5603157

https://www.phoenixcontact.com/us/products/5603157 Relay Module - PLC-RSC-120UC/21 C1D2 - 5603157 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) PLC relay, consisting of base terminal block PLC-BSC.../21 with screw connection and pluggable miniature relay with power contact, for assembly on DIN rail NS 35/7.5, 1 PDT, input voltage 120 V AC / 110 V DC. These relays are UL/cUL listed for use in Class I, Zone 2 AEx/Ex and Class I, Division 2 (CID2), hazardous locations.   Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 36.29 GRM Custom tariff number 85364190 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 6.2 mm Height 80 mm Depth 94 mm Ambient conditions Ambient temperature (operation) -25 °C ... 55 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Coil side Nominal input voltage UN 120 V AC 110 V DC Typical input current at UN 3.5 mA (at UN = 120 V AC) 3 mA (at UN = 110 V DC) Typical response time 6 ms 06/12/2014   Page 1 / 4 https://www.phoenixcontact.com/us/products/5603157 Relay Module - PLC-RSC-120UC/21 C1D2 - 5603157 Technical data Coil side Typical release time 15 ms Operating voltage display Yellow LED Protective circuit Bridge rectifier Contact side Contact type 1 PDT Contact material AgSnO Maximum switching voltage 250 V AC/DC (The separating plate PLC-ATP should be installed for voltages larger than 250 V (L1, L2, L3) between identical terminal blocks in adjacent modules. Potential bridging is then carried out with FBST 8-PLC... or ...FBST 500...) Minimum switching voltage 12 V AC/DC Maximum inrush current on request Min. switching current 10 mA Limiting continuous current 6A Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 20 W (at 48 V DC) 18 W (at 60 V DC) 23 W (at 110 V DC) 40 W (at 220 V DC) 1500 VA (for 250 V AC) General Test voltage relay winding/relay contact 4 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Mechanical service life 2 x 10 cycles Inflammability class according to UL 94 V0 Pollution degree 3 Surge voltage category III Mounting position any Assembly instructions In rows with zero spacing 7 Connection data Connection method Screw connection Stripping length 8 mm Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG/kcmil max 14 06/12/2014   Page 2 / 4 https://www.phoenixcontact.com/us/products/5603157 Relay Module - PLC-RSC-120UC/21 C1D2 - 5603157 Technical data Connection data Conductor cross section AWG/kcmil min. 26 Screw thread M3 Classifications eCl@ss eCl@ss 4.0 27371102 eCl@ss 4.1 27371102 eCl@ss 5.0 27371603 eCl@ss 5.1 27371603 eCl@ss 6.0 27371603 eCl@ss 7.0 27371603 eCl@ss 8.0 27371603 ETIM ETIM 3.0 EC001456 ETIM 4.0 EC000196 ETIM 5.0 EC000196 UNSPSC UNSPSC 6.01 30211917 UNSPSC 7.0901 39121516 UNSPSC 11 39121516 UNSPSC 12.01 39121516 UNSPSC 13.2 39121516 Drawings Circuit diagram A2 11 A1 14 12 06/12/2014   Page 3 / 4 https://www.phoenixcontact.com/us/products/5603157 Relay Module - PLC-RSC-120UC/21 C1D2 - 5603157 Diagram Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 06/12/2014   Page 4 / 4