997 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 10 mm, Lettering field: 5.15 x 10 mm     Marker for terminal blocks - UC-TMF 10 - 0818124 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 9.6 x 5.1 mm     09/08/2016   Page 8 / 9 https://www.phoenixcontact.com/us/products/3270301 Marshalling patchboard - PTMC 1,5-3 /WH - 3270301 Accessories Marker for terminal blocks - UCT-TMF 10 - 0829204 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 9.4 x 4.7 mm     Marker for terminal blocks - TMT 10 R - 0816210 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK X, THERMOMARK S1.1, Perforated, Mounting type: Snap into universal marker groove, Snap into flat marker groove, for terminal block width: 10.2 mm, Lettering field: 6.35 x 10.15 mm     Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 09/08/2016   Page 9 / 9