https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Device connector, front mounting, angled rotatable, for standard and ONECLICK fast locking system, M17, No. of
pos.: 5+3+PE, type of contact: Socket, Crimp connection, flange dimensions: 26 mm x 26 mm, coding:N
Your advantages
Solutions with cross-manufacturer compatibility for standard and fast locking systems
Modern, consistent design for highly convenient operation
Crimping connection: vibration- and temperature-resistant assembly
All housing can be fitted with pin or socket contacts
Safe use in the field, thanks to high degree of protection
Key Commercial Data
Packing unit
1 pc
Custom tariff number
85366990
Country of origin
Germany
Technical data
Temperature range
Ambient temperature
-40 °C ... 105 °C (see derating curve)
Standards and Regulations
Safety note
WARNING: The connectors may not be plugged in or disconnected under
load. Ignoring the warning or improper use may damage persons and/or
property.
• WARNING: Commission properly functioning products only. The products
must be regularly inspected for damage. Decommission defective products
immediately. Replace damaged products. Repairs are not possible.
• WARNING: Only electrically qualified personnel may install and operate
the product. They must observe the following safety notes. The qualified
personnel must be familiar with the basics of electrical engineering. They
08/23/2021 Page 1 / 7
https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Technical data
Standards and Regulations
must be able to recognize and prevent danger. The relevant symbol on the
packaging indicates that only personnel familiar with electrical engineering
are allowed to install and operate the product.
• The products are suitable for applications in plant, controller, and
electrical device engineering.
• When operating the connectors in outdoor applications, they must be
separately protected against environmental influences.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data of the
standards listed (e.g. the ones listed in the product accessories online at
phoenixcontact.com/products).
• When using the product in direct connection with third-party
manufacturers, the user is responsible.
• For operating voltages > 50 V AC, conductive connector housings must
be grounded
• Ensure that the protective or functional ground has been properly
connected.
• VDE 0100/1.97 § 411.1.3.2 and DIN EN 60 204/11.98 § 14.1.3 are
applicable when combining several circuits in a cable and/or connector
• Only use tools recommended by Phoenix Contact
• The installation notes/Design In documents online on the download page
at phoenixcontact.com/products must be observed for this product.
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors
does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable without
twisting it.
• The connector warms up in normal operation. Depending on the ambient
conditions, the surface of the connector can continue to warm up. In
this case, the user is responsible for posting warnings (e.g. DIN EN ISO
13732-1:2008-12).
Data of the insulating body
Coding
N
Contact connection method
Crimp connection
Type of contacts
Socket
Application
Power
Number of positions
9
Contact diameter of power contacts
1 mm
Litz wire cross section of power contacts min.
0.06 mm²
Litz wire cross section of power contacts max.
1 mm²
Rated current for power contacts
14 A
Note
for max. connection cross section
08/23/2021 Page 2 / 7
https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Technical data
Data of the insulating body
Rated voltage
630 V
Rated surge voltage
6 kV
Overvoltage category
III
Degree of pollution
3
Contact diameter of signal contacts
0.6 mm
Litz wire cross section of signal contacts min.
0.06 mm²
Litz wire cross section of signal contacts max.
0.5 mm²
Nominal current per signal contact
3.6 A
Note
for max. connection cross section
Rated voltage of signal contact
60 V
Rated surge voltage
1.5 kV
Overvoltage category
III
Degree of pollution
3
Note
for max. connection cross section
Installation height
2000 m
Housing data
Housing material
GD-Zn
Flange dimensions
26 mm x 26 mm
Type of locking
for standard and ONECLICK fast locking system
Degree of protection (when plugged in)
IP67
IP68, 24 h / 2 m
Thread type
M17
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
08/23/2021 Page 3 / 7
https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Schematic diagram
Dimensional drawing
A-A
-0,2
P E
A
3
1
A
2
E
B
C
D
27
±0,5
Connector pin assignment
+0,1
Ø20,1
4xM3
area for
Rz16
Ø 0,1 A
Rz16
A
A
19,8
Installation dimensions
I [A]
Diagram
20
15
10
5
0
2
2
= 3x1,0 mm + 2x0,5 mm
0
10
20
30
40
50
60
70
80
90 100 110
[°C]
I = current strength, ϑ = ambient temperature, 3x 14 A + 2x 2 A constant
08/23/2021 Page 4 / 7
https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Dimensional drawing
138
°
192
°
4x
Ø3
,1
37,3
51,3
M17x1
25,4
19,8
1,2
36,9
25,6
Dimensional drawing
Classifications
eCl@ss
eCl@ss 10.0.1
27440109
eCl@ss 11.0
27440109
eCl@ss 9.0
27440103
ETIM
ETIM 6.0
EC002061
UNSPSC
UNSPSC 18.0
39121413
UNSPSC 19.0
39121413
UNSPSC 20.0
39121413
UNSPSC 21.0
39121413
Accessories
Accessories
Crimp contact
08/23/2021 Page 5 / 7
https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Accessories
Crimp contact - ST-06KS010 - 1607580
Crimp contact, turned, contact diameter: 0.6 mm, crimp range: 0.06 mm² ... 0.25 mm²
Crimp contact - ST-06KS020 - 1607581
Crimp contact, turned, contact diameter: 0.6 mm, crimp range: 0.14 mm² ... 0.34 mm²
Crimp contact - ST-06KS030 - 1607582
Crimp contact, turned, contact diameter: 0.6 mm, crimp range: 0.34 mm² ... 0.5 mm²
Crimp contact - ST-10KS010 - 1618239
Crimp contact, turned, Single contact, contact diameter: 1 mm, crimp range: 0.06 mm² ... 0.25 mm²
Crimp contact - ST-10KS035 - 1618464
Crimp contact, turned, contact diameter: 1 mm, crimp range: 0.25 mm² ... 1 mm²
Protective cover
08/23/2021 Page 6 / 7
https://www.phoenixcontact.com/us/products/1628502
Device connector, front mounting - M17-8ES1N8AA500S - 1628502
Accessories
Metal protective cap - ST-Z0014 - 1616069
Metal protection cap for connectors with M17 external thread
Metal protective cap - ST-Z0013 - 1616068
Metal protection cap with steel wire for connectors with M17 external thread
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
08/23/2021 Page 7 / 7
