SUBCON-PLUS-PROFIB/AX

https://www.phoenixcontact.com/us/products/2744377 D-SUB bus connector - SUBCON-PLUS-PROFIB/AX - 2744377 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) D-SUB connector, 9-pos., male connector, axial version with two cable entries, bus system: PROFIBUS DP up to 12 Mbps, termination resistor can be switched on via slide switch, pin assignment: 3, 5, 6, 8; spring-cage connection terminal blocks Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 40.0 g Custom tariff number 85366990 Country of origin Germany Technical data Dimensions Max. cable diameter 8.4 mm Min. cable diameter 7.6 mm Width 17 mm Height 31.5 mm Length 58.2 mm Ambient conditions Ambient temperature (operation) -20 °C ... 75 °C Ambient temperature (storage/transport) -25 °C ... 80 °C Altitude 5000 m (For restrictions see manufacturer's declaration) General Nominal voltage UN 5V Nominal current IN 100 mA Bus system PROFIBUS DP Signal PROFIBUS Insertion/withdrawal cycles > 200 05/03/2016   Page 1 / 5 https://www.phoenixcontact.com/us/products/2744377 D-SUB bus connector - SUBCON-PLUS-PROFIB/AX - 2744377 Technical data General SUBCON fixing screws 4-40 UNC Tightening torque 0.4 Nm Housing material ABS, metal-plated Pin assignment 3, 5, 6, 8 MTTF 6706 Years (SN 29500 standard, temperature 25°C, operating cycle 21 % (5 days a week, 8 hours a day)) 1817 Years (SN 29500 standard, temperature 40 °C, operating cycle 34.25 % (5 days a week, 12 hours a day)) 155 Years (SN 29500 standard, temperature 40°C, operating cycle 100 % (7 days a week, 24 hours a day)) Connection data Connection D-SUB connection Number of positions 9 Connection method D-SUB connector Termination resistor 390 Ω 220 Ω 390 Ω (Can be connected externally) Torque 0.4 Nm Connection PCB connection Connection method Spring-cage connection Conductor cross section solid min. 0.12 mm² Conductor cross section solid max. 0.5 mm² Conductor cross section AWG min. 26 Conductor cross section AWG max. 20 Stripping length 9 mm Torque 0.4 Nm Standards and Regulations Connection in acc. with standard CUL ATEX  II 3 G Ex nA IIC T4 Gc X Classifications eCl@ss eCl@ss 4.0 27140816 eCl@ss 4.1 27140816 eCl@ss 5.0 27143424 eCl@ss 5.1 27143424 05/03/2016   Page 2 / 5 https://www.phoenixcontact.com/us/products/2744377 D-SUB bus connector - SUBCON-PLUS-PROFIB/AX - 2744377 Classifications eCl@ss eCl@ss 6.0 27143424 eCl@ss 7.0 27440209 eCl@ss 8.0 27440302 eCl@ss 9.0 27440302 ETIM ETIM 2.0 EC001132 ETIM 3.0 EC001132 ETIM 4.0 EC001132 ETIM 5.0 EC001132 UNSPSC UNSPSC 6.01 30211802 UNSPSC 7.0901 39121402 UNSPSC 11 39121402 UNSPSC 12.01 39121402 UNSPSC 13.2 39121402 Approvals Approvals Approvals UL Recognized / cUL Recognized / CSA / EAC / cULus Recognized Ex Approvals ATEX Approvals submitted Approval details UL Recognized  05/03/2016   Page 3 / 5 https://www.phoenixcontact.com/us/products/2744377 D-SUB bus connector - SUBCON-PLUS-PROFIB/AX - 2744377 Approvals cUL Recognized  CSA  EAC  cULus Recognized  Drawings Schematic diagram Dimensional drawing 20 17 9 18 58,2 24 ON OFF Stripping specifications 31,5 05/03/2016   Page 4 / 5 https://www.phoenixcontact.com/us/products/2744377 D-SUB bus connector - SUBCON-PLUS-PROFIB/AX - 2744377 Schematic diagram Circuit diagram 6 VP 5 GND 1B 3 D(P) 1A 8 D(N) 220Ω 390Ω 390Ω 2B OFF ON S1 2A 2 4 Functional diagram of the connector range SUBCON-PLUS-PROFIB/... 3 2 1 5 Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 05/03/2016   Page 5 / 5