https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Ground terminal block with bolt connection technology and transparent safety contact hood, cross section: 0.1 - 6
mm², AWG: 26 - 10, width 16.3 mm, color: green-yellow
Your advantages
Low contact resistance
Corrosion-free terminal points
Another labeling option
Green-yellow housing
Key Commercial Data
Packing unit
1 pc
Minimum order quantity
50 pc
GTIN
GTIN
4046356431392
Weight per Piece (excluding packing)
40.800 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Note
Note: the BE-RT... path extension is to be used for non-insulated cable
lugs (see accessories).
Number of levels
1
Number of connections
2
Potentials
1
08/14/2019 Page 1 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Technical data
General
Nominal cross section
6 mm²
Color
green-yellow
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Designation
Level 1 above 1 below 1
Maximum load current
41 A (with 6 mm² conductor connection)
Nominal current IN
41 A
Nominal voltage UN
1000 V
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
16.3 mm
End cover width
2.2 mm
Length
66 mm
Height NS 35/7,5
51 mm
Height NS 35/15
58.5 mm
Connection data
08/14/2019 Page 2 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Technical data
Connection data
Note
Please observe the current carrying capacity of the DIN rails.
Connection
1 level
Connection method
Bolt connection
Screw thread
M5
Tightening torque, min
2.5 Nm
Tightening torque max
3 Nm
Connection in acc. with standard
IEC 60947-7-2
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
6 mm²
Conductor cross section flexible min.
0.1 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
26
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.1 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
6 mm²
Cable lug connection according to standard
DIN 46234
Min. cross section for cable lug connection
0.5 mm²
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
5.3 mm
Cable lug width, max.
10 mm
Bolt diameter
5 mm
Cable lug connection according to standard
DIN 46237
Min. cross section for cable lug connection
1 mm²
Max. cross section for cable lug connection
6 mm²
Hole diameter, min.
5.3 mm
Cable lug width, max.
10 mm
Bolt diameter
5 mm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-2
Flammability rating according to UL 94
V0
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
08/14/2019 Page 3 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Technical data
Environmental Product Compliance
No hazardous substances above threshold values
Classifications
eCl@ss
eCl@ss 4.0
27141118
eCl@ss 4.1
27141118
eCl@ss 5.0
27141118
eCl@ss 5.1
27141100
eCl@ss 6.0
27141100
eCl@ss 7.0
27141141
eCl@ss 8.0
27141141
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000901
ETIM 3.0
EC000901
ETIM 4.0
EC000901
ETIM 5.0
EC000901
ETIM 6.0
EC000897
ETIM 7.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
ABS / EAC
Ex Approvals
08/14/2019 Page 4 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Approvals
Approval details
ABS
EAC
http://www.eagle.org/eagleExternalPortalWEB/
15-GD1354709-PDA
RU CDE.A*30.B.01742
Accessories
Accessories
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized, white
passivated, length: 2000 mm, color: silver
08/14/2019 Page 5 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
DIN rail, unperforated - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Aluminum, uncoated,
length: 2000 mm, color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail perforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, unperforated, Standard profile, width: 35 mm, height: 7.5 mm, acc. to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
08/14/2019 Page 6 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
passivated with a thick layer, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, Galvanized,
white passivated, length: 2000 mm, color: silver
08/14/2019 Page 7 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Aluminum,
uncoated, length: 2000 mm, color: silver
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail perforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Steel, galvanized,
length: 2000 mm, color: silver
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, unperforated, Standard profile, width: 35 mm, height: 15 mm, similar to EN 60715, material: Copper, uncoated,
length: 2000 mm, color: copper-colored
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
08/14/2019 Page 8 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Standard profile 2.3 mm, width: 35 mm, height: 15 mm, acc. to EN 60715, material: Steel,
galvanized, passivated with a thick layer, length: 2000 mm, color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, width: 9.5 mm, height: 35.3 mm, material: PA, length: 50.5 mm, Mounting on a DIN rail NS 32 or NS 35,
color: gray
08/14/2019 Page 9 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-RT 3/5 - 3049097
End cover, length: 65 mm, width: 2.2 mm, height: 50.4 mm, color: gray
Insulating sleeve
Insulating sleeve - MPS-IH WH - 0201663
Insulating sleeve, color: white
Insulating sleeve - MPS-IH RD - 0201676
Insulating sleeve, color: red
Insulating sleeve - MPS-IH BU - 0201689
Insulating sleeve, color: blue
08/14/2019 Page 10 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Insulating sleeve - MPS-IH YE - 0201692
Insulating sleeve, color: yellow
Insulating sleeve - MPS-IH GN - 0201702
Insulating sleeve, color: green
Insulating sleeve - MPS-IH GY - 0201728
Insulating sleeve, color: gray
