3273922

PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Please be informed that the data shown in this PDF document is generated from our online catalog. Please find the complete data in the user documentation. Our general terms of use for downloads are valid. Distribution block, Basic terminal block, nom. voltage: 450 V, nominal current: 32 A, number of connections: 6, connection method: Push-in connection, cross section: 0.2 mm2 - 6 mm2, mounting type: adhesive, color: gray Commercial data Item number 3273922 Packing unit 1 pc Minimum order quantity 10 pc Sales key BE09 Product key BEA113 Catalog page Page 448 (C-1-2019) GTIN 4055626646947 Weight per piece (including packing) 16.54 g Weight per piece (excluding packing) 15.74 g Customs tariff number 85369010 Country of origin PL Jan 8, 2024, 10:37 AM Page 1 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Technical data Notes General the blocks can be bridged with one another via the conductor shaft, for corresponding plug-in bridges, see accessories General Note The maximum load current of a single clamping unit must not be exceeded. Product properties Product type Distributor terminal block Number of connections 6 Number of rows 1 Insulation characteristics Overvoltage category III Degree of pollution 3 Electrical properties Rated surge voltage 6 kV Maximum power dissipation for nominal condition 1.02 W Connection data Number of connections per level 6 Nominal cross section 4 mm² Rated cross section AWG 12 Stripping length 10 mm ... 12 mm Internal cylindrical gage A4 Connection in acc. with standard IEC 60998-2-2 Conductor cross section rigid 0.2 mm² ... 6 mm² Cross section AWG 24 ... 10 (converted acc. to IEC) Conductor cross section flexible 0.2 mm² ... 4 mm² Conductor cross section, flexible [AWG] 24 ... 12 (converted acc. to IEC) Conductor cross-section flexible (ferrule without plastic sleeve) 0.2 mm² ... 4 mm² Flexible conductor cross section (ferrule with plastic sleeve) 0.2 mm² ... 4 mm² 2 conductors with the same cross section, flexible, with TWIN ferrule with plastic sleeve 0.5 mm² ... 1 mm² Nominal current 32 A Maximum load current 63 A Maximum total current 41 A Nominal voltage 450 V Connection cross sections directly pluggable Conductor cross section rigid 0.5 mm² ... 6 mm² Conductor cross section, rigid [AWG] 20 ... 10 (converted acc. to IEC) Jan 8, 2024, 10:37 AM Page 2 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Conductor cross-section flexible (ferrule without plastic sleeve) 0.75 mm² ... 4 mm² Flexible conductor cross section (ferrule with plastic sleeve) 0.5 mm² ... 4 mm² Dimensions Width 18.5 mm Height 28.6 mm Depth 22.7 mm Material specifications Color gray Flammability rating according to UL 94 V0 Insulating material group I Insulating material PA Static insulating material application in cold -60 °C Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C Relative insulation material temperature index (Elec., UL 746 B) 130 °C Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Calorimetric heat release NFPA 130 (ASTM E 1354) 28 MJ/kg Surface flammability NFPA 130 (ASTM E 162) passed Specific optical density of smoke NFPA 130 (ASTM E 662) passed Smoke gas toxicity NFPA 130 (SMP 800C) passed Mechanical properties Mechanical data Open side panel No Mechanical tests Attachment on the carrier Result Test passed Note When aligning several blocks, it is recommended to either place a DIN rail adapter underneath the connection point or a flange element between the blocks. For versions with 6 or 7 connections, it is enough to place one DIN rail adapter centrally per block and place flange elements after every other block. When using the DIN rail adapter PTFIX-NS35, an aligned block must not protrude by more than a half. Environmental and real-life conditions Needle-flame test Time of exposure 30 s Jan 8, 2024, 10:37 AM Page 3 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Result Test passed Ambient conditions Ambient temperature (storage/transport) -25 °C ... 