3273148

https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Distribution block, Block with horizontal alignment, the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories, nom. voltage: 690 V, nominal current: 24 A, connection method: Push-in connection, number of connections: 6, cross section: 0.14 mm² - 4 mm², AWG: 26 - 12, width: 16 mm, color: violet, mounting type: NS 35/7,5, NS 35/15 Your advantages  Space savings of up to 50% on the DIN rail, thanks to transverse mounting  Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting  Time-saving conductor connection, thanks to tool-free Push-in direct connection technology  Time savings of up to 80%, thanks to ready-to-mount blocks without manual bridging  Clear wiring, thanks to eleven different color variants Key Commercial Data Packing unit 1 pc Minimum order quantity 10 pc GTIN GTIN 4055626391335 Weight per Piece (excluding packing) 14.000 g Custom tariff number 85369010 Country of origin Poland Technical data General Note Notes on operation the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories Number of levels 1 Number of connections 6 04/20/2021   Page 1 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Technical data General Potentials 1 Nominal cross section 2.5 mm² Color violet Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 8 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.77 W (the value is based on one connection block and is multiplied according to the pin assignment) Maximum load current 32 A Maximum total current 48 A Nominal current IN 24 A Nominal voltage UN 690 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Result of surge voltage test Test passed Result of power-frequency withstand voltage test Test passed Power frequency withstand voltage setpoint 1.89 kV Result of the test for mechanical stability of terminal points (5 x conductor connection) Test passed Result of flexion and pull-out test Test passed Bending test rotation speed 10 rpm Bending test turns 135 Bending test conductor cross section/weight 0.14 mm² / 0.2 kg 2.5 mm² / 0.7 kg Tensile test result Test passed Result of tight fit on support Test passed Tight fit on carrier NS 35 Setpoint 1N Result of voltage-drop test Test passed Result of temperature-rise test Test passed Requirement temperature-rise test Increase in temperature ≤ 45 K Note The max. load current must not be exceeded by the total current of all connected conductors. 04/20/2021   Page 2 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Technical data General Short circuit stability result Test passed Conductor cross section short circuit testing 2.5 mm² Short-time current 0.3 kA Conductor cross section short circuit testing 4 mm² Short-time current 0.48 kA Result of thermal test Test passed Proof of thermal characteristics (needle flame) effective duration 30 s Result of aging test Test passed Ageing test for screwless modular terminal block temperature cycles 192 Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Smoke gas toxicity NFPA 130 (SMP 800C) passed Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions 04/20/2021   Page 3 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Technical data Dimensions Width 16 mm Length 45.7 mm Height NS 35/7,5 30.9 mm Connection data Connection method Push-in connection Stripping length 8 mm ... 10 mm Connection in acc. with standard IEC 60947-7-1 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Connection cross sections directly pluggable 0.34 mm² 4 mm² 24 12 Conductor cross section solid min. 0.34 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible, with ferrule without plastic sleeve min. 0.34 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.34 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Internal cylindrical gage A3 Ambient conditions Operating temperature -60 °C ... 105 °C (max. short-term operating temperature 130°C) Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) Permissible humidity (storage/transport) 30 % ... 70 % Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 04/20/2021   Page 4 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Technical data Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Classifications eCl@ss eCl@ss 10.0.1 27141120 eCl@ss 11.0 27141120 eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 6.0 EC000897 ETIM 7.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 UNSPSC 18.0 39121410 UNSPSC 19.0 39121410 UNSPSC 20.0 39121410 UNSPSC 21.0 39121410 04/20/2021   Page 5 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Approvals Approvals Approvals DNV GL / CSA / UL Recognized / cUL Recognized / IECEE CB Scheme / EAC / EAC / LR / BV / VDE Zeichengenehmigung / cULus Recognized Ex Approvals Approval details DNV GL    https://approvalfinder.dnvgl.com/     Nominal voltage UN 500 V Nominal current IN 24 A CSA    TAE00002TT  http://www.csagroup.org/services-industries/product-listing/   B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 20 A 20 A 5A mm²/AWG/kcmil 26-12 26-12 26-12 UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D Nominal voltage UN 300 V 300 V 600 V Nominal current IN 20 A 20 A 5A mm²/AWG/kcmil 26-12 26-12 26-12 cUL Recognized    13631  