QUINT-BUFFER/24DC/20

https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Buffer module 24 V DC/20 A, maintenance-free power storage device on a capacitor basis. In the download area, there is a clearly arranged selection table available with load currents and buffer times, as well as charging times after buffer mode. Product Description Short-term mains interruptions are bridged by QUINT BUFFER, a maintenance-free buffer module on a capacitor basis. Systems can therefore also run in unstable networks or are, in the event of failures of a longer duration, correctly shut down after all relevant process data is saved. The bridging time is 200 ms at 20 A and 4 s at 1 A. The buffer module also acts as a power storage device for peak loads and for triggering fuses. For function monitoring, an active switching output and a control lamp are used. With the integrated diode, loads can be divided into buffered and unbuffered loads. Thus, the buffer period is extended and the buffered consumers are protected against errors in the internal network. Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 1140.0 g Custom tariff number 85049091 Country of origin China Technical data Dimensions Width 64 mm Height 130 mm Depth 125 mm Width with alternative assembly 122 mm Height with alternative assembly 130 mm Depth with alternative assembly 67 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C Ambient temperature (storage/transport) -40 °C ... 85 °C 05/06/2016   Page 1 / 7 https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Technical data Ambient conditions Max. permissible relative humidity (operation) ≤ 95 % (at 25 °C, non-condensing) Noise immunity EN 61000-6-2:2005 Input data Nominal input voltage 24 V DC Input voltage range 22.5 V DC ... 30 V DC Current consumption approx. 0.1 A 0.6 A (charging process) 20.6 A (max.) Current consumption (maximum) 20.6 A (max.) Current consumption (idle) approx. 0.1 A Current consumption (charging process) 0.6 A (charging process) Buffer period 0.2 s (20 A) 4 s (1 A) Type of protection Transient surge protection Protective circuit/component Suppressor diode, 35 V DC Output data Nominal output voltage 24 V DC (depending on the input voltage) Setting range of the output voltage (USet) 22 V DC ... 28.5 V DC Nominal output current (IN) 20 A Connection in parallel Yes, for increasing the buffer time and for redundancy Connection in series Yes Residual ripple < 100 mVPP (buffer mode) Output power 480 W Peak switching voltages nominal load < 100 mVPP (20 MHz) Type of protection Transient surge protection Protective circuit/component Suppressor diode, 35 V DC General IQ technology No Net weight 1 kg Memory medium Internal, capacity Operating voltage display Green LED Efficiency > 95 % Insulation voltage input/output 1 kV (routine test) 1 kV (type test) Protection class III MTBF (IEC 61709, SN 29500) > 500000 h 05/06/2016   Page 2 / 7 https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Technical data General Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm Connection data, input Connection method Screw connection Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 10 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 6 Stripping length 10 mm Screw thread M4 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 16 mm² Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 10 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 6 Stripping length 10 mm Screw thread M4 Signaling Output name Active (high = buffer module is loaded) Output description Power Good Maximum switching voltage ≤ 24 V Output voltage + 24 V Continuous load current ≤ 20 mA Status display LED "Power Good", green Note on status display Buffer module is loaded: LED ON Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section flexible min. 0.2 mm² Conductor cross section flexible max. 2.5 mm² Conductor cross section AWG min. 24 Conductor cross section AWG max. 12 05/06/2016   Page 3 / 7 https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Technical data Signaling Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Screw thread M3 Standards and Regulations Electromagnetic compatibility Conformance with EMC Directive 2004/108/EC Shock 30g in each direction, according to IEC 60068-2-27 Noise emission EN 55011 (EN 55022) Noise immunity EN 61000-6-2:2005 Connection in acc. with standard CUL Standards/regulations EN 61000-4-3 EN 61000-4-4 EN 61000-4-6 Standard – Electrical equipment of machines EN 60204-1 Standard - Safety of transformers EN 61558-2-17 Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage EN 60950-1 (SELV) and EN 60204 (PELV) Standard - Safe isolation DIN VDE 0106-101 Shipbuilding approval Germanischer Lloyd (EMC 2), ABS, DNV UL approvals UL/C-UL listed UL 508 UL/C-UL Recognized UL 60950 UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D Vibration (operation) < 15 Hz, amplitude ±2.5 mm (according to IEC 60068-2-6) Low Voltage Directive Conformance with LV directive 2006/95/EC Classifications eCl@ss eCl@ss 4.0 27040603 eCl@ss 4.1 27040603 eCl@ss 5.0 27040603 eCl@ss 5.1 27040603 eCl@ss 6.0 27040603 eCl@ss 7.0 27040603 eCl@ss 8.0 27040603 05/06/2016   Page 4 / 7 https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Classifications ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC000382 UNSPSC UNSPSC 6.01 30211510 UNSPSC 7.0901 39121011 UNSPSC 11 39121011 UNSPSC 12.01 39121011 UNSPSC 13.2 39121011 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / cUL Listed / GL / DNV / EAC / EAC / ABS / ABS / cULus Recognized / cULus Listed Ex Approvals UL Listed / cUL Listed / cULus Listed Approvals submitted Approval details UL Recognized  UL Listed  05/06/2016   Page 5 / 7 https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Approvals cUL Recognized  cUL Listed  GL  DNV  EAC  EAC  ABS  ABS  cULus Recognized  cULus Listed  Drawings 05/06/2016   Page 6 / 7 https://www.phoenixcontact.com/us/products/2866213 Buffer module - QUINT-BUFFER/24DC/20 - 2866213 Diagram Input Time [sec] Block diagram Output 100 10 1 Power Good 1 1 = QUINT-BUFFER/24DC/20 0,1 0 2,5 5 7,5 10 12,5 15 17,5 20 Current [A] Diagram Buffer time [s] 10 1 1,0 2 1 = 22,5 V 2 = 24 V 3 = 28,5 V 3 0,1 0 5 10 15 20 Output current [A] Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/06/2016   Page 7 / 7