3273402

https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Distribution block, Basic terminal block, nom. voltage: 500 V, nominal current: 24 A, connection method: Pushin connection, number of connections: 6, cross section:0.14 mm² - 4 mm², AWG: 26 - 12, width: 15.6 mm, height: 21.2 mm, color: green, mounting type: adhesive Why buy this product  Time savings of up to 80%, thanks to ready-to-mount blocks without manual bridging  Time-saving conductor connection, thanks to tool-free Push-in direct connection technology  Clear wiring, thanks to eleven different color variants  Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting  Space savings of up to 50% on the DIN rail, thanks to transverse mounting Key Commercial Data Packing unit 1 STK Minimum order quantity 10 STK GTIN GTIN 4055626392738 Weight per Piece (excluding packing) 12.000 g Custom tariff number 85369010 Country of origin Poland Technical data General Note Notes on operation The blocks can be bridged with one another via the conductor shaft. For corresponding plug-in bridges, see accessories Number of levels 1 Number of connections 6 Potentials 1 Nominal cross section 2.5 mm² Color green Insulating material PA 07/16/2018   Page 1 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Technical data General Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Maximum power dissipation for nominal condition 0.77 W (the value is based on one connection block and is multiplied according to the pin assignment) Maximum load current 24 A Nominal current IN 24 A Nominal voltage UN 500 V Open side panel No Shock protection test specification DIN EN 50274 (VDE 0660-514):2002-11 Back of the hand protection guaranteed Finger protection guaranteed Oscillation, broadband noise test result Test passed Test specification, oscillation, broadband noise DIN EN 50155 (VDE 0115-200):2008-03 Test spectrum Service life test category 2, bogie-mounted Test frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s ) /Hz Acceleration 3.12 g Test duration per axis 5h Test directions X-, Y- and Z-axis Shock test result Test passed Test specification, shock test DIN EN 50155 (VDE 0115-200):2008-03 Shock form Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Relative insulation material temperature index (Elec., UL 746 B) 130 °C 2 2 Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Static insulating material application in cold -60 °C Behavior in fire for rail vehicles (DIN 5510-2) Test passed Flame test method (DIN EN 60695-11-10) V0 Oxygen index (DIN EN ISO 4589-2) >32 % NF F16-101, NF F10-102 Class I 2 NF F16-101, NF F10-102 Class F 2 07/16/2018   Page 2 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Technical data General Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Dimensions Width 15.6 mm Length 28.2 mm Height 21.2 mm Connection data Connection method Push-in connection Connection in acc. with standard IEC 60998-2-2 Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 12 Conductor cross section flexible min. 0.14 mm² Conductor cross section flexible max. 2.5 mm² Min. AWG conductor cross section, flexible 26 Max. AWG conductor cross section, flexible 14 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 2.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.14 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 2.5 mm² Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Standards and Regulations Connection in acc. with standard IEC 60998-2-2 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 HL 1 - HL 3 07/16/2018   Page 3 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Technical data Environmental Product Compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27141121 eCl@ss 4.1 27141121 eCl@ss 5.0 27141120 eCl@ss 5.1 27141120 eCl@ss 6.0 27141100 eCl@ss 7.0 27141120 eCl@ss 8.0 27141120 eCl@ss 9.0 27141120 ETIM ETIM 3.0 EC000897 ETIM 4.0 EC000897 ETIM 5.0 EC000897 ETIM 6.0 EC000897 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals 07/16/2018   Page 4 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Approvals Approvals UL Recognized / cUL Recognized / CSA / VDE approval of drawings / IECEE CB Scheme / cULus Recognized Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   D B C Nominal voltage UN 600 V 300 V 300 V Nominal current IN 5A 20 A 20 A mm²/AWG/kcmil 26-12 26-12 26-12 cUL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   D B C Nominal voltage UN 600 V 300 V 300 V Nominal current IN 5A 20 A 20 A mm²/AWG/kcmil 26-12 26-12 26-12 CSA    http://www.csagroup.org/services-industries/product-listing/   D B C Nominal voltage UN 600 V 300 V 300 V Nominal current IN 5A 20 A 20 A mm²/AWG/kcmil 26-12 26-12 26-12 VDE approval of drawings    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 450 V Nominal current IN 24 A  FILE E 60425  FILE E 60425  13631  40047798 07/16/2018   Page 5 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Approvals IECEE CB Scheme    http://www.iecee.org/     Nominal voltage UN 450 V Nominal current IN 24 A cULus Recognized    DE1-60115  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm   Accessories Accessories DIN rail DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     07/16/2018   Page 6 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421 DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762 DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     07/16/2018   Page 7 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories End cap - NS 35/ 7,5 CAP - 1206560 DIN rail end piece, for DIN rail NS 35/7.5     DIN rail perforated - NS 35/15 PERF 2000MM - 1201730 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, passivated with a thick layer, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized, white passivated, length: 2000 mm, color: white     07/16/2018   Page 8 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum, uncoated, length: 2000 mm, color: silver     DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599 DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized, length: 2000 mm, color: silver     DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895 DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated, length: 2000 mm, color: copper-colored     End cap - NS 35/15 CAP - 1206573 DIN rail end piece, for DIN rail NS 35/15     Filler plug 07/16/2018   Page 9 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories Filler plugs - CEC 2,5 - 3062757 Cover for conductor shaft, 10-pos., for spring cage terminal blocks (ST) and terminal blocks with push-in technology (PT) with a width of 5.2 mm     Insulating sleeve Insulating sleeve - MPS-IH WH - 0201663 Insulating sleeve, color: white     Insulating sleeve - MPS-IH RD - 0201676 Insulating sleeve, color: red     Insulating sleeve - MPS-IH BU - 0201689 Insulating sleeve, color: blue     Insulating sleeve - MPS-IH YE - 0201692 Insulating sleeve, color: yellow     07/16/2018   Page 10 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories Insulating sleeve - MPS-IH GN - 0201702 Insulating sleeve, color: green     Insulating sleeve - MPS-IH GY - 0201728 Insulating sleeve, color: gray     Insulating sleeve - MPS-IH BK - 0201731 Insulating sleeve, color: black     Insulating sleeve - ISH 2,5/0,2 - 3002843 Insulating sleeve, color: white     Insulating sleeve - ISH 2,5/0,5 - 3002856 Insulating sleeve, color: gray     07/16/2018   Page 11 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories Insulating sleeve - ISH 2,5/1,0 - 3002869 Insulating sleeve, color: black     Jumper Plug-in bridge - FBS 2-5 - 3030161 Plug-in bridge, pitch: 5.2 mm, length: 22.7 mm, width: 9 mm, number of positions: 2, color: red     Plug-in bridge - FBS 2-5 GN - 3032143 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green     Plug-in bridge - FBS 2-5 BU - 3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue     Plug-in bridge - FBS 2-5 GY - 3038969 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: gray     07/16/2018   Page 12 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories Labeled terminal marker Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183 Marker card, Card, white, labeled, Horizontal: consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: 5 x 3.8 mm     Marker card - SK 3,8 REEL P5 WH CUS - 0825124 Marker card, can be ordered: By card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 5 mm, lettering field size: continuous x 3.8 mm     Marker carriers Terminal strip marker carrier - KLM 2 - 0807575 Terminal strip marker carrier, gray, unlabeled, mounting type: Plug in, lettering field size: 20 mm x 8 mm     Terminal strip marker carrier - KLM 3-L - 0814788 Terminal strip marker carrier, height-adjustable, for end brackets CLIPFIX 15, CLIPFIX 35 and CLIPFIX 35-5, can be labeled with BMK...20 x 8 labels, or directly with the M-PEN or X-PEN     Mounting material 07/16/2018   Page 13 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories DIN rail adapter - PTFIX-NS35 - 3274054 DIN rail adapter, width: 28.6 mm, height: 11 mm, color: gray, mounting type: NS 35/7,5, NS 35/15     DIN rail adapter - PTFIX-NS15A - 3274058 DIN rail adapter, width: 10.3 mm, height: 10.8 mm, color: gray, mounting type: NS 15     DIN rail adapter - PTFIX-NS15A-FIX - 3274059 DIN rail adapter, with end stop function, width: 10.3 mm, height: 10.8 mm, color: gray, mounting type: NS 15     Screwdriver tools Screwdriver - SZF 1-0,6X3,5 - 1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2component grip, with non-slip grip     Terminal marking Marking foil for zack marker strip - TML (EX3,8)R - 0801837 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: 30,000 x 3.8 mm     07/16/2018   Page 14 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories Marking foil for zack marker strip - TML (104X3,8)R - 0801833 Marking foil for zack marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm     Test plug terminal block Test plugs - MPS-MT SN - 3212251 Test plugs, with solder connection up to 1 mm² conductor cross section, tin-plated surface, color: silver     Test plugs - MPS-MT 1-S - 1944372 Test plugs, consisting of Ø 1 mm test pin, 150 mm conductor length, and Ø 2 mm socket     Test plugs - MPS-MT - 0201744 , rated voltage (III/2): , nominal current (Ex): , nominal voltage (Ex): , number of positions: 1, pitch: 5 mm, connection method: , mounting: ,     Test socket 07/16/2018   Page 15 / 16 https://www.phoenixcontact.com/us/products/3273402 Distribution block - PTFIX 6X2,5-G GN - 3273402 Accessories Test adapter - PAI-4-N GY - 3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 07/16/2018   Page 16 / 16