SACC-SQ-M12FS-8CON-20-L180

https://www.phoenixcontact.com/us/products/1408573 Flush-type connector - SACC-SQ-M12FS-8CON-20-L180 - 1408573 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Sensor/actuator flush-type connector, 8-pos. socket, M12, A-coded, front/square flange mounting, wave soldering Why buy this product  M12 PCB connector that can be soldered directly with integrated torsion protection and shield connection  Easy PCB assembly: one-piece connectors for wave soldering  Standard pin assignments for signal and power transmission with a uniform design-in design  SPEEDCON fast locking system reduces cabling times Key Commercial Data Packing unit 1 STK Minimum order quantity 10 STK GTIN GTIN 4046356826464 Weight per Piece (excluding packing) 14.000 g Custom tariff number 85366990 Country of origin Germany Technical data Ambient conditions Ambient temperature (operation) -25 °C ... 85 °C (Plug / socket) -40 °C ... 85 °C (without mechanical actuation) Degree of protection IP20 General 08/14/2017   Page 1 / 5 https://www.phoenixcontact.com/us/products/1408573 Flush-type connector - SACC-SQ-M12FS-8CON-20-L180 - 1408573 Technical data General Note The electrical and mechanical data specified assume that the connector pair is correctly locked and mounted. If the connector is unlocked and if there is a danger of contamination, the connector must be sealed using a protective cap > IP54. Influences arising from litz wires, cables or PCB assembly must also be taken into consideration. Rated current at 40°C 2A Rated voltage 30 V Rated surge voltage 0.8 kV Number of positions 8 Insulation resistance ≥ 100 MΩ Coding A - standard Standards/regulations M12 connector IEC 61076-2-101 Signal type/category Universal Status display No Overvoltage category III Degree of pollution 3 Connection method Solder pins Insertion/withdrawal cycles > 100 Torque 3 Nm ... 4 Nm (Installation-side) Mounting type Front mounting Square flange 20 mm side length Material Flammability rating according to UL 94 V0 Contact material CuZn Contact surface material Au Contact carrier material PA 66 Material, knurls Zinc die-cast, tin-plated Sealing material FKM Cable Conductor cross section 0.25 mm² Conductor structure signal line 14x 0.15 mm Core diameter including insulation 1.15 mm ±0.07 mm Thickness, insulation 0.21 mm Standards/specifications M12 connector IEC 61076-2-101 Insulation resistance ≥ 20 MΩ*km Conductor resistance ≤ 57.6 mΩ/m Nominal voltage, cable 300 V Test voltage, cable 2000 V AC Ambient temperature (operation) -40 °C ... 85 °C (cable, fixed installation) 08/14/2017   Page 2 / 5 https://www.phoenixcontact.com/us/products/1408573 Flush-type connector - SACC-SQ-M12FS-8CON-20-L180 - 1408573 Technical data Cable -25 °C ... 85 °C (cable, flexible installation) Standards and Regulations Standard designation M12 connector Standards/regulations IEC 61076-2-101 Flammability rating according to UL 94 V0 Environmental Product Compliance China RoHS Environmentally Friendly Use Period = 50 For details about hazardous substances go to tab “Downloads”, Category “Manufacturer's declaration” Drawings Dimensional drawing 18,3 3,1 1,1 M12x1 Ø0,8 20 M12 flush-type socket, square flange Classifications eCl@ss eCl@ss 4.0 27140815 eCl@ss 4.1 27140815 eCl@ss 5.0 27143423 eCl@ss 5.1 27143423 eCl@ss 6.0 27279220 eCl@ss 7.0 27440103 eCl@ss 8.0 27440103 eCl@ss 9.0 27440102 ETIM ETIM 3.0 EC002061 ETIM 4.0 EC002062 08/14/2017   Page 3 / 5 https://www.phoenixcontact.com/us/products/1408573 Flush-type connector - SACC-SQ-M12FS-8CON-20-L180 - 1408573 Classifications ETIM ETIM 5.0 EC002061 ETIM 6.0 EC002061 UNSPSC UNSPSC 6.01 31251501 UNSPSC 7.0901 31251501 UNSPSC 11 31251501 UNSPSC 12.01 31251501 UNSPSC 13.2 39121413 Approvals Approvals Approvals UL Recognized / cULus Recognized / EAC Ex Approvals Approval details UL Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 26-20 Nominal current IN 2A Nominal voltage UN 30 V cULus Recognized    http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm     mm²/AWG/kcmil 24-22 Nominal current IN 2A Nominal voltage UN 30 V  FILE E 118976  E221474-20140616 08/14/2017   Page 4 / 5 https://www.phoenixcontact.com/us/products/1408573 Flush-type connector - SACC-SQ-M12FS-8CON-20-L180 - 1408573 Approvals EAC      B.01742 Accessories Accessories Protective cap Screw plug - PROT-M12 - 1680539 An M12 screw plug for the unoccupied M12 sockets of the sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 SH - 1503302 An M12 screw plug for the unoccupied M12 sockets of the shielded sensor/actuator cable, boxes and flush-type connectors     Screw plug - PROT-M12 FB - 1555538 M12 high-grade steel screw plug, for unoccupied M12 sockets of the sensor/actuator cables, boxes and flush-type connectors for the food industry     Phoenix Contact 2017 © - all rights reserved http://www.phoenixcontact.com 08/14/2017   Page 5 / 5