MCR-FL-TS-LP-I-EX

https://www.phoenixcontact.com/gb/products/2864587 Temperature measuring transducer - MCR-FL-TS-LP-I-EX - 2864587 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Measurement and control temperature transducers, resistance thermometers, thermocouples, resistance-type sensors, and voltage sensors. Replacement part: 2908660 MACX MCR-EX-TS-I-OLP. Your advantages  Input for resistance thermometers, thermocouples, and linear mV signals, Ex ia IIC  Configuration via software  Can be installed in zone 1  2-way electrical isolation  Output: 4 mA ... 20 mA/20 mA ... 4 mA  Loop-powered  1-channel  HART-compatible (MCR-FL-TS-LP-I-EX) Key Commercial Data Packing unit 1 pc GTIN GTIN 4017918907266 Weight per Piece (excluding packing) 104.300 g Custom tariff number 85437090 Country of origin Germany Note Made to Order (non-returnable) Technical data Dimensions Width 12.5 mm Height 99 mm Depth 114.5 mm Ambient conditions 02/27/2020   Page 1 / 6 https://www.phoenixcontact.com/gb/products/2864587 Temperature measuring transducer - MCR-FL-TS-LP-I-EX - 2864587 Technical data Ambient conditions Ambient temperature (operation) -40 °C ... 55 °C Degree of protection IP20 Input data Configurable/programmable Yes, programmable Sensor types (RTD) that can be used Pt, Ni (100, 500, 1000); min. measurement range 10 K Sensor types that can be used (TC) B, C, D, E, J, K, L, N, R, S, T, U; min. measurement range 50 K/500 K Connection technology 2, 3, 4-wire Input signal range 10 Ω ... 400 Ω (min. measurement range 10 Ω) 10 Ω ... 2000 Ω (min. measurement range 100 Ω) -10 mV ... 100 mV (min. measurement range 5 mV) Output data Signal output Current output Configurable/programmable Yes Current output signal 4 mA ... 20 mA 20 mA ... 4 mA Max. current output signal ≤ 23 mA Output current with short-circuit ≤ 3.6 mA or ≥ 21 mA (adjustable, not for thermocouples) Output current with wire break ≤ 3.6 mA or ≥ 21 mA (adjustable) Output current range with overrange/underrange 3.8 mA ... 20.5 mA Load/output load current output ≤ 520 Ω (At UV = 24 V; Usupply - 12 V / 0.023 A) Configurable/programmable no Power supply Designation Loop-powered Supply voltage range 12 V DC ... 30 V DC Max. current consumption < 3.5 mA Connection data Connection method Screw connection Stripping length 8 mm Screw thread M3 Conductor cross section solid 0.2 mm² ... 2.5 mm² Conductor cross section flexible 0.2 mm² ... 2.5 mm² Conductor cross section AWG 24 ... 14 Torque 0.5 Nm ... 0.6 Nm pluggable no General Step response (10-90%)