FLT-PLUS

https://www.phoenixcontact.com/in/products/2800116 Lightning arrester type 1 - FLT-PLUS - 2800116 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Type 1/Class I (lightning arrester) with arc chopping spark gap, quenching plates for high follow current quenching capacity, 1-channel. Housing width: 35 mm (2 Div.) Product Features ■ ■ High discharge capacity Single-channel Key Commercial Data Packing unit 1 pc GTIN Weight per Piece (excluding packing) 519.1 g Custom tariff number 85363030 Country of origin Germany Technical data Dimensions Height 150 mm Width 35.5 mm Depth 65.5 mm Horizontal pitch 2 Div. Ambient conditions Degree of protection IP20 (only when all terminal points are used) Ambient temperature (operation) -40 °C ... 85 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Altitude ≤ 2000 m (amsl (above mean sea level)) Permissible humidity (operation) 5 % ... 95 % General Standards/specifications IEC 61643-11 2011 05/09/2016   Page 1 / 4 https://www.phoenixcontact.com/in/products/2800116 Lightning arrester type 1 - FLT-PLUS - 2800116 Technical data General EN 61643-11 2012 IEC test classification I T1 EN type T1 IEC power supply system TT TN-C TN-S Number of ports One SPD design Voltage-switching type Mode of protection L-PEN Mounting type DIN rail: 35 mm Color black Housing material PA 6.6 Degree of pollution 2 Flammability rating according to UL 94 V-0 Type Rail-mountable module, one-piece Number of positions 1 Surge protection fault message None Protective circuit Nominal voltage UN 230/400 V AC (TN) 230/400 V AC (TT) Nominal frequency fN 50 Hz (60 Hz) Maximum continuous operating voltage UC (L-PEN) 440 V AC Rated load current IL 80 A Residual current IPE ≤ 0.1 mA Standby power consumption PC ≤ 44 mVA Nominal discharge current In (8/20) µs (L-PEN) 50 kA Impulse discharge current (10/350) µs (L-PEN), charge 25 As Impulse discharge current (10/350) µs (L-PEN), specific energy 625 kJ/Ω Impulse discharge current (10/350) µs (L-PEN), peak current value Iimp 50 kA Follow current interrupt rating Ifi (L-PEN) 25 kA Short-circuit current rating ISCCR 25 kA Voltage protection level Up (L-PEN) ≤ 5 kV Front of wave sparkover voltage at 6 kV (1.2/50) µs ≤ 5 kV TOV behavior at UT (L-PEN) 440 V AC (5 s / withstand mode) 440 V AC (120 min / withstand mode) Response time tA (L-PEN) ≤ 100 ns Max. backup fuse with branch wiring 500 A AC (gG) Max. backup fuse with V-type through wiring 80 A AC (gG) 05/09/2016   Page 2 / 4 https://www.phoenixcontact.com/in/products/2800116 Lightning arrester type 1 - FLT-PLUS - 2800116 Technical data Connection data Connection method Screw connection Conductor cross section flexible min. 16 mm² Conductor cross section flexible max. 35 mm² Conductor cross section solid min. 10 mm² Conductor cross section solid max. 50 mm² Conductor cross section AWG 6 ... 1 Screw thread M6 Tightening torque 8 Nm Stripping length 19 mm Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27140201 eCl@ss 5.0 27140201 eCl@ss 5.1 27140201 eCl@ss 6.0 27140201 eCl@ss 7.0 27140201 eCl@ss 8.0 27130802 eCl@ss 9.0 27130802 ETIM ETIM 2.0 EC000381 ETIM 3.0 EC000381 ETIM 4.0 EC000381 ETIM 5.0 EC000381 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals EAC 05/09/2016   Page 3 / 4 https://www.phoenixcontact.com/in/products/2800116 Lightning arrester type 1 - FLT-PLUS - 2800116 Approvals Ex Approvals Approvals submitted Approval details EAC  Drawings Dimensional drawing 58,1 65,6 150 Circuit diagram 35,5 L/N ( ) L/N ( ) Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/09/2016   Page 4 / 4