https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
High Current Connectors, nom. voltage: 1000 V, nominal current: 150 A, connection method: Bolt connection,
number of connections: 1, width: 21 mm, height: 63.5 mm, color: gray, mounting type: NS 35/7,5, NS 35/15
Your advantages
Comprehensive, supplementary accessories
For connecting up to four conductors
Key Commercial Data
Packing unit
25 pc
GTIN
GTIN
4046356184052
Weight per Piece (excluding packing)
50.080 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
1
Number of connections
1
Nominal cross section
50 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum power dissipation for nominal condition
4.73 W
02/27/2020 Page 1 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Technical data
General
Ambient temperature (operation)
-60 ... 85 ()
Ambient temperature (storage/transport)
-25 ... 55
Ambient temperature (assembly)
-5 ... 70
Ambient temperature (actuation)
-5 ... 70
Connection in acc. with standard
IEC 60947-7-1
Nominal current IN
150 A
Maximum load current
150 A (with 50 mm² conductor cross section)
Nominal voltage UN
1000 V
Open side panel
No
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
10 N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
50 mm²
Short-time current
6 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2018-05
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
0.964 (m/s ) /Hz
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
2 2
02/27/2020 Page 2 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Technical data
General
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Length
64 mm
Width
21 mm
Height
63.5 mm
Height NS 35/7,5
65.8 mm
Height NS 35/15
73.3 mm
Bolt length
31.5 mm
Connection data
Connection method
Bolt connection
Cable lug connection according to standard
DIN 46234:1980-03
Min. cross section for cable lug connection
2.5 mm²
Max. cross section for cable lug connection
50 mm²
Hole diameter, min.
8.4 mm
Cable lug width, max.
18 mm
Bolt length
31.5 mm
Bolt diameter
8 mm
Screw thread
M8
Tightening torque, min
6 Nm
Tightening torque max
12 Nm
Cable lug connection according to standard
DIN 46235:1983-07
Min. cross section for cable lug connection
16 mm²
Max. cross section for cable lug connection
35 mm²
Hole diameter, min.
8.4 mm
Cable lug width, max.
17 mm
02/27/2020 Page 3 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Technical data
Connection data
Bolt length
31.5 mm
Bolt diameter
8 mm
Screw thread
M8
Tightening torque, min
6 Nm
Tightening torque max
12 Nm
Cable lug connection according to standard
DIN 46237:1970-07
Min. cross section for cable lug connection
2.5 mm²
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
8.4 mm
Cable lug width, max.
14 mm
Bolt length
31.5 mm
Bolt diameter
8 mm
Screw thread
M8
Tightening torque, min
6 Nm
Tightening torque max
12 Nm
Stripping length
The stripping length depends on the specification provided by the cable
lug manufacturer.
Standards and Regulations
Connection in acc. with standard
CSA
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Classifications
eCl@ss
eCl@ss 4.0
27141100
eCl@ss 4.1
27141100
eCl@ss 5.0
27141100
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
02/27/2020 Page 4 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Classifications
ETIM
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
UNSPSC 18.0
39121410
UNSPSC 19.0
39121410
UNSPSC 20.0
39121410
UNSPSC 21.0
39121410
Approvals
Approvals
Approvals
EAC / UL Recognized / cUL Recognized / CSA / EAC / cULus Recognized
Ex Approvals
Approval details
RU CDE.A*30.B.01742
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
EAC
C
Nominal voltage UN
1000 V
02/27/2020 Page 5 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Approvals
C
Nominal current IN
150 A
CSA
http://www.csagroup.org/services-industries/product-listing/
C
Nominal voltage UN
1000 V
Nominal current IN
150 A
EAC
cULus Recognized
158887
RU CDE.BL08.B.00540
Accessories
Accessories
Bridge
Connection element - HV M8/1 M6/1-STL - 3071094
Connection element, number of positions: 2, color: silver
Connection element - HV M8/1-VS 2 - 3049369
Connection element, length: 41 mm, width: 20 mm, height: 4 mm, number of positions: 2, color: silver
Connection element - HV M8/1-VS 3 - 3049372
Connection element, length: 64 mm, width: 20 mm, height: 4 mm, number of positions: 3, color: silver
02/27/2020 Page 6 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Accessories
Cover profile
Cover profile - HV M8/1-AP - 3049398
Cover profile, for single-bolt terminal block M8, length: 75 mm, width: 21 mm, height: 6.5 mm, color: gray
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
02/27/2020 Page 7 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Accessories
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
End block
02/27/2020 Page 8 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
Labeled terminal marker
Warning label - WS-4K - 1004584
Adhesive warning plate, self-adhesive, black print: lightning flash with mixed verson - "Vorsicht Spannung - Attention
Danger" size of label: 13 x 23.5 mm
Zack marker strip - ZB 12 CUS - 0824942
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap
into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual
labels: 5
Zack marker strip - ZB 12,LGS:L1-N,PE - 0812146
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 12.2 mm, lettering field size: 10.5 x 12.15 mm, Number of individual labels: 5
Marker for terminal blocks - UC-TM 12 CUS - 0824613
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of
individual labels: 40
02/27/2020 Page 9 / 10
https://www.phoenixcontact.com/gb/products/3049301
High Current Connectors - HV M8/1 - 3049301
Accessories
Marker for terminal blocks - UCT-TM 12 CUS - 0829630
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting
type: snap into tall marker groove, for terminal block width: 12 mm, lettering field size: 10.8 x 9.6 mm, Number of
individual labels: 30
Partition plate
Separating plate - HV M12/2-TP - 3049709
Separating plate, length: 156 mm, width: 2 mm, color: gray
Terminal marking
Zack marker strip - ZB 12:UNPRINTED - 0812120
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type:
snap into tall marker groove, for terminal block width: 12.2 mm, lettering field size: 12 x 10.5 mm, Number of
individual labels: 5
Marker for terminal blocks - UC-TM 12 - 0819194
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 12 mm, lettering field size: 11.45 x 10.5 mm, Number of individual labels: 40
Marker for terminal blocks - UCT-TM 12 - 0829144
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 12 mm, lettering field
size: 10.8 x 9.6 mm, Number of individual labels: 30
Phoenix Contact 2020 © - all rights reserved
http://www.phoenixcontact.com
02/27/2020 Page 10 / 10