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   B C D Nominal voltage UN 300 V 300 V 600 V  FILE E 60425  FILE E 60425 04/20/2021   Page 6 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Approvals   B C D Nominal current IN 20 A 20 A 5A mm²/AWG/kcmil 26-12 26-12 26-12 IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 690 V Nominal current IN 24 A  DE1-62701 EAC      RU CDE.AI30.B.01102 EAC      RU CDE.BL08.B.00644 LR    http://www.lr.org/en  LR2002627TA BV    http://www.veristar.com/portal/veristarinfo/generalinfo/ approved/approvedProducts/equipmentAndMaterials  59146/A0 BV VDE Zeichengenehmigung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx  40047797     Nominal voltage UN 690 V Nominal current IN 24 A cULus Recognized       04/20/2021   Page 7 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Accessories Bridge Wire bridge - FBSW 2-5/250MM - 3030172 Wire bridge, length: 250 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/60MM - 3030170 Wire bridge, length: 60 mm, width: 5.1 mm, number of positions: 1, color: red/black     Wire bridge - FBSW 2-5/110MM - 3030171 Wire bridge, length: 110 mm, width: 5.1 mm, number of positions: 1, color: red/black     DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/20/2021   Page 8 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     04/20/2021   Page 9 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     04/20/2021   Page 10 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     04/20/2021   Page 11 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     04/20/2021   Page 12 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Insulating sleeve - ISH 2,5/0,2 - 3002843 Insulating sleeve, color: white     04/20/2021   Page 13 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Insulating sleeve - ISH 2,5/0,5 - 3002856 Insulating sleeve, color: gray     Insulating sleeve - ISH 2,5/1,0 - 3002869 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-5 GN - 3032143 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green     Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue     04/20/2021   Page 14 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Plug-in bridge - FBS 2-5 GY - 3038969 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: gray     Labeled terminal marker Marker card - SK 2,8 REEL P5,2 WH CUS - 8199986 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 2.8 mm     Marker card - SK 3,8 REEL P5,2 WH CUS - 8199989 Marker card, Card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5.2 mm, lettering field size: continuous x 3.8 mm     Marker carriers Terminal strip marker carrier - KLM 2 - 0807575 Terminal strip marker carrier, gray, unlabeled, mounting type: plug in, lettering field size: 20 mm x 8 mm     Terminal strip marker carrier - KLM 3-L - 0814788 Terminal strip marker carrier, height-adjustable, for end brackets CLIPFIX 15, CLIPFIX 35 and CLIPFIX 35-5, can be labeled with BMK...20 x 8 labels, or directly with the M-PEN or X-PEN     04/20/2021   Page 15 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Marking foil for zack marker strip - TML (EX3,8)R - 0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000 x 3.8 mm, Number of individual labels: 1     Marking foil for zack marker strip - TML (104X3,8)R - 0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels: 2500     Marking foil for zack marker strip - TML (104X2,8)R - 0801832 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels: 2500     04/20/2021   Page 16 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Marking foil for zack marker strip - TML (EX2,8)R - 0801836 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30000 x 2.8 mm, Number of individual labels: 1     Marker for terminal blocks - US-TML (104X3,8) - 0830768 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 3.8 mm, Number of individual labels: 22     Marker for terminal blocks - US-TML (104X2,8) - 0830767 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 2.8 mm, Number of individual labels: 26     Marker card - SK U/3,8 WH:UNBEDRUCKT - 0803906 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440     Marker card - SK U/2,8 WH:UNBEDRUCKT - 0803883 Marker card, Sheet, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600     04/20/2021   Page 17 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Label - MM-TML (EX3,8)R C1 WH/BK - 1092026 Label, Roll, white, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: adhesive, for terminal block width: 8000 mm, lettering field size: continuous x 3.8 mm     Test plug terminal block Test plugs - MPS-MT SN - 3212251 Test plugs, with solder connection up to 1 mm² conductor cross section, tin-plated surface, color: silver     Test plugs - MPS-MT 1-S - 1944372 Test plug, consisting of 1.0 mm Ø test pin and 2.0 mm Ø socket     Test plugs - MPS-MT - 0201744 Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray     Test socket Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     04/20/2021   Page 18 / 19 https://www.phoenixcontact.com/us/products/3273148 Distribution block - PTFIX 6X2,5-NS35A VT - 3273148 Accessories Phoenix Contact 2021 © - all rights reserved http://www.phoenixcontact.com 04/20/2021   Page 19 / 19