60 °C (for a short time, not exceeding 24 h, -60 °C to +70 °C) Ambient temperature (assembly) -5 °C ... 70 °C Ambient temperature (actuation) -5 °C ... 70 °C Permissible humidity (storage/transport) 30 % ... 70 % Standards and regulations Connection in acc. with standard IEC 60998-2-2 Mounting Mounting type adhesive Jan 8, 2024, 10:37 AM Page 4 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Drawings Circuit diagram Jan 8, 2024, 10:37 AM Page 5 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Approvals To download certificates, visit the product detail page: https://www.phoenixcontact.com/us/products/3273922 DNV Approval ID: TAE00002TT-04  Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 500 V 24 A - - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 32 A 24 - 10 - 600 V 32 A 24 - 10 - Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 450 V 32 A - -4 Nominal voltage UN Nominal current IN Cross section AWG Cross section mm2 600 V 32 A 24 - 10 - CSA Approval ID: 13631 Use group B Use group C IECEE CB Scheme   Approval ID: DE1-63087 EAC Approval ID: RU C-DE.BL08.B.00644 LR   Approval ID: LR2002627TA BV Approval ID: 59146/A0 BV   VDE Zeichengenehmigung Approval ID: 40047798 cULus Recognized Approval ID: E60425 Use group B Use group C Jan 8, 2024, 10:37 AM Page 6 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 600 V 32 A 24 - 10 - Jan 8, 2024, 10:37 AM Page 7 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Classifications ECLASS ECLASS-11.0 27141120 ECLASS-13.0 27250118 ETIM ETIM 9.0 EC000897 UNSPSC UNSPSC 21.0 39121400 Jan 8, 2024, 10:37 AM Page 8 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Environmental product compliance China RoHS Environmentally friendly use period: unlimited = EFUP-e No hazardous substances above threshold values Jan 8, 2024, 10:37 AM Page 9 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 Accessories FBS 2-6 - Plug-in bridge 3030336 https://www.phoenixcontact.com/us/products/3030336 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: red FBS 2-6 GY - Plug-in bridge 3032237 https://www.phoenixcontact.com/us/products/3032237 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: gray Jan 8, 2024, 10:37 AM Page 10 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 FBS 2-6 BU - Plug-in bridge 3036932 https://www.phoenixcontact.com/us/products/3036932 Plug-in bridge, pitch: 6.2 mm, number of positions: 2, color: blue SK 6,2/3,8:FORTL.ZAHLEN - Marker card 0804374 https://www.phoenixcontact.com/us/products/0804374 Marker card, white, labeled, horizontal: consecutive numbers 1 ... 10, 11 ... 20, etc. up to 91 ... (99)100, mounting type: adhesive, for terminal block width: 6.2 mm, lettering field size: 6.2 x 3.8 mm Jan 8, 2024, 10:37 AM Page 11 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 SK 6,2/3,8:FORTL.ZAHLEN 1-10 - Marker for terminal blocks 0804374:0001 https://www.phoenixcontact.com/us/products/0804374:0001 Marker card, self-adhesive, horizontally labeled with the consecutive numbers: 1 ... 10, 10-section marker strips with 12 identical decades, white, for terminal block width: 6.2 mm, mounting type: adhesive SK 6,2/3,8:FORTL.ZAHLEN 11-20 - Marker for terminal blocks 0804374:0011 https://www.phoenixcontact.com/us/products/0804374:0011 Marker card, self-adhesive, horizontally labeled with the consecutive numbers: 11 ... 20, 10-section marker strips with 12 identical decades, white, for terminal block width: 6.2 mm, mounting type: adhesive Jan 8, 2024, 10:37 AM Page 12 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 SK 6,2/3,8:FORTL.ZAHLEN 21-30 - Marker for terminal blocks 0804374:0021 https://www.phoenixcontact.com/us/products/0804374:0021 Marker card, self-adhesive, horizontally labeled with the consecutive numbers: 21 ... 