3270330

https://www.phoenixcontact.com/us/products/3270330 Marshalling patchboard - PTMC 1,5/80-2 /BU - 3270330 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Marshalling patchboard, Nom. voltage: 500 V, Nominal current: 17.5 A, Cross section:  0.14 mm² - 2.5 mm², AWG: 14 - 26, Connection method: Push-in connection, Number of positions: 80, Number of connections: 320, Width: 110 mm, Length: 73.2 mm, Color: gray, Color of connection elements: blue, Assembly: Wall mounting Why buy this product  Blue design for use in EXi areas  For mounting in a panel cutout  High contact quality thanks to push-in technology as a replacement for Wire-Wrap®, TERMI-POINT®, etc.  Tool-free wiring in a confined space thanks to compact size  Clear representation of actuation and terminal points through vertical conductor routing Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626058467 Custom tariff number 85369010 Country of origin Poland Technical data General Note Labeled from 1 - 80 Number of positions 80 Number of levels 1 Number of connections 320 Nominal cross section 1.5 mm² Color gray 04/11/2017   Page 1 / 6 https://www.phoenixcontact.com/us/products/3270330 Marshalling patchboard - PTMC 1,5/80-2 /BU - 3270330 Technical data General Color of connection elements blue Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.56 W (the value is based on one connection block and is multiplied according to the pin assignment) Maximum load current 24 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) 12 A (in case of a 2.5 mm² conductor cross section, the maximum load current must not be exceeded by the total current of all connected conductors.) Nominal current IN 17.5 A Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 7.3 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 1.5 mm² / 0.4 kg 2.5 mm² / 0.7 kg Tensile test result Test passed Conductor cross section tensile test 0.14 mm² Tractive force setpoint 10 N Conductor cross section tensile test 1.5 mm² Tractive force setpoint 40 N Conductor cross section tensile test 2.5 mm² 04/11/2017   Page 2 / 6 https://www.phoenixcontact.com/us/products/3270330 Marshalling patchboard - PTMC 1,5/80-2 /BU - 3270330 Technical data General Tractive force setpoint 50 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 3.2 mV Result of temperature-rise test Test passed Short circuit stability result Test passed Conductor cross section short circuit testing 1.5 mm² Short-time current 0.18 kA Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 1, class B, body mounted Test frequency f1 = 5 Hz to f2 = 150 Hz ASD level 0.964 (m/s ) /Hz Acceleration 0.58 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 5g Shock duration 30 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % 04/11/2017   Page 3 / 6 https://www.phoenixcontact.com/us/products/3270330 Marshalling patchboard - PTMC 1,5/80-2 /BU - 3270330 Technical data General NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 27,5 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 110 mm Length 73.2 mm Height 30 mm Connection data Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 14 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 1.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 1.5 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A1 Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Environmental Product Compliance 04/11/2017   Page 4 / 6 https://www.phoenixcontact.com/us/products/3270330 Marshalling patchboard - PTMC 1,5/80-2 /BU - 3270330 Technical data Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Dimensional drawing +1 74,2 +1 112,6 Panel cutout Dimensional drawing Approvals Approvals Approvals UL Recognized / cUL Recognized / cULus Recognized 04/11/2017   Page 5 / 6 https://www.phoenixcontact.com/us/products/3270330 Marshalling patchboard - PTMC 1,5/80-2 /BU - 3270330 Approvals Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 24-16 24-16 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C mm²/AWG/kcmil 24-16 24-16 Nominal current IN 10 A 10 A Nominal voltage UN 300 V 300 V cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 60425  FILE E 60425   Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 04/11/2017   Page 6 / 6