PSI-TERMINATOR-PB

https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Active termination resistor for PROFIBUS and RS-485 bus systems. Compact design, electrical isolation between supply and data interface, bus termination can be activated, integrated programming interface. Product Description PROFIBUS or other RS-485 networks can be actively terminated at the end of the bus using the PSI-TERMINATOR-PB. This ensures safe communication even if the bus device is connected/disconnected during operation. In addition, the connectable termination enables the device to be operated as a service interface at any point in the bus system. For the operation of active programming and diagnostic devices, the required power supply is provided at the alternative D-SUB connection. Your advantages  Diagnostic LEDs for voltage and data activity  Interference-free bus communication thanks to active termination  Compact housing design  Fixed programming interface in the network  Termination can be connected externally  DIN rail mounting  Extended temperature range of -20°C ... +65°C  Electrical isolation of power supply and data interface Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356579445 Weight per Piece (excluding packing) 124.200 g Custom tariff number 85389091 Country of origin Germany Note Made to Order (non-returnable) Technical data Note 02/27/2020   Page 1 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 22.5 mm Height 99 mm Depth 56 mm Ambient conditions Ambient temperature (operation) -20 °C ... 65 °C Ambient temperature (storage/transport) -40 °C ... 85 °C Permissible humidity (operation) 30 % ... 95 % (non-condensing) Altitude ≤ 5000 m (For restrictions, see the manufacturer's declaration for altitude operation) Degree of protection IP20 General Electrical isolation DIN EN 50178 (RS-485 // VCC) Test voltage data interface/power supply 1.5 kVrms (50 Hz, 1 min.) Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Net weight 124.2 g Housing material PA 6.6-FR Color green MTBF 2383 Years (Telcordia standard, 25°C temperature, 21% operating cycle (5 days a week, 8 hours a day)) 559 Years (Telcordia standard, 40°C temperature, 34.25% operating cycle (5 days a week, 12 hours a day)) MTTF 3550 Years (SN 29500 standard, temperature 25 °C, operating cycle 21 % (5 days a week, 8 hours a day)) 1818 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day)) 849 Years (SN 29500 standard, temperature 40 °C, operating cycle 100 % (7 days a week, 24 hours a day)) Power supply Nominal supply voltage 24 V DC (via pluggable COMBICON screw terminal block) Supply voltage range 19.2 V DC ... 28.8 V DC (via pluggable COMBICON screw terminal block) Typical current consumption 45 mA (24 V DC) Interfaces Interface 1 PROFIBUS acc. to IEC 61158, RS-485 2-conductor Connection method D-SUB 9, COMBICON Transmission length ≤ 1200 m (Depends on transmission speed and cable type) Termination resistor 390 Ω 220 Ω 02/27/2020   Page 2 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Technical data Interfaces 390 Ω (Can be connected) Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 1.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 1.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 16 Serial transmission speed ≤ 12 Mbps Output nominal voltage 5 V DC Function Status and diagnostic indicators LEDs: UL (communications power), data activity (not marked) Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2014/30/EU Type of test Free fall in acc. with IEC 60068-2-32 Test result 1m Type of test Vibration resistance in acc. with EN 60068-2-6/IEC 60068-2-6 Test result 5g, 10...150 Hz, 2.5 h, in XYZ direction Type of test Shock in acc. with EN 60068-2-27/IEC 60068-2-27 Test result 25g, 11 ms period, half-sine shock pulse Free from substances that could impair the application of coating according to P-VW 3.10.7 57 65 0 VW-AUDI-Seat central standard Standards/regulations EN 61000-4-2 Contact discharge ± 6 kV (Test Level 3) Standards/regulations EN 61000-4-3 Frequency range 80 MHz ... 3 GHz (Test Level 3) Standards/regulations EN 61000-4-4 Comments Criterion B Standards/regulations EN 61000-4-5 Signal ± 1 kV (Data line, asymmetrical) Standards/regulations EN 61000-6-4 EN 61000-4-6 Frequency range 0.15 MHz ... 