MTK BU

Module no:3104013 LabelId:3104013 Operator:Phoenix 19:06:00, Donnerstag, 28. Juni 2001 MTK-P/P with test socket screws Terminal width 5.2 (IEC) rigid 2 [mm ] solid Connection data 0.2-4 H CAL flexible stranded AWG 0.2-2.5 24-12 I U [A] [V] 16 400 NV/RMRS Order No. Pcs. Pkt. gray MTK-P/P 31 04 01 3 50 gray MTK 31 01 01 6 50 blue MTK BU 31 01 19 7 50 MTKD-P/P 31 00 02 0 50 MTKD 31 00 01 7 50 gray D-MTK 31 01 02 9 50 blue D-MTK BU 31 01 09 0 50 Color Type Description Knife disconnect terminal block, for mounting on [ or 3, with test socket screws on both sides Knife disconnect terminal block, for mounting on [ or 3, with screw connection on both sides Feed-through terminal block, without disconnect knife, with test socket screws, with screw connection Accessories (1) End cover (2) Insertion bridge, fully insulated, 2-pos. EBL 2-5 Imax. : 12 A 23 03 14 5 10 fully insulated, 3-pos. EBL 3-5 12 A 23 03 15 8 10 10-pos. EBL 10-5 12 A 23 03 13 2 10 (3) Partition plate, for visual and electrical separation of terminal groups, 1 mm thick ATS-MTK 31 01 22 3 50 (4) Screwdriver SZG 0,6 x 3,5 12 05 12 1 10 divisible, insulated spine, (5) Zack strip, 10-section white Phoenix Contact Elektronischer Katalog ZB 5 (see info) Page 1 / 2 Module no:3104013 LabelId:3104013 Operator:Phoenix 19:06:00, Donnerstag, 28. Juni 2001 Technical data Dimensions Width / length / end cover width [mm] 5.2 / 46 / 1 Height (NS 35:7.5 / NS 35:15 / NS 32) [mm] 51.5 / 59 / 56 Technical data in accordance with IEC/ DIN VDE Maximum load current / cross section 2 16 / 4 [mm ] 2 4 / 2.5 [kV] / – 6/3 –/– III / I [A] / [mm ] Max. cross section with insertion bridge (solid / stranded) Rated surge voltage / contamination class Surge voltage category / insulation material group Connection capacity stranded with ferrule without / with plastic sleeve 2 [mm ] 0.25 - 2.5 / 0.25 -1.5 Multi-conductor connection (2 conductors with same cross section) solid / stranded [mm ] stranded with ferrule without plastic sleeve [mm ] stranded with TWIN ferrule with plastic sleeve Stripping length 2 0.2 - 1.5 / 0.2 - 1.5 2 0.25 - 1.5 [mm ] 2 0.5 - 1.5 [mm] 7 Internal cylindrical gage (IEC 947-1:1988) A3 Thread M3 [Nm] Torque 0.5 - 0.6 Insulation material PA Inflammability class acc. to UL 94 V2 Temperature indices RTI / Ti 125 / 100 Approval data (UL and CSA) Nom. voltage / nom. current / conduc. sizes UL: [V] / [A] / AWG 300 / 10 / 28 - 12 CSA: [V] / [A] / AWG 300 / 15 / 28 - 12 Block diagram Phoenix Contact Elektronischer Katalog Page 2 / 2