3273120

https://www.phoenixcontact.com/pi/products/3273120 Distribution block - PTFIX 6/18X2,5-NS35 BN - 3273120 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Distribution block, Block with vertical alignment and integrated supply, nom. voltage: 500 V, nominal current: 24 A, connection method: Push-in connection, Push-in connection, number of connections: 19, cross section:0.14 mm² - 4 mm², AWG: 26 - 12, width: 28.6 mm, height: 28.7 mm, color: brown, mounting type: NS 35/7,5, NS 35/15 Why buy this product  Time savings of up to 80%, thanks to ready-to-mount blocks without manual bridging  Time-saving conductor connection, thanks to tool-free Push-in direct connection technology  Clear wiring, thanks to eleven different color variants  Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting  Space savings of up to 50% on the DIN rail, thanks to transverse mounting Key Commercial Data Packing unit 8 STK Minimum order quantity 8 STK GTIN GTIN 4055626391182 Technical data General Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories Number of levels 1 Number of connections 19 Potentials 1 Nominal cross section 2.5 mm² Nominal cross section feed-in 6 mm² Color brown Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I 06/28/2018   Page 1 / 7 https://www.phoenixcontact.com/pi/products/3273120 Distribution block - PTFIX 6/18X2,5-NS35 BN - 3273120 Technical data General Maximum power dissipation for nominal condition 1.31 W (the value is based on one connection block and is multiplied according to the pin assignment) Maximum load current 24 A Nominal current IN 24 A Nominal voltage UN 500 V Maximum load current 57 A (with 10 mm² conductor cross section) Nominal current IN 41 A (with 6 mm² conductor cross section) Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Surge voltage test setpoint 9.8 kV Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of bending test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.5 mm² / 0.3 kg 2 6 mm / 1.4 kg 10 mm² / 2 kg 0.14 mm² / 0.2 kg 2.5 mm² / 0.7 kg 4 mm² / 0.9 kg Tensile test result Test passed Conductor cross section tensile test 0.5 mm² Tractive force setpoint 20 N Conductor cross section tensile test 6 mm² Tractive force setpoint 80 N Conductor cross section tensile test 10 mm² Tractive force setpoint 90 N Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 5N Result of voltage-drop test Test passed Requirements, voltage drop ≤ 1.6 mV Result of temperature-rise test Test passed Short circuit stability result Test passed 06/28/2018   Page 2 / 7 https://www.phoenixcontact.com/pi/products/3273120 Distribution block - PTFIX 6/18X2,5-NS35 BN - 3273120 Technical data General Conductor cross section short circuit testing 6 mm² Short-time current 0.72 kA Conductor cross section short circuit testing 10 mm² Short-time current 1.2 kA Result of thermal test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 2 2 06/28/2018   Page 3 / 7 https://www.phoenixcontact.com/pi/products/3273120 Distribution block - PTFIX 6/18X2,5-NS35 BN - 3273120 Technical data Dimensions Width 28.6 mm Length 60.7 mm Height 28.7 mm Height NS 35/7,5 32.1 mm Height NS 35/15 39.6 mm Connection data Feed-in connection Feed-in stage Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Connection method Push-in connection Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 10 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 8 Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 6 mm² Min. AWG conductor cross section, flexible 20 Max. AWG conductor cross section, flexible 10 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic sleeve, max. 1.5 mm² 06/28/2018   Page 4 / 7 https://www.phoenixcontact.com/pi/products/3273120 Distribution block - PTFIX 6/18X2,5-NS35 BN - 3273120 Technical data Connection data Stripping length 10 mm ... 12 mm Standards and Regulations Connection in acc. with standard IEC 60947-7-1 IEC 60947-7-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / VDE approval of drawings / IECEE CB Scheme / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 20-8 20-8 20-8 Nominal current IN 50 A 50 A 5A Nominal voltage UN 300 V 300 V 600 V  FILE E 60425 06/28/2018   Page 5 / 7 https://www.phoenixcontact.com/pi/products/3273120 Distribution block - PTFIX 6/18X2,5-NS35 BN - 3273120 Approvals cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D mm²/AWG/kcmil 20-8 20-8 20-8 Nominal current IN 50 A 50 A 5A Nominal voltage UN 300 V 300 V 600 V CSA    http://www.csagroup.org/services-industries/product-listing/   B C D mm²/AWG/kcmil 20-8 20-8 20-8 Nominal current IN 50 A 50 A 5A Nominal voltage UN 300 V 300 V 600 V VDE approval of drawings     Nominal current IN 41 A Nominal voltage UN 630 V IECEE CB Scheme     Nominal current IN 41 A Nominal voltage UN 630 V   40047797  http://www.iecee.org/   cULus Recognized   13631  http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx    FILE E 60425  DE1-60113  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   06/28/2018   Page 6 / 7 https://www.phoenixcontact.com/pi/products/3273120 Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com PHOENIX CONTACT GmbH & Co. KG Flachsmarktstr. 8 32825 Blomberg Germany Tel. +49 5235 300 Fax +49 5235 3 41200 http://www.phoenixcontact.com 06/28/2018   Page 7 / 7