3273444

PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Distribution block, Basic terminal block, nom. voltage: 450 V, nominal current: 24 A, number of connections: 18, connection method: Push-in connection, cross section: 0.14 mm2 - 4 mm2, mounting type: adhesive, color: yellow Your advantages • Space savings of up to 50 % on the DIN rail, thanks to transverse mounting • Clear wiring, thanks to eleven different color variants • Time savings of up to 80 %, thanks to ready-to-mount blocks without manual bridging • Time-saving conductor connection, thanks to tool-free Push-in direct connection technology • Flexible use, thanks to DIN rail mounting, direct mounting or adhesive mounting Commercial data Item number 3273444 Packing unit 1 pc Minimum order quantity 8 pc Sales key BE09 Product key BEA115 Catalog page Page 440 (C-1-2019) GTIN 4055626392967 Weight per piece (including packing) 34.61 g Weight per piece (excluding packing) 34.61 g Customs tariff number 85369010 Country of origin PL Jan 8, 2024, 10:44 AM Page 1 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Technical data Notes General the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories General Note The maximum load current of a single clamping unit must not be exceeded. Product properties Product type Distributor terminal block Number of connections 18 Number of rows 1 Potentials 1 Insulation characteristics Overvoltage category III Degree of pollution 3 Electrical properties Rated surge voltage 6 kV Maximum power dissipation for nominal condition 0.77 W Connection data Number of connections per level 18 Nominal cross section 2.5 mm² Rated cross section AWG 12 Stripping length 8 mm ... 10 mm Internal cylindrical gage A3 Connection in acc. with standard IEC 60998-2-2 Conductor cross section rigid 0.14 mm² ... 4 mm² Cross section AWG 26 ... 12 (converted acc. to IEC) Conductor cross section flexible 0.14 mm² ... 2.5 mm² Conductor cross section, flexible [AWG] 26 ... 14 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve) 0.14 mm² ... 2.5 mm² Flexible conductor cross section (ferrule with plastic sleeve) 0.14 mm² ... 2.5 mm² Nominal current 24 A Maximum load current 32 A Maximum total current 48 A Nominal voltage 450 V Connection cross sections directly pluggable Conductor cross section rigid 0.34 mm² ... 4 mm² Conductor cross section, rigid [AWG] 24 ... 12 (converted acc. to IEC) Jan 8, 2024, 10:44 AM Page 2 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Conductor cross-section flexible (ferrule without plastic sleeve) 0.34 mm² ... 2.5 mm² Flexible conductor cross section (ferrule with plastic sleeve) 0.34 mm² ... 2.5 mm² Dimensions Width 46.9 mm Height 28.6 mm Depth 22.7 mm Material specifications Color yellow Flammability rating according to UL 94 V0 Insulating material group I Insulating material PA Static insulating material application in cold -60 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Relative insulation material temperature index (Elec., UL 746 B) 130 °C Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Mechanical properties Mechanical data Open side panel No Mechanical tests Attachment on the carrier Result Test passed Note When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks. For versions with 6 or 7 connections, it is enough to place one DIN rail adapter centrally per block and place flange elements after every other block. When using the DIN rail adapter PTFIX-NS35, an aligned block must not protrude by more than a half. Environmental and real-life conditions Needle-flame test Time of exposure 30 s Jan 8, 2024, 10:44 AM Page 3 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Result Test passed Oscillation/broadband noise Specification DIN EN 50155 (VDE 0115-200):2008-03 Spectrum Service life test category 2, bogie-mounted Frequency f1 = 5 Hz to f2 = 250 Hz ASD level 6.12 (m/s²)²/Hz Acceleration 3.12g Test duration per axis 5h Test directions X-, Y- and Z-axis Result Test passed Shocks Specification DIN EN 50155 (VDE 0115-200):2008-03 Pulse shape Half-sine Acceleration 30g Shock duration 18 ms Number of shocks per direction 3 Test directions X-, Y- and Z-axis (pos. and neg.) Result Test passed Ambient conditions Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Permissible humidity (storage/transport) 30 % ... 