80 MHz Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 02/27/2020   Page 3 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Schematic diagram Block diagram Connecting cables with a shield clip 02/27/2020   Page 4 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Schematic diagram Deinstall signal cable 02/27/2020   Page 5 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Schematic diagram Power supply 02/27/2020   Page 6 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Application drawing Fixed service interface in (professional) bus system Application drawing Permanent termination at the end of the (professional) bus system 02/27/2020   Page 7 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Dimensional drawing 02/27/2020   Page 8 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Schematic diagram Push the braided shield back 02/27/2020   Page 9 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Schematic diagram Install signal cable Classifications eCl@ss eCl@ss 4.0 27240400 eCl@ss 4.1 27240400 eCl@ss 5.0 19070400 eCl@ss 5.1 19070400 eCl@ss 6.0 19070400 eCl@ss 7.0 19070403 eCl@ss 8.0 19070403 eCl@ss 9.0 19070403 ETIM ETIM 3.0 EC000673 ETIM 4.0 EC000310 ETIM 5.0 EC000448 ETIM 6.0 EC000448 ETIM 7.0 EC000448 UNSPSC UNSPSC 6.01 30211506 UNSPSC 7.0901 39121008 UNSPSC 11 39121008 02/27/2020   Page 10 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Classifications UNSPSC UNSPSC 12.01 39121008 UNSPSC 13.2 32121617 UNSPSC 18.0 32121617 UNSPSC 19.0 32121617 UNSPSC 20.0 32121617 UNSPSC 21.0 32121617 Accessories Accessories Data cable by the meter Bus system cable - PSM-CABLE-PROFIB/FC - 2744652 By the meter, Bus system cable, PROFIBUS (12 Mbps), shielded, PVC FR VI/PVC, Violet, 2-wire (1X2XAWG22/1), color single wire: Red, green, cable length: Free entry (1.0 ... 1000.0 m)     Data plug D-SUB bus connector - SUBCON-PLUS-PROFIB/90/IDC - 2313672 D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC terminal block connection     D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/IDC - 2313685 D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; IDC terminal block connection     D-SUB bus connector - SUBCON-PLUS-PROFIB/90/SC - 2313698 D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks     02/27/2020   Page 11 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Accessories D-SUB bus connector - SUBCON-PLUS-PROFIB/90/PG/SC - 2313708 D-SUB connector, 9-pos., male connector, cable entry < 90°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks     D-SUB bus connector - SUBCON-PLUS-PROFIB/35/M12 - 2902320 D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 35°. Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.     D-SUB bus connector - SUBCON-PLUS-PROFIB/90/M12 - 2902318 D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 90°. Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator.     D-SUB bus connector - SUBCON-PLUS-PROFIB/90X/M12 - 2902729 D-SUB plug, 9-pos., pin, assignment: 3, 5, 6, 8; two M12 cable glands (B-coded) under 90°. Bus system: PROFIBUS DP up to 12 Mbps. Termination resistor via separate M12 terminator. Long version; S7-compatible.     D-SUB bus connector - SUBCON-PLUS-PROFIB/SC2 - 2708232 D-SUB connector, 9-pos., male connector, cable entry < 35°, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks     02/27/2020   Page 12 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Accessories D-SUB bus connector - SUBCON-PLUS-PROFIB/PG/SC2 - 2708245 D-SUB connector, 9-pos., male connector, cable entry < 35°, bus system: PROFIBUS DP up to 12 Mbps with PG D-SUB socket for connecting a programming device, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks     D-SUB bus connector - SUBCON-PLUS-PROFIB/AX/SC - 2744380 D-SUB connector, 9-pos., male connector, axial version with two cable entries, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; screw connection terminal blocks     Interface converter Repeater - PSI-REP-PROFIBUS/12MB - 2708863 Modular repeater for electrical isolation and range increase for PROFIBUS up to 12 Mbps, 4-way isolation, railmountable, supply 24 V DC     Repeater - PSI-REP-RS485W2 - 2313096 Modular repeater for electrical isolation and range increase in RS-485 2-wire bus systems up to 500 kbps, 4-way isolation, rail-mountable, supply 24 V DC     Repeater - PSM-ME-RS485/RS485-P - 2744429 Repeater, for potential separation and range increase in RS-485 2-wire bus systems, 3-way isolation, rail-mountable     02/27/2020   Page 13 / 14 https://www.phoenixcontact.com/gb/products/2313944 Termination resistor - PSI-TERMINATOR-PB - 2313944 Accessories Interface converter - PSM-ME-RS232/RS485-P - 2744416 Interface converter, for converting RS-232 (V.24) to RS-422 (V.11) and RS-485, with electrical isolation, 2 channels, rail-mountable     Screwdriver tools Screwdriver - SZF 0-0,4X2,5 - 1204504 Actuation tool, for ST terminal blocks, also suitable for use as a bladed screwdriver, size: 0.4 x 2.5 x 75 mm, 2component grip, with non-slip grip     Stripping tool Stripping pliers - QUICK WIREFOX 6 - 1204384 Stripping tool for cables with PVC insulation, stripping range: 0.08 to 6 mm², wire cutting up to 6 mm² flexible or 4 mm² rigid     Stripping tool - PSM-STRIP-FC/PROFIB - 2744623 Quick stripping tool for PROFIBUS cable, type Fast Connect     Phoenix Contact 2020 © - all rights reserved http://www.phoenixcontact.com 02/27/2020   Page 14 / 14