EV-T2G3C-1AC32A-4,0M6,0ESBK01

https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) AC charging cable with Vehicle Connector, open cable end, with protective cap, Type 2, IEC 62196-2, 32 A / 250 V (AC), design line C-Line, cable: 4 m, black, straight, mating face: black, handle area: gray Product Description AC charging cable with Vehicle Connector and open cable end for charging electric vehicles (EV) with alternating current (AC) via type 2 Vehicle Inlets, for installation at charging stations for E-Mobility (EVSE) Why buy this product  Consistent design of all Phoenix Contact Vehicle Connectors and Infrastructure Plugs  Silver-plated surface of the power and signal contacts  Certified in accordance with IATF 16949:2016 and ISO 9001:2015  Material data available in the IMDS (International Material Data System of the automotive industry)  Convenient handling, thanks to the ergonomic handle and additional, rubber grip components  Tested in accordance with selected tests of automotive standards LV124, LV214, LV215-2    Consistent longitudinal water tightness prevents water ingress in the cable Key Commercial Data Packing unit 1 STK GTIN GTIN 4055626177847 Weight per Piece (excluding packing) 1,740.000 g Custom tariff number 85444290 Country of origin Germany 08/09/2018   Page 1 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Technical data Product definition Product type AC charging cable with Vehicle Connector, open cable end, with protective cap Type C-Line black / gray Standards/regulations IEC 62196-2 Charging standard Type 2 Charging mode Mode 3, Case C Dimensions Vehicle connector width 70.00 mm Vehicle connector height 137.00 mm Vehicle connector depth 215.90 mm Conductor length 4m Stripping length 60 mm ±15 mm Ambient conditions Ambient temperature (operation) -30 °C ... 50 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Max. altitude 5000 m (above sea level) Degree of protection IP44 (plugged in) IP54 (Protective cap) Electrical properties Maximum charging power 8 kW Number of phases 1 Number of power contacts 3 (L1, N, PE) Rated current of power contacts 32 A Rated voltage for power contacts 250 V AC Number of signal contacts 2 (CP, PP) Rated current for signal contacts 2A Rated voltage for signal contacts 30 V AC Type of signal transmission Pulse width modulation Resistor coding 220 Ω (between PE and PP) Mechanical properties Insertion/withdrawal cycles > 10000 Insertion force < 100 N Withdrawal force < 100 N Design Design line C-Line 08/09/2018   Page 2 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Technical data Design Housing color black Mating face color black Color handle area gray Color protective cap black Customer variations On request Material Housing material Plastic Material handle area Soft plastic Material protective cap Soft plastic Material mating face Plastic Flammability rating V0 Material surface of contacts Ag Cable Cable structure 3 x 6.0 mm² + 1 x 0.5 mm² Wiring standards/regulations prEN 50620 / DIN EN 50620 Wiring class Class 5 Wiring certifications VDE External cable diameter 12.8 mm ±0.4 mm Type of conductor straight Outer sheath, material TPE-U External sheath, color black Minimum bending radius 192 mm (15 x diameter) Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 10; For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 08/09/2018   Page 3 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Dimensional drawing 215,9 34,5 Schematic diagram PE 70 63 63 N 137 PP 56 CP L1 55,6 L3 L2 46,4 Pin assignment of the Vehicle Connector Ensure that the vehicle connector is placed in an appropriate resting position that ensures a minimum protection rating of IP24 in accordance with IEC 61851-1 for the entire time between charging. Use the dimensions of the vehicle connector to create this type of resting position. Detailed specifications can also be found in the download area. 08/09/2018   Page 4 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Schematic diagram AC [I] AC [II] AC [III] AC [IV] [V] Operating instructions AC 08/09/2018   Page 5 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Schematic diagram AC Terminology definition Classifications eCl@ss eCl@ss 4.0 272607xx eCl@ss 4.1 27260701 eCl@ss 5.0 27260701 eCl@ss 5.1 27143400 eCl@ss 6.0 27143400 eCl@ss 7.0 27449001 eCl@ss 8.0 27449001 eCl@ss 9.0 27144705 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002839 ETIM 6.0 EC002897 UNSPSC UNSPSC 6.01 30211923 UNSPSC 7.0901 39121522 UNSPSC 11 39121522 UNSPSC 12.01 39121522 UNSPSC 13.2 39121522 Accessories Accessories 08/09/2018   Page 6 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Accessories AC charging controller AC charging controller - EV-CC-AC1-M3-CC-SER-HS - 1622459 The EV-CC-AC1-M3-CBC-SER-HS charging controller with housing for DIN rail mounting is used for charging electric vehicles at 3-phase AC networks according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated.     AC charging controller - EV-CC-AC1-M3-CC-SER-PCB - 1622460 The EV-CC-AC1-M3-CC-SER-PCB charging controller as a PCB for charging electric vehicles on a 3-phase AC power grid according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated.     AC charging controller - EV-CC-AC1-M3-CC-SER-PCB-XC-25X - 1627742 The EV-CC-AC1-M3-CC-SER-PCB charging controller as a PCB for charging electric vehicles on a 3-phase AC power grid according to IEC 61851-1, Mode 3. Optimized for charging stations with permanently mounted Vehicle Connector. All charging functions and comprehensive configuration settings are already integrated.     AC charging controller - EV-CC-AC1-M3-CC-SER-PCB-MSTB - 1627367 The EV-CC-AC1-M3-CC-SER-PCB-MSTB charging controller as a PCB for charging electric vehicles according to IEC 61851-1, Mode 3, optimized for charging stations with permanently mounted Vehicle Connector. Connection via PCB connector on header.     AC charging controller - EM-CP-PP-ETH - 2902802 EV charge control is used to charge electrical vehicles on the 3-phase AC mains power supply according to IEC 61851-1 Mode 3. All necessary control functions are integrated. Additional functions are available for various charging applications.     08/09/2018   Page 7 / 8 https://www.phoenixcontact.com/us/products/1623503 AC charging cable - EV-T2G3C-1AC32A-4,0M6,0ESBK01 - 1623503 Accessories Park position Park position - EV-T2AC-PARK - 1624148 Retainer for Vehicle Connector as parking position at charging stations (EVSE), Type 2, IEC 62196-2, Front mounting     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 08/09/2018   Page 8 / 8