EC-E1 6A

https://www.phoenixcontact.com/us/products/0903028 Electronic device circuit breaker - EC-E1 6A - 0903028 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Electronic circuit breaker, signal contact: 1 N/O contact, nominal current: 6 A Product Features ■ ■ ■ A combination of active electronic current limitation in the event of short circuit and overload shutdown ensures that the circuit breaker can respond to overloads faster than the switched-mode power supply unit Selective protection of all 24 V DC load circuits at switched-mode power supply units The residual current is always limited to 1.3 - 1.8 times the nominal current Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 70.68 g Custom tariff number 85362010 Country of origin Germany Technical data General Installation instructions When mounted in rows without convection cooling, the nominal device current should only be led to a maximum of 80% due to the thermal effect during continuous operation (100% operating factor). Special precautionary measures must be taken in systems or machines, to prevent components from restarting (e.g., use of a safety PLC). Parallel connection of multiple circuit breakers is not permitted. Mounting type DIN rail: 35 mm Color black Flammability rating according to UL 94 V0 Electrical data Fuse Electronic Fuse type Automatic device 05/15/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/0903028 Electronic device circuit breaker - EC-E1 6A - 0903028 Technical data Electrical data Rated surge voltage 0.5 kV Operating voltage 24 V DC 18 V DC ... 32 V DC Nominal current IN 6A Required backup fuse not required, integrated failsafe element Dielectric strength max. 32 V DC (Load circuit) Degree of pollution 2 Switching capacity ICN Active current limitation Closed-circuit current range I0 typ. 25 mA ±5 mA (When switched on) Dimensions Height 83 mm Width 12.5 mm Depth 80 mm Height NS 35/7,5 83 mm Height NS 35/15 90.5 mm Ambient conditions Degree of protection IP20 (Housing) Ambient temperature (operation) 0 °C ... 50 °C (non-condensing) Connection data Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 16 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 6 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 10 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 10 mm² 2 conductors with same cross section, solid min. 0.5 mm² 2 conductors with same cross section, solid max. 4 mm² 2 conductors with same cross section, stranded min. 0.5 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.5 mm² 05/15/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/0903028 Electronic device circuit breaker - EC-E1 6A - 0903028 Technical data Connection data 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 6 mm² sleeve, max. Connection method Screw connection Stripping length 10 mm Screw thread M4 Tightening torque max 1.2 Nm Standards and Regulations Standards/specifications UL 508 CSA 22.2 No. 14 UL 2367 CSA 22.2 No. 142 CSA 22.2 No. 213 UL 1604 Classifications eCl@ss eCl@ss 4.0 27141116 eCl@ss 4.1 27141116 eCl@ss 5.0 27141116 eCl@ss 5.1 27141116 eCl@ss 6.0 27141116 eCl@ss 7.0 27141116 eCl@ss 8.0 27141116 eCl@ss 9.0 27141116 ETIM ETIM 2.0 EC000899 ETIM 3.0 EC000899 ETIM 4.0 EC000899 ETIM 5.0 EC000899 UNSPSC UNSPSC 6.01 30211812 05/15/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/0903028 Electronic device circuit breaker - EC-E1 6A - 0903028 Classifications UNSPSC UNSPSC 7.0901 39121411 UNSPSC 11 39121411 UNSPSC 12.01 39121411 UNSPSC 13.2 39121411 Approvals Approvals Approvals UL Recognized / EAC / EAC / UL Listed / cUL Listed / GL / cULus Listed Ex Approvals UL Recognized / CSA Approvals submitted Approval details UL Recognized  EAC  EAC  UL Listed  cUL Listed  GL  05/15/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/0903028 Electronic device circuit breaker - EC-E1 6A - 0903028 Approvals cULus Listed  Drawings Circuit diagram EC-E 1 ... 3 1 LOAD+ Line+ 0V 14 13 2 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/15/2016   Page 5 / 5