30, 10-section marker strips with 12 identical decades, white, for terminal block width: 6.2 mm, mounting type: adhesive SK 6,2/3,8:FORTL.ZAHLEN 31-40 - Marker for terminal blocks 0804374:0031 https://www.phoenixcontact.com/us/products/0804374:0031 Marker card, self-adhesive, horizontally labeled with the consecutive numbers: 31 ... 40, 10-section marker strips with 12 identical decades, white, for terminal block width: 6.2 mm, mounting type: adhesive Jan 8, 2024, 10:37 AM Page 13 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 SK 6,2/3,8:FORTL.ZAHLEN 41-50 - Marker for terminal blocks 0804374:0041 https://www.phoenixcontact.com/us/products/0804374:0041 Marker card, self-adhesive, horizontally labeled with the consecutive numbers: 41 ... 50, 10-section marker strips with 12 identical decades, white, for terminal block width: 6.2 mm, mounting type: adhesive US-TML (104X3,8) - Marker for terminal blocks 0830768 https://www.phoenixcontact.com/us/products/0830768 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 3.8 mm, Number of individual labels: 22 Jan 8, 2024, 10:37 AM Page 14 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 US-TML (104X2,8) - Marker for terminal blocks 0830767 https://www.phoenixcontact.com/us/products/0830767 Marker for terminal blocks, Card, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, THERMOMARK PRIME, THERMOMARK CARD 2.0, THERMOMARK CARD, mounting type: adhesive, lettering field size: 104 x 2.8 mm, Number of individual labels: 26 SK U/3,8 WH:UNBEDRUCKT - Marker card 0803906 https://www.phoenixcontact.com/us/products/0803906 Marker card, Din A4, white, unlabeled, can be labeled with: PLOTMARK, CMSP1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 3.8 mm, Number of individual labels: 1440 Jan 8, 2024, 10:37 AM Page 15 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 SK U/2,8 WH:UNBEDRUCKT - Marker card 0803883 https://www.phoenixcontact.com/us/products/0803883 Marker card, Din A4, white, unlabeled, can be labeled with: PLOTMARK, CMSP1-PLOTTER, Office printing systems, mounting type: adhesive, for terminal block width: 210 mm, lettering field size: 186 x 2.8 mm, Number of individual labels: 3600 TML (EX3,8)R - Marker strip 0801837 https://www.phoenixcontact.com/us/products/0801837 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, lettering field size: continuous x 3.8 mm, Number of individual labels: 12 Jan 8, 2024, 10:37 AM Page 16 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 TML (104X3,8)R - Marker strip 0801833 https://www.phoenixcontact.com/us/products/0801833 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 3.8 mm, Number of individual labels: 2500 TML (104X2,8)R - Marker strip 0801832 https://www.phoenixcontact.com/us/products/0801832 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 104 mm, lettering field size: 104 x 2.8 mm, Number of individual labels: 2500 Jan 8, 2024, 10:37 AM Page 17 (18) PTFIX 6X4-G GY - Distribution block 3273922 https://www.phoenixcontact.com/us/products/3273922 TML (EX2,8)R - Marker strip 0801836 https://www.phoenixcontact.com/us/products/0801836 Marker strip, Roll, white, unlabeled, can be labeled with: THERMOMARK E.300 (D)/600 (D), THERMOMARK ROLL 2.0, THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, mounting type: adhesive, for terminal block width: 30000 mm, lettering field size: continuous x 2.8 mm, Number of individual labels: 14 MM-TML (EX3,8)R C1 WH/BK - Label 1092026 https://www.phoenixcontact.com/us/products/1092026 Label, Roll, white/black, unlabeled, can be labeled with: THERMOFOX, THERMOMARK GO, THERMOMARK GO.K, mounting type: adhesive, lettering field size: continuous x 2.8 mm, Number of individual labels: 1 Phoenix Contact 2024 © - all rights reserved https://www.phoenixcontact.com Phoenix Contact USA 586 Fulling Mill Road Middletown, PA 17057, United States (+717) 944-1300 info@phoenixcon.com Jan 8, 2024, 10:37 AM Page 18 (18)