https://www.phoenixcontact.com/gb/products/1935161
PCB terminal block - PT 1,5/ 2-5,0-H - 1935161
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
PCB terminal block, Nominal current: 17.5 A, Nom. voltage: 400 V, Pitch: 5 mm, Number of positions: 2,
Connection method: Screw connection with wire protector, Mounting: Wave soldering, Conductor/PCB
connection direction: 0 °, Color: green, Also possible: Connection of a 1.5 mm² conductor with ferrule, then
however with reduction in rated voltage or degree of pollution / surge category.
The figure shows a 10-position
version of the product
Why buy this product
Well-known connection principle allows worldwide use
Low temperature rise, thanks to maximum contact force
High terminal block capacity thanks to rectangular terminal block space
Allows connection of two conductors
The latching on the side enables various numbers of positions to be combined
Key Commercial Data
Packing unit
250 STK
Minimum order quantity
250 STK
GTIN
GTIN
4017918916930
Weight per Piece (excluding packing)
1.900 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
Dimensions
Length
9 mm
Pitch
5 mm
Dimension a
5 mm
Constructional height
11.4 mm
Height
11.3 mm
Length of the solder pin
3.5 mm
01/09/2017 Page 1 / 6
https://www.phoenixcontact.com/gb/products/1935161
PCB terminal block - PT 1,5/ 2-5,0-H - 1935161
Technical data
Dimensions
Pin dimensions
1,0 mm
Pin spacing
5 mm
Hole diameter
1.3 mm
General
Range of articles
PT 1,5/..-H
Insulating material group
I
Rated surge voltage (III/3)
4 kV
Rated surge voltage (III/2)
4 kV
Rated surge voltage (II/2)
4 kV
Rated voltage (III/3)
250 V
Rated voltage (III/2)
400 V
Rated voltage (II/2)
630 V
Connection in acc. with standard
EN-VDE
Nominal current IN
17.5 A
Nominal cross section
1.5 mm²
Maximum load current
17.5 A
Insulating material
PA
Solder pin surface
Sn
Flammability rating according to UL 94
V0
Internal cylindrical gage
A1
Stripping length
5 mm
Number of positions
2
Screw thread
M2,6
Tightening torque, min
0.35 Nm
Tightening torque max
0.4 Nm
Connection data
Conductor cross section solid min.
0.2 mm²
Conductor cross section solid max.
2.5 mm²
Conductor cross section flexible min.
0.2 mm²
Conductor cross section flexible max.
2.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 1.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.25 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
1.5 mm²
Conductor cross section AWG min.
26
Conductor cross section AWG max.
14
2 conductors with same cross section, solid min.
0.2 mm²
2 conductors with same cross section, solid max.
0.75 mm²
2 conductors with same cross section, stranded min.
0.2 mm²
2 conductors with same cross section, stranded max.
0.75 mm²
01/09/2017 Page 2 / 6
https://www.phoenixcontact.com/gb/products/1935161
PCB terminal block - PT 1,5/ 2-5,0-H - 1935161
Technical data
Connection data
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.25 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
0.34 mm² The technical data regarding clamping with ferrules applies
only when using crimping pliers ZA 3. When using ferrules, it is
necessary to take into account possible restrictions regarding nominal
voltage.
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
0.75 mm² The technical data regarding clamping with ferrules applies
only when using crimping pliers ZA 3. When using ferrules, it is
necessary to take into account possible restrictions regarding nominal
voltage.
Standards and Regulations
Connection in acc. with standard
EN-VDE
CUL
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally Friendly Use Period = 50
For details about hazardous substances go to tab “Downloads”,
Category “Manufacturer's declaration”
Drawings
Drilling diagram
Diagram
Current carrying capacity [A]
a
5
4
2,5
1,3
32
28
24
20
16
12
8
4
0
1
1 = 1,5mm2
0
20
40
60
80
100
Ambient temperature [°C]
Derating diagram for 5 pins;reduction factor=1
Dimensional drawing
a+5
3,5
11,4
9
4
8,3
2,5
5
a
01/09/2017 Page 3 / 6
https://www.phoenixcontact.com/gb/products/1935161
PCB terminal block - PT 1,5/ 2-5,0-H - 1935161
Classifications
eCl@ss
eCl@ss 4.0
272607xx
eCl@ss 4.1
27141109
eCl@ss 5.0
27141190
eCl@ss 5.1
27141190
eCl@ss 6.0
27261101
eCl@ss 7.0
27440401
eCl@ss 8.0
27440401
eCl@ss 9.0
27440401
ETIM
ETIM 3.0
EC001121
ETIM 4.0
EC002643
ETIM 5.0
EC002643
ETIM 6.0
EC002643
UNSPSC
UNSPSC 6.01
30211801
UNSPSC 7.0901
39121432
UNSPSC 11
34131203
UNSPSC 12.01
39121432
UNSPSC 13.2
39121432
Approvals
Approvals
Approvals
UL Recognized / cUL Recognized / CCA / VDE Gutachten mit Fertigungsüberwachung / CCA / IECEE CB Scheme / SEV / EAC / cULus
Recognized
Ex Approvals
Approval details
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
26-12
26-12
Nominal current IN
18 A
10 A
FILE E 60425
01/09/2017 Page 4 / 6
https://www.phoenixcontact.com/gb/products/1935161
PCB terminal block - PT 1,5/ 2-5,0-H - 1935161
Approvals
B
D
Nominal voltage UN
300 V
300 V
cUL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
B
D
mm²/AWG/kcmil
26-12
26-12
Nominal current IN
18 A
10 A
Nominal voltage UN
300 V
300 V
CCA
IK-2681
http://www.vde.com/en/Institute/OnlineService/
VDE-approved-products/Pages/Online-Search.aspx
40031691
mm²/AWG/kcmil
2.5
Nominal current IN
16 A
Nominal voltage UN
250 V
VDE Gutachten mit
Fertigungsüberwachung
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
24 A
Nominal voltage UN
250 V
CCA
CCA/DE1 34070
http://www.iecee.org/
DE1-47795
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
24 A
Nominal voltage UN
250 V
IECEE CB Scheme
FILE E 60425
mm²/AWG/kcmil
0.2-2.5
Nominal current IN
24 A
Nominal voltage UN
250 V
01/09/2017 Page 5 / 6
https://www.phoenixcontact.com/gb/products/1935161
PCB terminal block - PT 1,5/ 2-5,0-H - 1935161
Approvals
SEV
https://www.electrosuisse.ch/en/meta/shop/product-certificates.html
mm²/AWG/kcmil
2.5
Nominal current IN
16 A
Nominal voltage UN
250 V
IK-3558
EAC
B.01742
cULus Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
Accessories
Accessories
Labeled terminal marker
Marker card - SK 5/3,8:FORTL.ZAHLEN - 0804183
Marker card, Card, white, labeled, Horizontal: Consecutive numbers 1 - 10, 11 - 20, etc. up to 91 - (99)100, Mounting
type: Adhesive, for terminal block width: 5 mm, Lettering field: 5 x 3.8 mm
Screwdriver tools
Screwdriver - SZS 0,6X3,5 - 1205053
Actuation tool, for ST terminal blocks, insulated, also suitable for use as a bladed screwdriver, size: 0.6 x 3.5 x 100
mm, 2-component grip, with non-slip grip
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
01/09/2017 Page 6 / 6
