PLC-RPT- 24DC/21-21AU

Extract from the online catalog     PLC-RPT- 24DC/21-21AU Order No.: 2900338 The figure shows a version with a screw connection http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2900338   PLC-INTERFACE, consisting of PLC-BPT.../21 basic terminal block with Push-in connection and plug-in miniature relay with multi-layer contact, for mounting on NS 35/7,5 DIN rail, 2 PDTs, 24 V DC input voltage   Product notes WEEE/RoHS-compliant since: 11/18/2010 Commercial data EAN 4 046356 507356 sales group G232 Pack 10 Pcs. Customs tariff 85364900 Gross weight in pieces 0.06308 KG Net weight per piece 0.0587 KG Catalog page information Page 323 (CAT-7-2013) http:// www.download.phoenixcontact.com Please note that the data given here has been taken from the online catalog. For comprehensive information and data, please refer to the user documentation. The General Terms and Conditions of Use apply to Internet downloads. Technical data Coil side Nominal input voltage UN 24 V DC Nominal input current at UIN 18 mA Typical response time 8 ms Typical release time 10 ms Phoenix Contact (India) Pvt. Ltd. http://www.phoenixcontact.co.in Page 1 / 5 May 21, 2013 PLC-RPT- 24DC/21-21AU Order No.: 2900338 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2900338 Operating voltage display Yellow LED Protective circuit Protection against polarity reversal Polarity protection diode Free-wheeling diode Damping diode Contact side Contact type Single contact, 2-PDT Contact material AgNi, hard gold-plated Maximum switching voltage 30 V AC 36 V DC Minimum switching voltage 100 mV (at 10 mA) Maximum inrush current 50 mA Min. switching current 1 mA (at 24 V) Limiting continuous current 50 mA Interrupting rating (ohmic load) max. 1.2 W (at 24 V DC) Note the following values are applicable if a gold layer is destroyed Maximum switching voltage 250 V AC/DC Minimum switching voltage 5 V AC/DC Limiting continuous current 6A Maximum inrush current 15 A (300 ms) Min. switching current 10 mA Interrupting rating (ohmic load) max. 140 W (at 24 V DC) 85 W (at 48 V DC) 60 W (at 60 V DC) 44 W (at 110 V DC) 60 W (at 220 V DC) 1500 VA (for 250 V AC) General data Width 14 mm Height 80 mm Depth 94 mm Ambient temperature (operation) -40 °C ... 60 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Operating mode 100% operating factor Mechanical service life 3 x 10 cycles Inflammability class according to UL 94 V0 Phoenix Contact (India) Pvt. Ltd. http://www.phoenixcontact.co.in 7 Page 2 / 5 May 21, 2013 PLC-RPT- 24DC/21-21AU Order No.: 2900338 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2900338 Name Standards/regulations Standards/regulations IEC 60664 EN 50178 IEC 62103 Rated surge voltage / insulation 6 kV / Basic isolation Pollution degree 2 Surge voltage category III Mounting position Any Assembly instructions In rows with zero spacing Connection data Connection method Push-in connection Conductor cross section solid min. 0.14 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.14 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 26 Conductor cross section AWG/kcmil max 14 Stripping length 8 mm Certificates / Approvals Certification cULus Listed, cULus Recognized, GL Certifications applied for: Certification Ex: Accessories Item Designation Description NS 35/ 7,5 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m Assembly 0801762 Phoenix Contact (India) Pvt. Ltd. http://www.phoenixcontact.co.in Page 3 / 5 May 21, 2013 PLC-RPT- 24DC/21-21AU Order No.: 2900338 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2900338 0801733 NS 35/ 7,5 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length: 2000 mm 0801681 NS 35/ 7,5 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m 0801377 NS 35/ 7,5 V2A UNPERF 2000MM DIN rail, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver 1201756 NS 35/15 AL UNPERF 2000MM DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length 2000 mm 1201895 NS 35/15 CU UNPERF 2000MM DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m 1201730 NS 35/15 PERF 2000MM DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length: 2000 mm 1201714 NS 35/15 UNPERF 2000MM DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m 1201798 NS 35/15-2,3 UNPERF 2000MM DIN rail, material: Steel, unperforated, 2.3 mm thick, height 15 mm, width 35 mm, length: 2 m 2966841 PLC-ATP BK Separating plate, 2 mm thick, required at the start and end of a PLC terminal strip. Furthermore, it is used for: visual separation of groups, safe isolation of different voltages of neighboring PLC relays in acc. with DIN VDE 0106-101, isolation 1053001 ZB 10:UNBEDRUCKT Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm, Lettering field: 10.5 x 10.15 mm 1053014 ZB10,LGS:FORTL.ZAHLEN Zack marker strip, Strip, white, labeled, Can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 991 - 1000, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm 5060883 ZB10/WH-100:UNBEDRUCKT Zack marker strip, Strip, white, Unlabeled, Can be labeled with: Plotter, Mounting type: Snap into tall marker groove, For terminal block width: 10.2 mm Marking Power terminal block 2966508 PLC-ESK GY Power terminal block, for the input of up to four potentials, for mounting on NS 35/7.5 SZF 1-0,6X3,5 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100 mm, 2-component grip, with non-slip grip Tools 1204517 Phoenix Contact (India) Pvt. Ltd. http://www.phoenixcontact.co.in Page 4 / 5 May 21, 2013 PLC-RPT- 24DC/21-21AU Order No.: 2900338 http://catalog.phoenixcontact.net/phoenix/treeViewClick.do?UID=2900338 Address Phoenix Contact (India) Pvt. Ltd. A-58/2, Okhla Industrial Area, Phase - II, IND-New Delhi-110 020,India Phone +91.11.30 262 800/700 Fax +91.11.26 383 285, 41611-070/71 http://www.phoenixcontact.co.in © 2012 Phoenix Contact Technical modifications reserved; Phoenix Contact (India) Pvt. Ltd. http://www.phoenixcontact.co.in Page 5 / 5 May 21, 2013