MCR-SL-S-200-I-LP

https://www.phoenixcontact.com/us/products/2813499 Current transducers - MCR-SL-S-200-I-LP - 2813499 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) MCR current measuring transducer, for measuring sinusoidal and non-sinusoidal alternating currents, input current 0...200 A, loop-powered output with 4...20 mA Product Features  Can be retrofitted with open-up Rogowski coil  Loop-powered  30 6000 Hz true r.m.s. value measurement  Measuring range selection via slide switch     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 135.8 GRM Custom tariff number 85437090 Country of origin Japan Technical data Dimensions Width 55 mm Height 85 mm Depth 70.5 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Degree of protection IP20 Input data Input Current measuring input 10/10/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2813499 Current transducers - MCR-SL-S-200-I-LP - 2813499 Technical data Input data Input current range 0 A ... 200 A (0...100/150/200 A) Operate threshold 1 % (of final value) Setting range for min. input current 0 A ... 100 A Setting range for max. input current 0 A ... 200 A Overload capacity Depending on laid conductor Surge strength Depending on through connected conductor Frequency measuring range 30 Hz ... 6000 Hz Connection method Clamp-on cable design, diameter 18.5 mm Output data Output name Current output Current output signal 4 mA ... 20 mA Max. output current < 25 mA Load/output load current output (UB - 12 V) x 350 / 12 A Switching output Output name No switching output Power supply Supply voltage range 20 V DC ... 30 V DC Connection data Connection method Pluggable screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 14 Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Stripping length 8 mm Screw thread M3 General Maximum transmission error < 1 % (of final value) Maximum temperature coefficient < 0.025 %/K Step response (10-90%) < 340 ms Surge voltage category III Pollution degree 2 Rated insulation voltage 300 V AC (to earth) Test voltage input/output 5 kV (50 Hz, 1 min.) 10/10/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2813499 Current transducers - MCR-SL-S-200-I-LP - 2813499 Technical data General Color green Housing material Polyamide PA non-reinforced Mounting position any Conformance CE-compliant UL, USA / Canada cULus Classifications eCl@ss eCl@ss 4.0 27200303 eCl@ss 4.1 27200303 eCl@ss 5.0 27200303 eCl@ss 5.1 27200303 eCl@ss 6.0 27200303 eCl@ss 7.0 27142316 eCl@ss 8.0 27142316 ETIM ETIM 2.0 EC001440 ETIM 3.0 EC001440 ETIM 4.0 EC001440 ETIM 5.0 EC002475 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 Approvals Approvals Approvals UL Listed / cUL Listed / cUL Listed / cULus Listed / cULus Listed / cULus Listed / null / null / null / null 10/10/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2813499 Current transducers - MCR-SL-S-200-I-LP - 2813499 Approvals Ex Approvals UL Listed / cUL Listed / cUL Listed / cULus Listed / cULus Listed Approvals submitted Approval details UL Listed  cUL Listed  cUL Listed  cULus Listed  cULus Listed  cULus Listed        10/10/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2813499 Current transducers - MCR-SL-S-200-I-LP - 2813499 Approvals   Drawings Application drawing Dimensioned drawing active PLC card + – 85 55 24V UB=24V 4...20mA Mains voltage 70,5 MCR-SL-S-...-I-LP L1 L2 L3 Current monitoring Circuit diagram OUT IN U I OUT +24V Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 5 / 5