70 % Standards and regulations Connection in acc. with standard IEC 60998-2-2 Mounting Mounting type adhesive Jan 8, 2024, 10:44 AM Page 4 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Drawings Circuit diagram Jan 8, 2024, 10:44 AM Page 5 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/3273444  CSA Approval ID: 13631 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 300 V 20 A 26 - 12 - 300 V 20 A 26 - 12 - 600 V 5A 26 - 12 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 450 V 24 A - - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 450 V 24 A - - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 300 V 20 A 26 - 12 - 300 V 20 A 26 - 12 - 600 V 5A 26 - 12 - Use group B Use group C Use group D IECEE CB Scheme   Approval ID: DE1-63085 EAC Approval ID: RU C-DE.BL08.B.00644    LR Approval ID: LR2002627TA VDE Zeichengenehmigung Approval ID: 40047798 cULus Recognized Approval ID: E60425 Use group B Use group C Use group D Jan 8, 2024, 10:44 AM Page 6 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Classifications ECLASS ECLASS-11.0 27141120 ECLASS-13.0 27250118 ETIM ETIM 9.0 EC000897 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 10:44 AM Page 7 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Jan 8, 2024, 10:44 AM Page 8 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 Accessories Note: Applying some accessories below might limit this product. FBS 2-5 - Plug-in bridge 3030161 https://www.phoenixcontact.com/us/products/3030161 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, length: 23 mm, color: red Max. current carrying capacity: 24 A FBS 2-5 GN - Plug-in bridge 3032143 https://www.phoenixcontact.com/us/products/3032143 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: green Max. current carrying capacity: 24 A Jan 8, 2024, 10:44 AM Page 9 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 FBS 2-5 BU - Plug-in bridge 3036877 https://www.phoenixcontact.com/us/products/3036877 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: blue Max. current carrying capacity: 24 A FBS 2-5 GY - Plug-in bridge 3038969 https://www.phoenixcontact.com/us/products/3038969 Plug-in bridge, pitch: 5.2 mm, number of positions: 2, color: gray Max. current carrying capacity: 24 A Jan 8, 2024, 10:44 AM Page 10 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 KLM 2 - Terminal strip marker carrier 0807575 https://www.phoenixcontact.com/us/products/0807575 Terminal strip marker carrier, adjustable height, for CLIPFIX 15, CLIPFIX 35, and CLIPFIX 35-5 end brackets, can be marked using snap-in labels KLM 3-L - Terminal strip marker carrier 0814788 https://www.phoenixcontact.com/us/products/0814788 Terminal strip marker carrier, adjustable height, for CLIPFIX 15, CLIPFIX 35, and CLIPFIX 35-5 end brackets, can be marked using labels in 20 x 8 mm format Jan 8, 2024, 10:44 AM Page 11 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 MPS-MT 1-S - Test plug 1944372 https://www.phoenixcontact.com/us/products/1944372 Test plug, consisting of 1.0 mm Ø test pin and 2.0 mm Ø socket PAI-4-N GY - Test adapter 3032871 https://www.phoenixcontact.com/us/products/3032871 4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch Jan 8, 2024, 10:44 AM Page 12 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 MPS-MT - Test plug 0201744 https://www.phoenixcontact.com/us/products/0201744 Test plug, with solder connection up to 1 mm2 conductor cross section, number of positions: 1, color: gray MPS-IH WH - Insulating sleeve 0201663 https://www.phoenixcontact.com/us/products/0201663 Insulating sleeve, color: white Jan 8, 2024, 10:44 AM Page 13 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 MPS-IH RD - Insulating sleeve 0201676 https://www.phoenixcontact.com/us/products/0201676 Insulating sleeve, color: red MPS-IH BU - Insulating sleeve 0201689 https://www.phoenixcontact.com/us/products/0201689 Insulating sleeve, color: blue Jan 8, 2024, 10:44 AM Page 14 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 MPS-IH YE - Insulating sleeve 0201692 https://www.phoenixcontact.com/us/products/0201692 Insulating