PT 4-F-ST

https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Surge protection plug for the base element, coarse protection for four signal lines grounded on one side. Product Features  Plugs can be checked with CHECKMASTER  For systems with high dielectric strength or fine protection installed  Maximum ease of maintenance thanks to the two-piece design  Installation location - directly where meas. and control cable enters building  Base element remains an integral part of the installation  Consistent plug-in signal circuit protection  Impedance-neutral disconnection of plug for test and maintenance purposes       Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 22.67 GRM Custom tariff number 85363010 Country of origin Germany Technical data Dimensions Height 45 mm Width 17.7 mm Depth 52 mm Horizontal pitch 1 Div. Complete module height 90 mm Complete module width 17.7 mm 10/10/2014   Page 1 / 7 https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Technical data Dimensions Complete module depth 65.5 mm Ambient conditions Ambient temperature (operation) -40 °C ... 85 °C Degree of protection IP20 General Housing material PA 6.6 Inflammability class according to UL 94 V0 Color black Standards for air and creepage distances VDE 0110-1 IEC 60664-1 Mounting type On base element Type DIN rail module, two-section, divisible Direction of action Line-Line & Line-Signal Ground/Shield & Signal Ground/Shield-Earth Ground Arrester can be tested with CHECKMASTER from software version: From SW rev. 1.10 Protective circuit IEC test classification C1 C2 C3 D1 VDE requirement class C1 C2 C3 D1 Nominal voltage UN 110 V AC Maximum continuous operating voltage UC 170 V DC 120 V AC Maximum continuous voltage UC (wire-ground) 170 V DC 120 V AC Nominal current IN 2 A (80 °C) Operating effective current IC at UC ≤ 2 µA Residual current IPE ≤ 8 µA (Directly grounded) Nominal discharge current In (8/20) µs (Core-Core) 10 kA Nominal discharge current In (8/20) µs (Core-Earth) 10 kA Total surge current (8/20) µs 20 kA Max. discharge current Imax (8/20) µs maximum (Core-Earth) 20 kA 10/10/2014   Page 2 / 7 https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Technical data Protective circuit Impulse discharge current (10/350)˽µs, peak value limp 2.5 kA (per path) Output voltage limitation at 1 kV/µs (Core-Earth) spike ≤ 450 V Output voltage limitation at 1 kV/µs (Core-Earth) static ≤ 25 V Voltage protection level UP (Core-Earth) ≤ 450 V Response time tA (Core-Core) ≤ 100 ns Response time tA (Core-Earth) ≤ 100 ns Input attenuation aE, asym. 0.1 dB (≤ 1 MHz) Cut-off frequency fg (3 dB), asym. (GND) in 50 Ohm system typ. 100 MHz Capacity (Core-Earth) 2 pF Surge protection fault message None Max. required back-up fuse 2A Surge current resistance (conductor-ground) C2 - 10 kV/5 kA C1 - 1 kV/500 A C3 - 100 A D1 - 2,5 kA Connection data Connection method Screw connection (in connection with the base element) Connection type IN PLUGTRAB plug-in system Connection type OUT PLUGTRAB plug-in system Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 4 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Standards and Regulations Standards/regulations IEC 61643-21 DIN EN 61643-21 UL 497B Classifications eCl@ss eCl@ss 4.0 27140201 eCl@ss 4.1 27130801 eCl@ss 5.0 27130801 10/10/2014   Page 3 / 7 https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Classifications eCl@ss eCl@ss 5.1 27130801 eCl@ss 6.0 27130809 eCl@ss 7.0 27130809 eCl@ss 8.0 27130809 ETIM ETIM 2.0 EC001466 ETIM 3.0 EC001466 ETIM 4.0 EC001466 ETIM 5.0 EC001466 UNSPSC UNSPSC 6.01 30212010 UNSPSC 7.0901 39121610 UNSPSC 11 39121610 UNSPSC 12.01 39121610 UNSPSC 13.2 39121620 Approvals Approvals Approvals GOST Ex Approvals Approvals submitted Approval details GOST  10/10/2014   Page 4 / 7 https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Accessories Accessories Device marking Zack marker strip - ZBN 18:UNBEDRUCKT - 2809128 Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for terminal block width: 18 mm, Lettering field: 18 x 5 mm     Labeled terminal marker Zack Marker strip, flat - ZBF 5,LGS:FORTL.ZAHLEN - 0808671 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 1 - 10, 11 - 20, etc. up to 491 500, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,LGS:GERADE ZAHLEN - 0810821 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Consecutive numbers 2 - 20, 22 - 40, etc. up to 82 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Zack Marker strip, flat - ZBF 5,LGS:UNGERADE ZAHLEN - 0810863 Zack Marker strip, flat, Strip, white, labeled, Printed horizontally: Odd numbers 1 - 19, 21 - 39, etc. up to 81 - 99, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     10/10/2014   Page 5 / 7 https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Accessories Zack Marker strip, flat - ZBF 5,QR:FORTL.ZAHLEN - 0808697 Zack Marker strip, flat, Strip, white, labeled, Printed vertically: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - 100, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Marker pen Marker pen - X-PEN 0,35 - 0811228 Marker pen without ink cartridge, for manual labeling of markers, labeling extremely wipe-proof, line thickness 0.35 mm     Terminal marking Zack Marker strip, flat - ZBF 5:UNBEDRUCKT - 0808642 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.1 x 5.2 mm     Zack Marker strip, flat - ZBF 5/WH-100:UNBEDRUCKT - 0808668 Zack Marker strip, flat, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into flat marker groove, for terminal block width: 5 mm, Lettering field: 5.15 x 5.15 mm     Drawings 10/10/2014   Page 6 / 7 https://www.phoenixcontact.com/us/products/2858441 Surge protection plug - PT 4-F-ST - 2858441 Dimensioned drawing Circuit diagram 90 44,8 1 2 5 6 7 8 OUT 51,5 65,5 IN 11 12 9 10 3 4 The figure shows the complete module consisting of a base element and connector Catalog photo Figure may contain other products. Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 7 / 7