PI-EX-RPSS

https://www.phoenixcontact.com/us/products/2865243 Repeater power supply - PI-EX-RPSS - 2865243 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Ex-i analog input: Repeater power supply, HART. Feeds intrinsically safe 2-conductor measuring transducers installed in an Ex area and transmits the 4-20 mA signal to a load in a safe area. Galvanic 3-way isolation (input / output / supply).         Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 100.0 GRM Custom tariff number 85437090 Country of origin Germany Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.4 mm Height 145 mm Depth 147 mm Ambient conditions Ambient temperature (operation) -20 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 80 °C Permissible humidity (operation) 10 % ... 95 % (non-condensing) Degree of protection IP20 Input data 10/10/2014   Page 1 / 5 https://www.phoenixcontact.com/us/products/2865243 Repeater power supply - PI-EX-RPSS - 2865243 Technical data Input data Signal input Intrinsically safe Current input signal 4 mA ... 20 mA Transmitter supply voltage > 16 V (at 20 mA) > 15.3 V (at 22.5 mA) Output data Signal output Current output Current output signal 4 mA ... 20 mA (active) 4 mA ... 20 mA (14 ... 26 V ext. source voltage) Load/output load current output < 600 Ω (at 20 mA) < 525 Ω (at 22.5 mA) Output ripple < 20 mVrms Output behavior in the event of an error 0 mA (Cable break in the input) ≥ 24 mA (Cable short-circuit in the input) Power supply Supply voltage range 19.2 V DC ... 30 V DC Max. current consumption < 60 mA (at 24 V DC) Power consumption < 1.1 W (at 24 V DC / 20 mA) General No. of channels 1 Maximum transmission error < 0.1 % (of final value) Transmission error, typical < 0.05 % (of final value) Maximum temperature coefficient < 0.01 %/K Step response (10-90%) < 600 µs (for 4 mA ... 20 mA step) Status display Green LED (supply voltage, PWR) Inflammability class according to UL 94 V0 Pollution degree 2 Surge voltage category II Housing material PBT and polyamide PA non-reinforced Color green Designation Input/output/power supply Electrical isolation 300 Vrms (Rated insulation voltage (surge voltage category II; pollution degree 2, safe isolation as per EN 61010-1)) 2.5 kV (50 Hz, 1 min., test voltage) Designation Input/output Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Designation Input/power supply 10/10/2014   Page 2 / 5 https://www.phoenixcontact.com/us/products/2865243 Repeater power supply - PI-EX-RPSS - 2865243 Technical data General Electrical isolation 375 V (Peak value in accordance with EN 60079-11) Conformance CE-compliant, additionally EN 61326 ATEX  II (1) G [Ex ia] IIC  II (1) D [Ex iaD]  II 3 (1) G Ex nA [ia] IIC T4 Functional Safety (SIL) SIL 2 according to EN 61508 Data communication (bypass) HART function Yes Protocols supported HART Safety characteristic data Integrity requirement IEC 61508 - Low demand Designation Repeater power supply operation Equipment type Type A Safety Integrity Level (SIL) Up to 2 Safe Failure Fraction (SFF) 90.9 % λSU 1.51 x 10 (151 FIT) λSD 0 λDU 4.1 x 10 (41 FIT) λDD 2.63 x 10 (263 FIT) Probability of a hazardous failure on demand (PFDAVG) 1.96 x 10 (1 year) -7 -8 -7 -4 -4 3.74 x 10 (2 years) -4 9.07 x 10 (5 years) Diagnostic coverage (DC) DCS = 0%, DCD = 86% Integrity requirement IEC 61508 - Low demand Designation Input isolating amplifier (4 ... 20 mA) Equipment type Type A Safety Integrity Level (SIL) Up to 2 Safe Failure Fraction (SFF) 91.2 % λSU 1.52 x 10 (152 FIT) λSD 0 λDU 3.8 x 10 (38 FIT) λDD 2.44 x 10 (244 FIT) Probability of a hazardous failure on demand (PFDAVG) 1.81 x 10 (1 year) -7 -8 -7 -4 -4 3.46 x 10 (2 years) -4 8.41 x 10 (5 years) 10/10/2014   Page 3 / 5 https://www.phoenixcontact.com/us/products/2865243 Repeater power supply - PI-EX-RPSS - 2865243 Technical data Safety characteristic data Diagnostic coverage (DC) DCS = 0%, DCD = 86% Safety data Max. output voltage Uo 25.2 V Max. output current Io 93 mA Max. output power Po 590 mW Group IIB Max. external inductivity Lo 4 mH Max. external capacity Co 820 nF Group IIC Max. external inductivity Lo 2 mH Max. external capacity Co 107 nF Safety-related maximum voltage Um 253 V AC Classifications eCl@ss eCl@ss 4.0 27210121 eCl@ss 4.1 27210121 eCl@ss 5.0 27210121 eCl@ss 5.1 27210121 eCl@ss 6.0 27210121 eCl@ss 7.0 27210121 eCl@ss 8.0 27210121 ETIM ETIM 2.0 EC001431 ETIM 3.0 EC001596 ETIM 4.0 EC001596 ETIM 5.0 EC001596 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 UNSPSC 12.01 39121008 UNSPSC 13.2 39121008 10/10/2014   Page 4 / 5 https://www.phoenixcontact.com/us/products/2865243 Repeater power supply - PI-EX-RPSS - 2865243 Approvals Approvals Approvals Functional Safety Ex Approvals ATEX Approvals submitted Approval details Functional Safety  Drawings Block diagram Dimensioned drawing 145 12,4 OUT IN 4...20mA + 4...20mA +- UB+ UB- - +- + UB+ UB+ UB- ACT PAS PWR UB- 147 - PI-EX-RPSS Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 5 / 5