ESSENTIAL-PS/1AC/24DC/120W/EE

https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Primary-switched ESSENTIAL POWER power supply for DIN rail mounting, input: 1-phase, output: 24 V DC / 120 W Your advantages  Worldwide use thanks to the wide range input and international approval package  Fast installation, thanks to easy DIN rail mounting  Greater availability, thanks to fanless convention cooling Key Commercial Data Packing unit 1 pc GTIN GTIN 4055626464411 Weight per Piece (excluding packing) 674.800 g Custom tariff number 85044030 Country of origin Thailand Technical data Dimensions Width 40 mm Height 123.6 mm Depth 117.6 mm Installation distances left/right 10 mm Installation distances top/bottom 50 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -20 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) 02/27/2020   Page 1 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Technical data Ambient conditions Degree of pollution 2 Installation height ≤ 5000 m (> 2000 m, Derating: 10 %/1000 m) Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 85 V AC ... 264 V AC (< 100 V AC derating 1%/V AC) AC frequency range 47 Hz ... 63 Hz Discharge current to PE < 0.25 mA (264 V AC) Current consumption 2.2 A (115 V AC) 1.2 A (230 V AC) Nominal power consumption 249.56 VA Inrush current typ. 20 A (115 V AC) typ. 40 A (230 V AC) Mains buffering time typ. 20 ms (115 V AC) typ. 90 ms (230 V AC) Input fuse 4 A (slow-blow, internal) Type of protection Transient surge protection Protective circuit/component Varistor Output data Nominal output voltage 24 V DC ±2 % Setting range of the output voltage (USet) 22 V DC ... 28 V DC (max. power ≤ 120 W) Nominal output current (IN) 5A Derating -20 °C ... -10 °C (2 % / °C) > 40 °C (1.67 % / °C, 115 V AC) > 50 °C (2.5 % / °C, 230 V AC) Max. capacitive load 8000 μF Active current limitation 105% - 150% of the max. output power (in the event of short circuit) Residual ripple < 120 mVPP (-10 °C ... +70 °C) < 240 mVPP (-20 °C ... -10 °C) Output power 120 W Typical response time 200 ms Maximum power dissipation in no-load condition 0.65 W (115 V AC / 230 V AC) Power loss nominal load max. 13.3 W (115 V AC / 230 V AC) General Net weight 0.54 kg Operating voltage display Green LED Efficiency 85 % (115 V AC) 88 % (230 V AC) Insulation voltage input/output 3 kV AC Insulation voltage input / PE 2 kV AC 02/27/2020   Page 2 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Technical data General Insulation voltage output / PE 0.5 kV AC Protection class I (with PE connection) Degree of protection IP20 MTBF (Telcordia SR-332) > 700000 h Assembly instructions alignable: horizontally 10 mm, vertically 50 mm Connection data, input Connection method Screw connection Conductor cross section AWG min. 18 Conductor cross section AWG max. 8 Stripping length 7 mm Connection data, output Connection method Screw connection Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 Stripping length 7 mm Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Noise emission EN 55011 (EN 55022) Class B Noise immunity EN 61000-6-2 EN 61000-6-1 Standards/regulations EN 61000-6-3 Low Voltage Directive Conformance with Low Voltage Directive 2014/35/EC Standard - Electrical safety EN 60950-1 Standard – Safety extra-low voltage EN 60950-1 (SELV) UL approvals UL/C-UL listed UL 508 Shock IEC 60068-2-27, 27, half sinusoidal wave: 50g for 11 ms; 3x per direction, 9x overall Vibration (operation) IEC 60068-2-6, sinusoidal waves: 10 Hz ... 500 Hz, 19,6 m/s² (2g peak), 10 min. per cycle, 60 min. in the X direction Approval - requirement of the semiconductor industry with regard to mains voltage dips SEMI F47 - 0706 (200 V AC) Drawings 02/27/2020   Page 3 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Dimensional drawing 02/27/2020   Page 4 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Schematic diagram 02/27/2020   Page 5 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Dimensional drawing Block diagram 02/27/2020   Page 6 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Diagram Diagram Classifications eCl@ss eCl@ss 5.1 27049002 eCl@ss 9.0 27040701 Approvals Approvals 02/27/2020   Page 7 / 8 https://www.phoenixcontact.com/gb/products/2910586 Power supply unit - ESSENTIAL-PS/1AC/24DC/120W/EE - 2910586 Approvals Approvals EAC Ex Approvals Approval details EAC      EAC*DE*08*02578 Accessories Accessories Device protection Type 3 surge protection device - PLT-EE-T3-230-FM - 2910544 Pluggable device protection, according to type 3/Class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.     Type 3 surge protection device - PLT-EE-T3-24-FM - 2910540 Pluggable device protection, according to type 3/Class III, for 1-phase power supply networks with separate N and PE (3-conductor system: L1, N, PE) with remote indication contact.     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/27/2020   Page 8 / 8