SACC-M 8MS-3PCON

https://www.phoenixcontact.com/us/products/1506752 Connector - SACC-M 8MS-3PCON - 1506752 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) ® Sensor/actuator connector, male, straight, 3-pos., M8, Piercecon , metal knurl, cable diameter max. 5 mm Product Features ■ ■ ■ Safe use in the field, thanks to a high degree of protection Flexible: connectors for on-site assembly Piercecon® connection: maximum contact density in a connector that can be assembled Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 17.2 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions External cable diameter 3 mm ... 5 mm Stripping length of the sheath 35 mm Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) Degree of protection IP68 General Rated current at 40°C 4A Rated voltage 60 V Number of positions 3 Insulation resistance ≥ 100 MΩ Coding A - standard 04/20/2016   Page 1 / 4 https://www.phoenixcontact.com/us/products/1506752 Connector - SACC-M 8MS-3PCON - 1506752 Technical data General Standards/regulations M8 connector IEC 61076-2-104 Status display No Overvoltage category II Degree of pollution 3 Connection method Piercecon fast connection Conductor cross section 0.14 mm² ... 0.38 mm² Conductor cross section AWG 22 ... 26 Wire diameter including insulation 1 mm ... 1.3 mm (Black wire clamping for 0.14 mm² ... 0.25 mm²) ® 1.3 mm ... 1.6 mm (White wire clamping for 0.25 mm² ... 0.38 mm²) Insertion/withdrawal cycles ≥ 100 Torque 0.5 Nm (Pressure nut with coupling sleeve) 0.8 Nm (Connector with coupling sleeve) 0.2 Nm (M8 knurl) Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Ni/Au Contact carrier material PA 66 Material of grip body PA 66 Material, knurls Nickel-plated brass Sealing material NBR Standards and Regulations Standard designation M8 connector Standards/regulations IEC 61076-2-104 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27260701 eCl@ss 5.1 27260701 eCl@ss 6.0 27279221 eCl@ss 7.0 27440104 eCl@ss 8.0 27440104 04/20/2016   Page 2 / 4 https://www.phoenixcontact.com/us/products/1506752 Connector - SACC-M 8MS-3PCON - 1506752 Classifications eCl@ss eCl@ss 9.0 27440102 ETIM ETIM 2.0 EC001121 ETIM 3.0 EC002062 ETIM 4.0 EC002062 ETIM 5.0 EC002062 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 31251501 Approvals Approvals Approvals EAC / EAC Ex Approvals Approvals submitted Approval details EAC  EAC  Drawings 04/20/2016   Page 3 / 4 https://www.phoenixcontact.com/us/products/1506752 Connector - SACC-M 8MS-3PCON - 1506752 Schematic diagram Dimensional drawing 4 35,4 Pin assignment M8 plug, 3-pos., view male side 11 M8 3 Ø12 1 10 M8 x 1 male plug, straight version Functional drawing ® Assembly steps for M8 connector with Piercecon connection a = Cut flush b = Coding Strip the conductor by approx. 35 mm and slide on the union nut and cable clamp type cage. Without stripping the insulation of the individual cores, guide them into the corresponding chamber of the elastic core clamping and cut them off flush on the contact side. The coding marks must be flush when mounted. Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/20/2016   Page 4 / 4