CUTFOX 10

https://www.phoenixcontact.com/gb/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Automatic cutting device for cables, litz wires, and shrink sleeves, for 100 - 240 V mains voltage Your advantages  The desired length and number is entered via the user-friendly display  The drive and guide rolls automatically adjust to each inserted diameter  The cutting machine cuts conductors, cables, and similar profiles  No adjustments are required thanks to the automatic zero cut, which is performed when the start button is pressed  To insert the conductors simply open the front cover Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918178871 Weight per Piece (excluding packing) 12,534.000 g Custom tariff number 84798100 Country of origin Germany Technical data Dimensions Length (b) 301 mm Width (a) 194 mm Height (c) 228 mm General Note Cutting efficiency Power consumption 150 VA Maximum throughput 8 Cross section setting automatic 02/27/2020   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Technical data General Section length 2 mm ... 999999 mm Maximum number of cuts 9999 Feed rate 0.5 m/s Host system interface RS-232 Dialog language German / English / French / Italian Weight 11 kg Min. cross section 0.08 mm² Max. cross section 10 mm² Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Classifications eCl@ss eCl@ss 10.0.1 17130103 eCl@ss 4.0 21040300 eCl@ss 4.1 21040300 eCl@ss 5.0 21040300 eCl@ss 5.1 17130100 eCl@ss 6.0 17130100 eCl@ss 7.0 17130101 eCl@ss 8.0 17130101 eCl@ss 9.0 17130103 ETIM ETIM 2.0 EC000142 ETIM 3.0 EC000142 ETIM 4.0 EC000142 ETIM 5.0 EC000142 ETIM 6.0 EC000142 ETIM 7.0 EC000142 UNSPSC UNSPSC 6.01 23171604 UNSPSC 7.0901 23171604 UNSPSC 11 23171604 UNSPSC 12.01 23171604 UNSPSC 13.2 27111518 02/27/2020   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Classifications UNSPSC UNSPSC 19.0 27111518 Approvals Approvals Approvals EAC Ex Approvals Approval details EAC      RU xDE.xx08.B.02974 Accessories Accessories Cutting machine Accessories - CUTFOX 10 C-UN - 1208393 Cable roller for CUTFOX 10     Replacement part - CUTFOX 10 R-C - 1208403 Replacement rotary table for cable roller     02/27/2020   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Accessories Replacement part - CUTFOX 10 BAR - 1208416 Replacement holding arm for cable roller     Fuse Cable-cutting tool - CF-10 FUSE 120V SET - 1207323 Accessories for crimping machine     Cable-cutting tool - CF-10 FUSE 250V SET - 1207310 Accessories for crimping machine     Knife Spare knife - CF-10 CUTTER KNIFE SET - 1207284 Replacement knife, for the CUTFOX 10 cutting machine     Mounting material Cable-cutting tool - CF-10 WHEEL SET - 1207271 2 replacement rolls for CUTFOX 10     02/27/2020   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1206829 Cable-cutting tool - CUTFOX 10 - 1206829 Accessories Cable-cutting tool - CF-10 ABZH - 1207297 Accessories for crimping machine     Cable-cutting tool - CF-10 WHEEL SET PU - 1200098 2 replacement rolls for CUTFOX 10, with PU tread, for sensitive cables/conductors and their insulation (for hard insulation to some extent)     Cable-cutting tool - CF-10 WHEEL SET STEEL - 1200099 2 replacement rolls for CUTFOX 10 with hardened, finely knurled steel tread, for very hard insulation and materials.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/27/2020   Page 5 / 5