SACC-DSI-M12MSD-4CON-M16

https://www.phoenixcontact.com/gb/products/1441749 Panel feed-through - SACC-DSI-M12MSD-4CON-M16 - 1441749 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type plug, 4-pos., M12 SPEEDCON, D-coded, rear/screw mounting with M16 thread, with straight solder connection Why buy this product  Easy PCB assembly: one-piece connectors for wave soldering  All standard pin assignments and codings for signal, data, and power transmission with a uniform design-in design  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 20 STK Minimum order quantity 20 STK GTIN GTIN 4046356533447 Weight per Piece (excluding packing) 14.050 g Custom tariff number 85366990 Country of origin Germany Note Made to Order (non-returnable) Technical data Dimensions Length of the solder pin 6 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP67 General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if 01/20/2017   Page 1 / 5 https://www.phoenixcontact.com/gb/products/1441749 Panel feed-through - SACC-DSI-M12MSD-4CON-M16 - 1441749 Technical data General there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 4A Rated voltage 250 V Rated surge voltage 2.5 kV Number of positions 4 Insulation resistance ≥ 100 MΩ Coding D - data Standards/regulations M12 connector IEC 61076-2-101 Status display No Overvoltage category II Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Rear mounting M16 x 1.5 With flat nut Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, nickel-plated Sealing material NBR Cable Standards/specifications M12 connector IEC 61076-2-101 Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings 01/20/2017   Page 2 / 5 https://www.phoenixcontact.com/gb/products/1441749 Panel feed-through - SACC-DSI-M12MSD-4CON-M16 - 1441749 Dimensional drawing Schematic diagram Ø16,1 max.4,5 13,5 +0,1 Pin assignment M12 male connector, 4-pos., D-coded, male side 1x45° Housing cutout for M16 fastening thread, mounting panel with feedthrough hole (alternatively with area as anti-rotation protection for panel thicknesses > 2 mm up to max. 4.5 mm) Drilling diagram Dimensional drawing 23 11 M12x1 18 10 17 3 32 M16x1,5 Ø5 max. 4,5 Ø1,2 18 6, 8 6, 6 Dimensional drawing M12 front view Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 01/20/2017   Page 3 / 5 https://www.phoenixcontact.com/gb/products/1441749 Panel feed-through - SACC-DSI-M12MSD-4CON-M16 - 1441749 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001297 ETIM 3.0 EC002061 ETIM 4.0 EC002061 ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals EAC / cULus Recognized Ex Approvals Approval details EAC   cULus Recognized      B.01742  http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm  E221474-20140616     mm²/AWG/kcmil 22-20 Nominal current IN 4A Nominal voltage UN 250 V 01/20/2017   Page 4 / 5 https://www.phoenixcontact.com/gb/products/1441749 Panel feed-through - SACC-DSI-M12MSD-4CON-M16 - 1441749 Accessories Accessories Protective cap Sealing cap - PROT-M12 FS - 1560251 M12 sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Sealing cap - PROT-M12 FS-M - 1430488 M12 metal sealing cap for unoccupied M12 plugs of the sensor/actuator cable, flush-type plugs and I/O devices in the field     Seal Flat gasket - SACC-M16-SEAL CLM - 1430394 M16 flat gasket, for rear mounting of M12 flush-type connectors with M16 fastening thread     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 01/20/2017   Page 5 / 5