Insulating sleeve - MPS-IH BK - 0201731
Insulating sleeve, color: black
Jumper
Plug-in bridge - FBS 2-8 - 3030284
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
08/14/2019 Page 11 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Plug-in bridge - FBS 3-8 - 3030297
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Plug-in bridge - FBS 4-8 - 3030307
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
Plug-in bridge - FBS 5-8 - 3030310
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: red
Plug-in bridge - FBS 10-8 - 3030323
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: red
Plug-in bridge - FBS 2-8 CT - 3033830
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: orange
08/14/2019 Page 12 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Plug-in bridge - FBS 3-8 CT - 3033831
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: orange
Plug-in bridge - FBS 4-8 CT - 3033832
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: orange
Plug-in bridge - FBS 10-8 CT - 3033833
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: orange
Plug-in bridge - FBS 2-8 BU - 3032567
Plug-in bridge, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: blue
Plug-in bridge - FBS 3-8 BU - 3032570
Plug-in bridge, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: blue
08/14/2019 Page 13 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Plug-in bridge - FBS 4-8 BU - 3032583
Plug-in bridge, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: blue
Plug-in bridge - FBS 5-8 BU - 3032596
Plug-in bridge, pitch: 8.2 mm, width: 39.3 mm, number of positions: 5, color: blue
Plug-in bridge - FBS 6-8 BU - 3032677
Plug-in bridge, pitch: 8.2 mm, width: 47.5 mm, number of positions: 6, color: blue
Plug-in bridge - FBS 10-8 BU - 3032606
Plug-in bridge, pitch: 8.2 mm, width: 80.3 mm, number of positions: 10, color: blue
Labeled terminal marker
Zack marker strip - ZB 16 CUS - 0827463
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 16 mm, lettering field size: 10.5 x 16 mm
08/14/2019 Page 14 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Zack marker strip - ZB 16,LGS:L1-N,PE - 0827462
Zack marker strip, Strip, white, labeled, printed horizontally: L1, L2, L3, N, PE, mounting type: snap into tall marker
groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm
Marker for terminal blocks - UC-TM 16 CUS - 0824621
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 15.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 16 CUS - 0829637
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, mounting type:
snap into tall marker groove, for terminal block width: 16 mm, lettering field size: 14.8 x 9.6 mm
Zack marker strip - ZB 16,3 CUS - 0824946
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, mounting type: snap into
tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm
Partition plate
Partition plate - TPNS-UK - 0706647
Partition plate, length: 80 mm, width: 2 mm, height: 70 mm, color: gray
08/14/2019 Page 15 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Spacer plate - DP PS-8 - 3036741
Spacer plate, length: 22.4 mm, width: 8.2 mm, height: 29 mm, number of positions: 1, color: red
Protective cap
Path extension - BE-RT 3/5 - 3049819
Path extension, color: gray
Short-circuit connector
Short-circuit connector - FBSRH 2-8 - 3033802
Short-circuit connector, pitch: 8.2 mm, width: 14.7 mm, number of positions: 2, color: red
Short-circuit connector - FBSRH 3-8 - 3033803
Short-circuit connector, pitch: 8.2 mm, width: 22.9 mm, number of positions: 3, color: red
Short-circuit connector - FBSRH 4-8 - 3033804
Short-circuit connector, pitch: 8.2 mm, width: 31.1 mm, number of positions: 4, color: red
08/14/2019 Page 16 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Socket spanner
Tool - SHN 8 - 1209868
Socket wrench, wrench size 8 mm
Terminal marking
Zack marker strip - ZB 16:UNPRINTED - 0827461
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 16 mm, lettering field size: 16 x 10.5 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK ID COLOR, BLUEMARK ID,
BLUEMARK CLED, PLOTMARK, CMS-P1-PLOTTER, mounting type: snap into tall marker groove, for terminal block
width: 16 mm, lettering field size: 15.45 x 10.5 mm
Marker for terminal blocks - UCT-TM 16 - 0829146
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: TOPMARK NEO, TOPMARK LASER,
BLUEMARK ID COLOR, BLUEMARK ID, BLUEMARK CLED, THERMOMARK PRIME, THERMOMARK CARD 2.0,
THERMOMARK CARD, mounting type: snap into tall marker groove, for terminal block width: 16 mm, lettering field size:
14.8 x 9.6 mm
08/14/2019 Page 17 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Zack marker strip - ZB 16,3:UNPRINTED - 0820222
Zack marker strip, Strip, white, unlabeled, can be labeled with: PLOTMARK, CMS-P1-PLOTTER, mounting type: snap
into tall marker groove, for terminal block width: 16.3 mm, lettering field size: 10.5 x 16.25 mm
Test plug terminal block
Test plugs - MPS-MT - 0201744
Test plugs, with solder connection up to 1 mm² conductor cross section, color: gray
Test plugs - PS-8 - 3031005
Test plugs, color: red
Test plugs - PS-8/2,3MM RD - 3048564
Test plugs, color: red
Test socket
Test adapter - PAI-4-N GY - 3032871
4 mm test adapter, for terminal blocks with 5.2 mm, 6.2 mm and 8.2 mm pitch
08/14/2019 Page 18 / 19
https://www.phoenixcontact.com/us/products/3049974
Ground modular terminal block - RTO 5-PE-TC - 3049974
Accessories
Phoenix Contact 2019 © - all rights reserved
http://www.phoenixcontact.com
08/14/2019 Page 19 / 19