PSR-PC40-2NO-1DO-24DC-SP

https://www.phoenixcontact.com/gb/products/2700589 Coupling relay - PSR-PC40-2NO-1DO-24DC-SP - 2700589 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Coupling relay for SIL 3 high and low-demand applications, couples digital output signals to the I/O, 2 enabling current paths, 1 digital signal output, safe state off applications, test pulse filter, pluggable Push-in terminal block The figure shows a version with a screw connection Your advantages  Up to SIL 3 according to IEC 61508  Forcibly guided contacts according to EN 50205  Easy proof test according to IEC 61508 thanks to integrated signal contact  Approved for Class I, Zone 2 applications  Low housing width of just 12.5 mm  Self-regulation with device-internal lock  Manually monitored and automatic activation in a single device  Long service life thanks to filtering of controller test pulses  2 enabling current paths, 1 digital signal output  Couples digital output signals from failsafe controllers to I/O devices (valves, etc.) for electrical isolation and power adaptation  Time saving push-in connection, tools not required  Potentials can be easily looped through – ideal for BUS applications  Intuitive use through colour coded actuation lever  Can be combined with the MSTB 2,5 range  Quick and convenient testing using integrated test option Key Commercial Data Packing unit 1 pc GTIN GTIN 4046356916141 Weight per Piece (excluding packing) 196.000 g Custom tariff number 85364900 Country of origin Germany 12/30/2019   Page 1 / 7 https://www.phoenixcontact.com/gb/products/2700589 Coupling relay - PSR-PC40-2NO-1DO-24DC-SP - 2700589 Technical data Note Utilization restriction EMC: class A product, see manufacturer's declaration in the download area Dimensions Width 12.5 mm Height 116.6 mm Depth 114.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 70 °C (observe derating) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) 75 % (on average, 85% infrequently, non-condensing) Max. permissible humidity (storage/transport) 75 % (on average, 85% infrequently, non-condensing) Maximum altitude ≤ 2000 m (Above sea level) Power supply Rated control circuit supply voltage US 24 V DC -15 % / +10 % (A1/A2) 20.4 V DC ... 26.4 V DC Rated control supply current IS typ. 75 mA (depending on load M1 +100 mA) Power consumption at US typ. 1.8 W Inrush current typ. 400 mA (Δt