CUC-IND-C1ZNI-S/R4IP8

https://www.phoenixcontact.com/au/products/1421126 RJ45 connector - CUC-IND-C1ZNI-S/R4IP8 - 1421126 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) RJ45 connector, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT5 (IEC 11801:2002), material: Zinc die-cast, connection method: IDC fast connection, connection cross section: AWG 23- 22, cable outlet: straight Why buy this product  assembly without special tools  One-Piece Design  AWG 23-22  360° shielding  High shock and vibration resistance Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626254654 Weight per Piece (excluding packing) 28.900 g Country of origin Germany Sales Key ABNAAA Technical data Mechanical characteristics Number of positions 8 Connection profile RJ45 Insertion/withdrawal cycles ≥ 750 Connection method IDC fast connection Conductor cross section 0.23 mm² ... 0.32 mm² (solid) 0.23 mm² ... 0.36 mm² (stranded) Connection cross section AWG 23 ... 22 (solid) 23 ... 22 (stranded) Max. cable diameter 5 mm ... 9 mm External cable diameter 5 mm ... 9 mm 02/02/2018   Page 1 / 6 https://www.phoenixcontact.com/au/products/1421126 RJ45 connector - CUC-IND-C1ZNI-S/R4IP8 - 1421126 Technical data Mechanical characteristics Cable outlet straight Wire diameter including insulation ≤ 1.6 mm Degree of protection IP20 Type RJ45, IP20 No. of cable outlets 1 Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C Material data Flammability rating according to UL 94 V0 Housing material Zinc die-cast Contact carrier material PC Contact material Copper alloy Contact surface material Gold over nickel Electrical characteristics Number of positions 8 Transmission speed 1 Gbps Transmission characteristics (category) CAT5 (IEC 11801:2002) GRP transmission properties CAT5 (IEC 11801:2002) Transmission speed 1 Gbps Frequency range to 100 MHz Rated current 1.75 A Overvoltage category I Contact resistance 0.001 Ω (Wire – IDC) 0.005 Ω (Litz wires – IDC) Rated voltage (III/3) 50 V Standards and Regulations Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 02/02/2018   Page 2 / 6 https://www.phoenixcontact.com/au/products/1421126 RJ45 connector - CUC-IND-C1ZNI-S/R4IP8 - 1421126 Dimensional drawing 13,7 14,4 53 RJ45 connector, IP20 Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 eCl@ss 6.0 27261204 eCl@ss 7.0 27440205 eCl@ss 8.0 27440101 eCl@ss 9.0 27440101 ETIM ETIM 5.0 EC002636 ETIM 6.0 EC002636 UNSPSC UNSPSC 13.2 39121409 Approvals Approvals Approvals cULus Recognized Ex Approvals Approval details 02/02/2018   Page 3 / 6 https://www.phoenixcontact.com/au/products/1421126 RJ45 connector - CUC-IND-C1ZNI-S/R4IP8 - 1421126 Approvals cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E335024-20170228     Nominal current IN 0.175 A Nominal voltage UN 56.5 V Accessories Accessories Data cable by the meter Network cable - VS-OE-OE-93B-100,0 - 1416389 Network cable, PROFINET CAT5 (100 Mbps), 4-position, PVC, green RAL 6018, shielded, free cable end, on free cable end, cable length: 100 m     Network cable - VS-OE-OE-93B/... - 1417362 Network cable, PROFINET CAT5 (100 Mbps), 4-position, PVC, green RAL 6018, shielded, free cable end, on free cable end, cable length: Free entry (0.5 ... 400 m)     Electronics pliers Diagonal cutter - MICROFOX-SP-1 - 1212487 Electronic diagonal cutter, tapered head, without chamfer, with opening spring, non-reflective phosphate-treated surface, punched version     Female insert RJ45 socket insert - CUC-F-J1ZNI-S/R4IDC8 - 1418984 RJ45 socket insert, type: RJ45, degree of protection: IP20, number of positions: 8, 10 Gbps, CAT6A, material: Zinc die-cast, connection method: IDC connection, connection cross section: AWG 26- 22     02/02/2018   Page 4 / 6 https://www.phoenixcontact.com/au/products/1421126 RJ45 connector - CUC-IND-C1ZNI-S/R4IP8 - 1421126 Accessories RJ45 coupling - CUC-F-D1ZNI-S/R4GC8 - 1419022 RJ45 coupling, type: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT6, material: Zinc die-cast, connection method: Female     RJ45 socket insert - CUC-K-J1ZNI-S/R4IDC8 - 1419021 RJ45 socket insert, type: RJ45, degree of protection: IP20, number of positions: 8, 10 Gbps, CAT6A, material: Zinc die-cast, connection method: IDC connection, connection cross section: AWG 26- 22, Use only with IP20 panel mounting frame or integrated directly into the housing panel     Patch panel DIN rail adapter - VS-PP-F-RJ45-CAT6 - 1658118 DIN rail adapter, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT6, material: PC-GF, connection method: IDC fast connection, connection cross section: AWG 24- 22, color: gray     DIN rail adapter - CUC-PP-D1PGY/R4GC8 - 1418094 DIN rail adapter, type: RJ45, degree of protection: IP20, number of positions: 8, 1 Gbps, CAT6, material: PC-GF, connection method: Coupling, color: gray     Terminal marking Marker for terminal blocks - TMT 5 R - 0816430 Marker for terminal blocks, Roll, white, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 6.4 x 5.15 mm     02/02/2018   Page 5 / 6 https://www.phoenixcontact.com/au/products/1421126 RJ45 connector - CUC-IND-C1ZNI-S/R4IP8 - 1421126 Accessories Marker for terminal blocks - TMT 5 R RD - 0816427 Marker for terminal blocks, Roll, red, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 6.4 x 5.15 mm     Marker for terminal blocks - TMT 5 R GN - 0816401 Marker for terminal blocks, Roll, green, unlabeled, can be labeled with: THERMOMARK ROLL, THERMOMARK ROLL X1, THERMOMARK ROLLMASTER 300/600, THERMOMARK X1.2, THERMOMARK S1.1, perforated, mounting type: snap into universal marker groove, snap into flat marker groove, for terminal block width: 5.2 mm, lettering field size: 6.4 x 5.15 mm     Stripping tool - VS-CABLE-STRIP-VARIO - 1657407 Stripping tool, for the multi-level stripping of shielded cables     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 02/02/2018   Page 6 / 6