EO-G/UT/SH/LED

https://www.phoenixcontact.com/gb/products/0804053 Socket - EO-G/UT/SH/LED - 0804053 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Socket, Pin connector pattern type G, Screw connection, for Great Britain and other countries, with extended touch proofness/shutter, LED display, gray, for mounting on a DIN rail in the service interface or direct mounting, 250 V AC, 13 A, -20 °C, 60 °C, BS 1363-1/-2 Key Commercial Data Packing unit 5 pc Minimum order quantity 5 pc GTIN GTIN 4055626225920 Weight per Piece (excluding packing) 86.000 g Custom tariff number 85366990 Country of origin Poland Technical data Dimensions Width 45 mm Height 75 mm Depth 57.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C General Nominal voltage UN 250 V AC (50 Hz) Nominal current IN 13 A Status display Yes Contact material CuZn37 Color gray Insulating material PA Flammability rating according to UL 94 V0 02/27/2020   Page 1 / 4 https://www.phoenixcontact.com/gb/products/0804053 Socket - EO-G/UT/SH/LED - 0804053 Technical data General Standards/regulations BS 1363-1/-2 Country ID Great Britain Connection data Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Connection method Screw connection Standards and Regulations Standards/regulations BS 1363-1/-2 Flammability rating according to UL 94 V0 Environmental Product Compliance Lead 7439-92-1 China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Circuit diagram Classifications eCl@ss eCl@ss 4.0 27142300 eCl@ss 4.1 27142300 eCl@ss 5.0 27142300 eCl@ss 5.1 27142300 02/27/2020   Page 2 / 4 https://www.phoenixcontact.com/gb/products/0804053 Socket - EO-G/UT/SH/LED - 0804053 Classifications eCl@ss eCl@ss 6.0 27142300 eCl@ss 7.0 27142305 eCl@ss 8.0 27142305 eCl@ss 9.0 27142305 ETIM ETIM 5.0 EC001663 ETIM 6.0 EC001663 ETIM 7.0 EC001663 Approvals Approvals Approvals KEMA-KEUR / EAC Ex Approvals Approval details KEMA-KEUR    http://www.dekra-certification.com     Nominal voltage UN 250 V Nominal current IN 13 A EAC      2198555.01  RU CDE.BL08.B.00511 Accessories Accessories Adapter plate 02/27/2020   Page 3 / 4 https://www.phoenixcontact.com/gb/products/0804053 Socket - EO-G/UT/SH/LED - 0804053 Accessories Adapter plate - EO-SI-FRAME - 0804522 Adapter plate for installing the control cabinet sockets (type EO-...) in the mounting frames (type VS-SI-EB-EMV.../ SI-M1A.../ SI-M1B...). Includes fastening hardware for the control cabinet socket     Terminal marking Marker for terminal blocks - UC-TMF 8 - 0818137 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8.2 mm, lettering field size: 7.6 x 5.1 mm, Number of individual labels: 56     Marker for terminal blocks - UC-TMF 16 - 0819262 Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 5.1 mm, Number of individual labels: 32     Zack Marker strip, flat - ZBF 8:UNBEDRUCKT - 0808781 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 8 mm, lettering field size: 5.15 x 8.15 mm, Number of individual labels: 10     Zack Marker strip, flat - ZBF 16:UNPRINTED - 0827464 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into flat marker groove, for terminal block width: 16 mm, lettering field size: 16.25 x 10.5 mm, Number of individual labels: 50     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/27/2020   Page 4 / 4