sleeve, color: yellow MPS-IH GN - Insulating sleeve 0201702 https://www.phoenixcontact.com/us/products/0201702 Insulating sleeve, color: green Jan 8, 2024, 10:44 AM Page 15 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 MPS-IH GY - Insulating sleeve 0201728 https://www.phoenixcontact.com/us/products/0201728 Insulating sleeve, color: gray MPS-IH BK - Insulating sleeve 0201731 https://www.phoenixcontact.com/us/products/0201731 Insulating sleeve, color: black Jan 8, 2024, 10:44 AM Page 16 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 ISH 2,5/0,2 - Insulating sleeve 3002843 https://www.phoenixcontact.com/us/products/3002843 Insulating sleeve, color: white ISH 2,5/0,5 - Insulating sleeve 3002856 https://www.phoenixcontact.com/us/products/3002856 Insulating sleeve, color: gray Jan 8, 2024, 10:44 AM Page 17 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 ISH 2,5/1,0 - Insulating sleeve 3002869 https://www.phoenixcontact.com/us/products/3002869 Insulating sleeve, color: black SK 3,8 REEL P4,15 WH CUS - Marker card 0825990 https://www.phoenixcontact.com/us/products/0825990 Marker card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 3.8 mm Jan 8, 2024, 10:44 AM Page 18 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 TML (EX3,8)R - Marker strip 0801837 https://www.phoenixcontact.com/us/products/0801837 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, lettering field size: continuous x 3.8 mm, Number of individual labels: 12 TML (104X3,8)R - Marker strip 0801833 https://www.phoenixcontact.com/us/products/0801833 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels: 2500 Jan 8, 2024, 10:44 AM Page 19 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 TML (104X2,8)R - Marker strip 0801832 https://www.phoenixcontact.com/us/products/0801832 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels: 2500 TML (EX2,8)R - Marker strip 0801836 https://www.phoenixcontact.com/us/products/0801836 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: continuous x 2.8 mm, Number of individual labels: 14 Jan 8, 2024, 10:44 AM Page 20 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 SK 2,8 REEL P4,15 WH CUS - Marker card 8199987 https://www.phoenixcontact.com/us/products/8199987 Marker card, can be ordered: by card, white, labeled according to customer specifications, mounting type: adhesive, for terminal block width: 4.15 mm, lettering field size: continuous x 2.8 mm US-TML (104X3,8) - Marker for terminal blocks 0830768 https://www.phoenixcontact.com/us/products/0830768 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 3.8 mm, Number of individual labels: 22 Jan 8, 2024, 10:44 AM Page 21 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 US-TML (104X2,8) - Marker for terminal blocks 0830767 https://www.phoenixcontact.com/us/products/0830767 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 2.8 mm, Number of individual labels: 26 SK U/3,8 WH:UNBEDRUCKT - Marker card 0803906 https://www.phoenixcontact.com/us/products/0803906 Marker card, Din A4, white, unlabeled, can be labeled with: PLOTMARK, CMSP1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440 Jan 8, 2024, 10:44 AM Page 22 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 SK U/2,8 WH:UNBEDRUCKT - Marker card 0803883 https://www.phoenixcontact.com/us/products/0803883 Marker card, Din A4, white, unlabeled, can be labeled with: PLOTMARK, CMSP1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600 MM-TML (EX3,8)R C1 WH/BK - Label 1092026 https://www.phoenixcontact.com/us/products/1092026 Label, Roll, white/black, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: adhesive, lettering field size: continuous x 2.8 mm, Number of individual labels: 1 Jan 8, 2024, 10:44 AM Page 23 (24) PTFIX 18X2,5-G YE - Distribution block 3273444 https://www.phoenixcontact.com/us/products/3273444 MPS-MT SN - Test plug 3212251 https://www.phoenixcontact.com/us/products/3212251 Test plug, with solder connection up to 1 mm2 conductor cross section, tin-plated surface, number of positions: 1, color: silver SZF 1-0,6X3,5 - Screwdriver 1204517 https://www.phoenixcontact.com/us/products/1204517 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 10:44 AM Page 24 (24)