https://www.phoenixcontact.com/ie/products/1050770
Photovoltaic connector - PV-C1M-C-HSG - 1050770
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Photovoltaic connector, Range of articles: PV-CF-C, Photovoltaic connector, housing material: PPE, color:
black, number of positions: 1, min. conductor cross section: 2.5 mm², max. conductor cross section: 6 mm²,
nom. voltage: 1500 V, rated current: 27 A, Connection method: Crimp, Type of contact: Pin, min. cable
diameter: 5.00 mm, max. cable diameter: 8.00 mm
Key Commercial Data
Packing unit
50 pc
Minimum order quantity
50 pc
GTIN
GTIN
4055626670218
Weight per Piece (excluding packing)
13.270 g
Technical data
Dimensions
External cable diameter
5 mm ... 8 mm
Ambient conditions
Ambient temperature (operation)
-40 °C ... 85 °C
Ambient temperature (assembly)
-25 °C ... 50 °C
General
Design
Pin
Insertion force
45 N ±10 N
Disconnect force
250 N ±50 N (when locked)
Pull-out force of cable >= disconnect force
> 80 N (IEC 62852:2014)
Insertion/withdrawal cycles
100
Degree of pollution
2
Number of positions
1
Current
40 A
Rated surge voltage (III/3)
16 kV
03/05/2021 Page 1 / 4
https://www.phoenixcontact.com/ie/products/1050770
Photovoltaic connector - PV-C1M-C-HSG - 1050770
Technical data
General
pluggable
Yes
Degree of protection
IP66 / IP68 (2 m / 24 h)
Connection cross-section AWG (min.)
14
Connection cross-section AWG (max.)
10
Rated current (2.5 mm²)
27 A
Rated current (4.0 mm²)
34 A
Rated current (6.0 mm²)
40 A
Protection class
II
Material
Color
black
Insulating material
mPPE
Contact material
Cu
Contact surface material
Ag
Connection data
Connection method
Crimp
Connection capacity
2.5 mm² ... 6 mm²
Contact resistance with connected conductor
≤ 0.45 mΩ
Stripping length
8 mm
Cable type
H1Z2Z2-K lines
Type of contact
Pin
Standards and Regulations
Flammability rating according to UL 94
V0
Safety note
• WARNING: Commission properly functioning products only. The
products must be regularly inspected for damage. Decommission
defective products immediately. Replace damaged products. Repairs
are not possible.
• WARNING: Only electrically qualified personnel may install and
operate the product. They must observe the following safety notes.
The qualified personnel must be familiar with the basics of electrical
engineering. They must be able to recognize and prevent danger. The
relevant symbol on the packaging indicates that only personnel familiar
with electrical engineering are allowed to install and operate the product.
WARNING: The connectors may not be plugged in or disconnected
under load. Ignoring the warning or improper use may damage persons
and/or property.
• The products are suitable for applications in plant, controller, and
electrical device engineering.
• Assembled products may not be manipulated or improperly opened.
• Only use mating connectors that are specified in the technical data
of the standards listed (e.g. the ones listed in the product accessories
online at phoenixcontact.com/products).
• When using the product in direct connection with third-party
manufacturers, the user is responsible.
03/05/2021 Page 2 / 4
https://www.phoenixcontact.com/ie/products/1050770
Photovoltaic connector - PV-C1M-C-HSG - 1050770
Technical data
Standards and Regulations
• For operating voltages > 50 V AC, conductive connector housings must
be grounded
• Ensure that the protective or functional ground has been properly
connected.
• Observe the corresponding technical data. You will find information:
o On the product
o On the packing label
o In the supplied documentation
o Online at phoenixcontact.com/products under the product
• The installation notes/Design In documents online on the download
page at phoenixcontact.com/products must be observed for this product.
• Use a protective cap to protect connectors that are not in use. The
suitable accessories are available online in the accessory section of the
product at phoenixcontact.com/products
• The connector warms up in normal operation. Depending on the
ambient conditions, the surface of the connector can continue to warm
up. In this case, the user is responsible for posting warnings (e.g. DIN
EN ISO 13732-1:2008-12).
• Operate the connector only when it is fully plugged in and interlocked.
• Ensure that when laying the cable, the tensile load on the connectors
does not exceed the upper limit specified in the standards.
• Observe the minimum bending radius of the cable. Lay the cable
without twisting it.
Classifications
eCl@ss
eCl@ss 10.0.1
27440107
eCl@ss 11.0
27440107
eCl@ss 9.0
27440107
Accessories
Accessories
Crimping tool
Crimping pliers - CRIMPFOX-P SR 6 - 1212755
Crimping pliers, for SUNCLIX solar crimp connectors 2.5 ... 6 mm², unlockable pressure lock, precise parallel
crimping, lateral entry, B crimp, incl. positioning tool
Photovoltaic connector
03/05/2021 Page 3 / 4
https://www.phoenixcontact.com/ie/products/1050770
Photovoltaic connector - PV-C1M-C-HSG - 1050770
Accessories
Protective cap - PV-C PROTECTION CAP - 1785430
Photovoltaic connector, Range of articles: SUNCLIX, Protective cap, color: black. self-sealing, without interlock, set
consisting of: 1 protective cap for connector side and 1 protective cap for coupling side
Crimp contact - PV-C3M-C-6-R3000 - 1050766
Photovoltaic connector, Range of articles: PV-CF-C, Crimp contact, color: black, number of positions: 1, min.
conductor cross section: 6 mm², max. conductor cross section: 6 mm², Connection method: Crimp, Type of contact:
Pin
Crimp contact - PV-C3M-C-2,5-4-R3000 - 1050768
Photovoltaic connector, Range of articles: PV-CF-C, Crimp contact, color: black, number of positions: 1, min.
conductor cross section: 2.5 mm², max. conductor cross section: 4 mm², rated current: 27 A, Connection method:
Crimp, Type of contact: Pin
Contact removal tool - PV-A-C-DC-TOOL - 1069522
Photovoltaic connector, Contact removal tool
Phoenix Contact 2021 © - all rights reserved
http://www.phoenixcontact.com
03/05/2021 Page 4 / 4