PLC-OPIT-230UC/230AC/1

Extract from the online catalog     PLC-OPT-230UC/230AC/1 Order No.: 2900374 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900374   PLC interface, consisting of PLC-BPITC basic terminal block with Push-In Technology and plug-in miniature optocoupler, for mounting on DIN rail NS 35/7,5, input: 230 V AC/220 V DC, output: 24 - 253 V AC/0.75 A   Product notes WEEE/RoHS-compliant since: 17/11/2009 Commercial data EAN 4 046356 525640 Note Made-to-order Pack 10 Customs tariff 85364900 Country of Origin DE Catalog page information Page 85 (IF-2011) Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation at http:// www.download.phoenixcontact.com. The General Terms and Conditions of Use apply to Internet downloads. Technical data Input data Nominal input voltage UN 230 V AC (220 V DC) 220 V DC Input voltage range in reference to UN 0.8 ... 1.1 Switching threshold "0" signal in reference to UN ≤ 0.25 PHOENIX CONTACT Ltd http://www.phoenixcontact.co.uk Page 1 / 6 18-Nov-2011 PLC-OPT-230UC/230AC/1 Order No.: 2900374 http://eshop.phoenixcontact.co.uk/phoenix/treeViewClick.do?UID=2900374 Switching threshold "1" signal in reference to UN ≥ 0.8 Typical input current at UN 3.5 mA Typical response time 10 ms (at UN) Typical turn-off time 10 ms (at UN) Operating voltage display Yellow LED Type of protection Bridge rectifier Protective circuit/component Bridge rectifier Transmission frequency 3 Hz Output data Output nominal voltage range 24 V AC ... 253 V AC Limiting continuous current 0.75 A (see derating curve) Maximum inrush current 30 A (10 ms) Min. load current 10 mA Leakage current < 1 mA (in off state) Max. load value 4.5 A s Voltage drop at max. limiting continuous current