F-MS 12 ST

https://www.phoenixcontact.com/us/products/2817990 Type 2 surge protection plug - F-MS 12 ST - 2817990 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection plug type 2, with N-PE total current spark gap for base element. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 37.7 g Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 52.4 mm Width 17.5 mm Depth 55.3 mm Horizontal pitch 1 Div. Ambient conditions Degree of protection IP20 Ambient temperature (operation) -40 °C ... 80 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % Shock (operation) 25g (half sinus / 11 ms / 3x ±X, ±Y, ±Z) Vibration (operation) 5g (10 ... 500 Hz / 2.5 h / X, Y, Z) General 05/16/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2817990 Type 2 surge protection plug - F-MS 12 ST - 2817990 Technical data General Standards/specifications IEC 61643-11 2011 EN 61643-11 2012 IEC test classification II T2 EN type T2 IEC power supply system TN TT SPD design Voltage-switching type Mode of protection N-PE Mounting type On base element Color jet black RAL 9005 Housing material PA 6.6 Degree of pollution 2 Flammability rating according to UL 94 V-0 Type DIN rail module, two-section, divisible Number of positions 1 Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10 Surge protection fault message optical Protective circuit Nominal voltage UN 240/415 V AC (TN - only N-PE) 240/415 V AC (TT - only N-PE) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous voltage UC 260 V AC Residual current IPE ≤ 5 µA Standby power consumption PC ≤ 1.5 mVA Nominal discharge current In (8/20) µs 20 kA Maximum discharge current Imax (8/20) µs 40 kA Follow current interrupt rating Ifi 100 A (260 V) Voltage protection level Up ≤ 1.5 kV Residual voltage Ures ≤ 0.4 kV (at In) ≤ 0.25 kV (at 10 kA) ≤ 0.15 kV (at 5 kA) ≤ 0.1 kV (at 3 kA) Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 1.5 kV TOV behavior at UT 1200 V AC (200 ms / withstand mode) Response time tA ≤ 100 ns 05/16/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2817990 Type 2 surge protection plug - F-MS 12 ST - 2817990 Technical data Connection data Connection method VALVETRAB plug-in system UL specifications SPD Type 4CA Maximum continuous operating voltage MCOV (N-G) 260 V AC Mode of protection N-G Power distribution system 1 Nominal frequency 50/60 Hz Measured limiting voltage MLV (N-G) 1490 V Nominal discharge current In (N-G) 20 kA Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 eCl@ss 5.1 27130801 eCl@ss 6.0 27130805 eCl@ss 7.0 27130805 eCl@ss 8.0 27130805 eCl@ss 9.0 27130805 ETIM ETIM 2.0 EC000941 ETIM 3.0 EC000941 ETIM 4.0 EC000941 ETIM 5.0 EC000941 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals 05/16/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2817990 Type 2 surge protection plug - F-MS 12 ST - 2817990 Approvals Approvals ÖVE / IECEE CB Scheme / UL Recognized / KEMA-KEUR / cUL Recognized / GL / CCA / CSA / EAC / EAC / cULus Recognized Ex Approvals Approvals submitted Approval details ÖVE  IECEE CB Scheme  UL Recognized  KEMA-KEUR  cUL Recognized  GL  CCA  CSA  05/16/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2817990 Type 2 surge protection plug - F-MS 12 ST - 2817990 Approvals EAC  EAC  cULus Recognized  Drawings Dimensional drawing Circuit diagram 52,4 17,5 43,3 55,3 44,8 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/16/2016   Page 5 / 5