EO-CF/UT/LED

https://www.phoenixcontact.com/in/products/0804026 Socket - EO-CF/UT/LED - 0804026 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Socket, Pin connector pattern type CF, Screw connection, Light indicator, gray, for mounting on a DIN rail in the service interface or direct mounting, 250 V AC, 16 A, -20 °C, 60 °C, VDE 0620-1 Key Commercial Data Packing unit 5 pc Minimum order quantity 5 pc GTIN GTIN 4055626225685 Weight per Piece (excluding packing) 75.300 g Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Width 45 mm Height 75 mm Depth 60 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C General Nominal voltage UN 250 V AC (50 Hz) Nominal current IN 16 A Status display Yes Contact material CuZn37 Color gray Insulating material PA Flammability rating according to UL 94 V0 01/01/2019   Page 1 / 4 https://www.phoenixcontact.com/in/products/0804026 Socket - EO-CF/UT/LED - 0804026 Technical data General Standards/regulations VDE 0620-1 Country ID Germany Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Connection method Screw connection Standards and Regulations Standards/regulations VDE 0620-1 Flammability rating according to UL 94 V0 Fire protection for rail vehicles (DIN EN 45545-2) R22 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R23 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R24 HL 1 - HL 3 Fire protection for rail vehicles (DIN EN 45545-2) R26 HL 1 - HL 3 Environmental Product Compliance REACh SVHC Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram L1 PE N Classifications eCl@ss eCl@ss 5.1 27142300 eCl@ss 6.0 27142300 eCl@ss 7.0 27142305 eCl@ss 8.0 27142305 eCl@ss 9.0 27142305 01/01/2019   Page 2 / 4 https://www.phoenixcontact.com/in/products/0804026 Socket - EO-CF/UT/LED - 0804026 Classifications ETIM ETIM 5.0 EC001663 ETIM 6.0 EC001663 Approvals Approvals Approvals VDE Zeichengenehmigung Ex Approvals Approval details VDE Zeichengenehmigung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx     Nominal voltage UN 250 V Nominal current IN 16 A  40047711 Accessories Accessories Adapter plate Adapter plate - EO-SI-FRAME - 0804522 Adapter plate for installing the control cabinet sockets (type EO-...) in the mounting frames (type VS-SI-EB-EMV.../ SI-M1A.../ SI-M1B...). Includes fastening hardware for the control cabinet socket     Terminal marking Marker for terminal blocks - UC-TMF 8 - 0818137 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm     01/01/2019   Page 3 / 4 https://www.phoenixcontact.com/in/products/0804026 Socket - EO-CF/UT/LED - 0804026 Accessories Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm     Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm     Zack Marker strip, flat - ZBF 16:UNPRINTED - 0827464 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 16.25 x 10.5 mm     Phoenix Contact 2019 © - all rights reserved http://www.phoenixcontact.com 01/01/2019   Page 4 / 4