REL-IR/LDP-110DC/4X21AU

https://www.phoenixcontact.com/in/products/2834119 Single relay - REL-IR/LDP-110DC/4X21 AU - 2834119 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Pluggable industrial relays with power contacts and additional hard gold plating, 4 PDT, test button, status LED, free-wheeling diode, mechanical switch position indicator, polarity A1+, A2-, coil voltage: 110 V DC Your advantages  With detectable manual operation  Integrated status LED  Mechanical switch position indicator  DC types with integrated freewheeling diode Key Commercial Data Packing unit 10 pc Minimum order quantity 10 pc GTIN GTIN 4017918941925 Weight per Piece (excluding packing) 39.060 g Custom tariff number 85364900 Country of origin Japan Technical data Dimensions Width 21.5 mm Height 28 mm Depth 36 mm Ambient conditions Ambient temperature (operation) -55 °C ... 70 °C Ambient temperature (storage/transport) -55 °C ... 70 °C Coil side 12/28/2018   Page 1 / 5 https://www.phoenixcontact.com/in/products/2834119 Single relay - REL-IR/LDP-110DC/4X21 AU - 2834119 Technical data Coil side Nominal input voltage UN 110 V DC Typical input current at UN 10 mA Typical response time 13 ms Typical release time 14 ms Coil resistance 11100 Ω ±15 % (at 20 °C) Power dissipation for nominal condition 1.1 W Contact side Contact type 4 PDTs Type of switch contact Single contact Contact material AgNi, hard gold-plated Maximum switching voltage 250 V AC/DC Minimum switching voltage 1V Min. switching current 1 mA Maximum inrush current 12 A (15 ms) Limiting continuous current 5A Interrupting rating (ohmic load) max. 1250 VA (for 250 V AC) General Test voltage relay winding/relay contact 2 kV AC (50 Hz, 1 min.) Test voltage relay contact/relay contact 2 kV AC (50 Hz, 1 min.) Operating mode 100% operating factor Degree of protection RT I Mechanical service life 5x 10 cycles Mounting position any Assembly instructions On relay base PR2 7 Standards and Regulations Standards/regulations DIN EN 61810-1 VDE 0435-201 EN 50178 Degree of pollution 2 Overvoltage category II Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 12/28/2018   Page 2 / 5 https://www.phoenixcontact.com/in/products/2834119 Single relay - REL-IR/LDP-110DC/4X21 AU - 2834119 Diagram 1,8 20 1,6 10 6 4 Switching current [A] Coil voltage U/UN Diagram 1,4 1,2 1 0,8 1 0,5 0,3 0,2 0,1 10 20 30 40 50 60 70 Ambient temperature [°C] 2 2 0,6 0 1 10 20 30 50 70 100 200 Switching voltage [V] 80 300 1 Ohmic load 2 cos j = 0.4 Operating voltage range AC interrupting rating Diagram Diagram 10 6 4 4 3 2 1 1 Cycles Switching current [A] 20 10 1 6 2 2 10 5 0,5 0,3 0,2 0,1 10 10 1 2 3 4 20 30 50 70 100 200 Switching voltage [V] 300 4 0 1 2 3 4 5 Switching current [A] L/R < 7 ms ohmic load ohmic load, 2 contacts in series ohmic load, 4 contacts in series 1 250 V AC, ohmic load 2 30 V DC, ohmic load DC interrupting rating Electrical service life Diagram Circuit diagram 1 41 44 42 31 34 32 21 24 22 11 14 12 A1 Reduction factor 0,8 0,6 A2 0,4 0,3 1 0,8 0,6 0,4 0,2 COS j Shown without LED and damping diode. Service life reduction factor 12/28/2018   Page 3 / 5 https://www.phoenixcontact.com/in/products/2834119 Single relay - REL-IR/LDP-110DC/4X21 AU - 2834119 Classifications eCl@ss eCl@ss 5.0 27371601 eCl@ss 5.1 27371600 eCl@ss 6.0 27371600 eCl@ss 7.0 27371601 eCl@ss 8.0 27371601 eCl@ss 9.0 27371601 ETIM ETIM 2.0 EC001437 ETIM 3.0 EC001437 ETIM 4.0 EC001437 ETIM 5.0 EC001437 ETIM 6.0 EC001437 UNSPSC UNSPSC 6.01 30211916 UNSPSC 7.0901 39121515 UNSPSC 11 39121515 UNSPSC 12.01 39121515 UNSPSC 13.2 39122334 Approvals Approvals Approvals UL Listed / VDE Gutachten mit Fertigungsüberwachung / cUL Listed / EAC / cULus Listed Ex Approvals Approval details UL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 VDE Gutachten mit Fertigungsüberwachung    http://www2.vde.com/de/Institut/Online-Service/ VDE-gepruefteProdukte/Seiten/Online-Suche.aspx  40026798 12/28/2018   Page 4 / 5 https://www.phoenixcontact.com/in/products/2834119 Single relay - REL-IR/LDP-110DC/4X21 AU - 2834119 Approvals cUL Listed    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  FILE E 172140 EAC      RU CDE.A*30.B.01082 cULus Listed       Accessories Additional products Relay base - PR2-BSC2/4X21 - 2833563 Relay base PR2-B, for industrial relay REL-IR with 2 or 4 PDT, 2/2-level version, screw connections, connection facility for input/interference suppression modules, for mounting on NS 35/7.5     Relay base - PR2-BSC3/4X21 - 2833576 Relay base PR2-B, for industrial relay REL-IR with 2 or 4 PDT, 1/3-level version, screw connections, connection facility for input/interference suppression modules, for mounting on NS 35/7.5     Relay base - PR2-BSP3/4X21 - 2833589 Relay base PR2-B, for industrial relay REL-IR with 2 or 4 PDT, 1/3-level version, spring-cage connections, connection facility for input/interference suppression modules, for mounting on NS 35/7.5     Phoenix Contact 2018 © - all rights reserved http://www.phoenixcontact.com 12/28/2018   Page 5 / 5