QUINT-PS-100-240AC/12DC/10

https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) DIN rail power supply unit, primary-switched mode, 1-phase, output: 12 V DC / 10 A     Key commercial data Packing unit 1 pc Weight per Piece (excluding packing) 1474.2 GRM Custom tariff number 85044030 Country of origin Thailand Technical data Dimensions Width 85 mm Height 130 mm Depth 130 mm Width with alternative assembly 122 mm Height with alternative assembly 88 mm Depth with alternative assembly 88 mm Ambient conditions Degree of protection IP20 Ambient temperature (operation) -25 °C ... 70 °C (> 60 °C derating) Ambient temperature (storage/transport) -40 °C ... 85 °C Max. permissible relative humidity (operation) 95 % (at 25 °C, non-condensing) Input data Nominal input voltage range 100 V AC ... 240 V AC Input voltage range 85 V AC ... 264 V AC 10/10/2014   Page 1 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Technical data Input data 90 V DC ... 350 V DC AC frequency range 45 Hz ... 65 Hz Frequency range DC 0 Hz Current consumption approx. 1.5 A (120 V AC) 0.6 A (230 V AC) Nominal power consumption 120 W Inrush surge current < 15 A (typical) Power failure bypass > 50 ms (120 V AC) > 50 ms (230 V AC) Input fuse 6.3 A (slow-blow, internal) Choice of suitable fuses 10 A ... 16 A (Characteristics B, C, D, K) Output data Nominal output voltage 12 V DC ±1 % Setting range of the output voltage 11.5 V DC ... 18 V DC Output current 10 A (nominal value, up to 60°C) 16 A (with POWER BOOST) Derating 60 °C ... 70 °C (2.5%/K) Connection in parallel Yes, for redundancy and increased capacity Connection in series Yes Max. capacitive load Unlimited Residual ripple < 30 mVPP Peak switching voltages nominal load < 50 mVPP (20 MHz) Maximum power dissipation NO-Load 84 % Insulation voltage input/output 2 kV (routine test) 4 kV (type test) Protection class I (with PE connection) MTBF (IEC 61709, SN 29500) > 500000 h Mounting position horizontal DIN rail NS 35, EN 60715 Assembly instructions Can be aligned: Horizontally 0 mm, vertically 50 mm Electromagnetic compatibility Conformance with EMC directive 89/336/EC Standard - Safety of transformers EN 61558-2-17 10/10/2014   Page 2 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Technical data General Standard - Electrical safety EN 60950-1/VDE 0805 (SELV) EN 61558-2-17 Standard – Electronic equipment for use in electrical power installations and their assembly into electrical power installations EN 50178/VDE 0160 (PELV) Standard – Safety extra-low voltage EN 60950-1 (SELV) and EN 60204 (PELV) Standard - Safe isolation DIN VDE 0100-410 DIN VDE 0106-1010 Standard – Limitation of mains harmonic currents EN 61000-3-2 Standard - Equipment safety GS (tested safety) Information technology equipment - safety (CB scheme) CB Scheme UL approvals UL/C-UL Recognized UL 60950 UL/C-UL listed UL 508 UL/C-UL Listed UL 1604 Class I, Division 2, Groups A, B, C, D Connection data, input Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Stripping length 7 mm Screw thread M3 Connection data, output Connection method Screw connection Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Stripping length 7 mm Signaling Output name DC OK active Output description UOUT > 0.9 x UN: High signal Maximum switching voltage ≤ 12 V 10/10/2014   Page 3 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Technical data Signaling Output voltage + 12 V DC Maximum inrush current ≤ 40 mA Continuous load current ≤ 40 mA Status display "DC OK" LED green Note on status display UOUT < 0.9 x UN: LED flashing Conductor cross section solid min. 0.2 mm² Conductor cross section solid max. 2.5 mm² Conductor cross section stranded min. 0.2 mm² Conductor cross section stranded max. 2.5 mm² Conductor cross section AWG/kcmil min. 24 Conductor cross section AWG/kcmil max 12 Tightening torque, min 0.5 Nm Tightening torque max 0.6 Nm Screw thread M3 Output name DC OK floating Output description Relay contact, UOUT > 0.9 x UN: Contact closed Maximum switching voltage ≤ 30 V AC/DC Maximum inrush current ≤1A Continuous load current ≤1A Status display "DC OK" LED green Classifications eCl@ss eCl@ss 4.0 27040702 eCl@ss 4.1 27040702 eCl@ss 5.0 27049002 eCl@ss 5.1 27049002 eCl@ss 6.0 27049002 eCl@ss 7.0 27049002 eCl@ss 8.0 27049002 ETIM ETIM 2.0 EC001039 ETIM 3.0 EC001039 ETIM 4.0 EC000599 ETIM 5.0 EC002540 10/10/2014   Page 4 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Classifications UNSPSC UNSPSC 6.01 30211502 UNSPSC 7.0901 39121004 UNSPSC 11 39121004 UNSPSC 12.01 39121004 UNSPSC 13.2 39121004 Approvals Approvals Approvals UL Recognized / UL Listed / cUL Recognized / GOST / cUL Listed / IECEE CB Scheme / cUL Listed / cULus Recognized / cULus Listed / cULus Listed / cULus Listed / null / null / null / null Ex Approvals UL Listed / cUL Listed / cUL Listed / cULus Listed / cULus Listed Approvals submitted Approval details UL Recognized  UL Listed  cUL Recognized  GOST  10/10/2014   Page 5 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Approvals cUL Listed  IECEE CB Scheme  cUL Listed  cULus Recognized  cULus Listed  cULus Listed  cULus Listed          Accessories Accessories 10/10/2014   Page 6 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Accessories Assembly adapter Assembly adapters - QUINT-PS-ADAPTERS7/2 - 2938206 Assembly adapter for QUINT POWER 10A on S7-300 rail     Assembly adapters - UWA 182/52 - 2938235 Universal wall adapter     Mounting rail adapter Assembly adapters - UTA 107 - 2853983 Universal DIN rail adapter     Drawings Block diagram L (+) active N (-) PE PFC DC OK 13 14 10/10/2014   Page 7 / 8 https://www.phoenixcontact.com/us/products/2938811 Power supply unit - QUINT-PS-100-240AC/12DC/10 - 2938811 Diagram POWER BOOST Phoenix Contact 2014 © - all rights reserved http://www.phoenixcontact.com 10/10/2014   Page 8 / 8