https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Feed-through terminal block, Connection method: Screw connection, Cross section: 10 mm² - 35 mm²,
AWG: 8 - 2, Width: 16 mm, Color: gray, Mounting type: NS 35/7,5, NS 35/15
Why buy this product
The large wiring space enables the connection of solid and stranded conductors without ferrules, even above the nominal cross section
As well as saving space, the compact design enables user-friendly wiring in a small amount of space
Optimum screwdriver guidance through closed screw shafts
Key Commercial Data
Packing unit
50 STK
GTIN
GTIN
4046356347297
Weight per Piece (excluding packing)
51.150 g
Custom tariff number
85369010
Country of origin
China
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
35 mm²
Color
gray
Insulating material
PA
Flammability rating according to UL 94
V0
Rated surge voltage
8 kV
Degree of pollution
3
Overvoltage category
III
01/18/2017 Page 1 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Technical data
General
Insulating material group
I
Maximum load current
125 A
Nominal current IN
125 A
Nominal voltage UN
1000 V
Open side panel
No
Terminal block mounting
2.5 Nm ... 3 Nm (PE foot with mounting screw, M5)
Shock protection test specification
DIN EN 50274 (VDE 0660-514):2002-11
Back of the hand protection
guaranteed
Finger protection
guaranteed
Result of surge voltage test
Test passed
Surge voltage test setpoint
9.8 kV
Result of power-frequency withstand voltage test
Test passed
Power frequency withstand voltage setpoint
2.2 kV
Result of the test for mechanical stability of terminal points (5 x
conductor connection)
Test passed
Result of bending test
Test passed
Bending test rotation speed
10 rpm
Bending test turns
135
Bending test conductor cross section/weight
10 mm² / 2 kg
35 mm² / 6.8 kg
50 mm² / 9.5 kg
Tensile test result
Test passed
Conductor cross section tensile test
10 mm²
Tractive force setpoint
90 N
Conductor cross section tensile test
35 mm²
Tractive force setpoint
190 N
Conductor cross section tensile test
50 mm²
Tractive force setpoint
236 N
Result of tight fit on support
Test passed
Tight fit on carrier
NS 35
Setpoint
10 N
Result of voltage-drop test
Test passed
Requirements, voltage drop
≤ 3.2 mV
Result of temperature-rise test
Test passed
Short circuit stability result
Test passed
Conductor cross section short circuit testing
35 mm²
Short-time current
4.2 kA
Result of thermal test
Test passed
Proof of thermal characteristics (needle flame) effective duration
30 s
Oscillation, broadband noise test result
Test passed
Test specification, oscillation, broadband noise
DIN EN 50155 (VDE 0115-200):2008-03
01/18/2017 Page 2 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Technical data
General
Test spectrum
Service life test category 1, class B, body mounted
Test frequency
f1 = 5 Hz to f2 = 150 Hz
ASD level
1.857 (m/s ) /Hz
Acceleration
0,8 g
Test duration per axis
5h
Test directions
X-, Y- and Z-axis
Shock test result
Test passed
Test specification, shock test
DIN EN 50155 (VDE 0115-200):2008-03
Shock form
Half-sine
Acceleration
5g
Shock duration
30 ms
Number of shocks per direction
3
Test directions
X-, Y- and Z-axis (pos. and neg.)
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE
0304-21))
130 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
28 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
2 2
Dimensions
Width
16 mm
Length
54.5 mm
Height NS 35/7,5
62 mm
Height NS 35/15
69.5 mm
Connection data
Note
Terminal point
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
Conductor cross section solid min.
10 mm²
01/18/2017 Page 3 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Technical data
Connection data
Conductor cross section solid max.
35 mm²
Conductor cross section AWG min.
8
Conductor cross section AWG max.
2
Conductor cross section flexible min.
10 mm²
Conductor cross section flexible max.
35 mm²
Min. AWG conductor cross section, flexible
8
Max. AWG conductor cross section, flexible
2
Conductor cross section flexible, with ferrule without plastic sleeve min.
10 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max. 35 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
10 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
35 mm²
2 conductors with same cross section, solid min.
6 mm²
2 conductors with same cross section, solid max.
16 mm²
2 conductors with same cross section, stranded min.
6 mm²
2 conductors with same cross section, stranded max.
10 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, min.
6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with
plastic sleeve, max.
10 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
6 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
10 mm²
Stripping length
16 mm
Screw thread
M6
Tightening torque, min
3.2 Nm
Tightening torque max
3.7 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
Circuit diagram
01/18/2017 Page 4 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Classifications
eCl@ss
eCl@ss 4.0
27141120
eCl@ss 4.1
27141120
eCl@ss 5.0
27141120
eCl@ss 5.1
27141120
eCl@ss 6.0
27141120
eCl@ss 7.0
27141120
eCl@ss 8.0
27141120
eCl@ss 9.0
27141120
ETIM
ETIM 2.0
EC000897
ETIM 3.0
EC000897
ETIM 4.0
EC000897
ETIM 5.0
EC000897
ETIM 6.0
EC000897
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC / EAC / UL Recognized
Ex Approvals
Approval details
EAC
7500651.22.01.00246
01/18/2017 Page 5 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Approvals
EAC
EAC-Zulassung
UL Recognized
http://database.ul.com/cgi-bin/XYV/template/LISEXT/1FRAME/index.htm
FILE E 60425
B
C
mm²/AWG/kcmil
8-2
8-2
Nominal current IN
115 A
115 A
Nominal voltage UN
600 V
600 V
Accessories
Accessories
Cover profile
Cover profile - AP 3 CM - 5022876
Cover profile for covering terminal strips, snaps onto AP 3-TU, AP 3-TNS 35 cover profile carriers, can be labeled
with AP-ES insert strip. A cover profile carrier is to be positioned at the ends and at intervals of around approx. 40
cm. Supply length: As per customer order
Cover profile carrier
Cover profile carrier - AP 3-TNS 35 - 5022672
Sealable cover profile, for mounting on NS 35/7.5 DIN rail and for fixing the cover profile AP 3, with plastic knurled nut
M5, space requirement: 13 mm
DIN rail
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
01/18/2017 Page 6 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
01/18/2017 Page 7 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
01/18/2017 Page 8 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm,
length 2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
01/18/2017 Page 9 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
End block
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
01/18/2017 Page 10 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color:
gray
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
Insertion bridge
Insertion bridge - EB 2-15 - 0203166
Insertion bridge, Pitch: 15.25 mm, Number of positions: 2, Color: gray
Insulating sleeve
Insulating sleeve - PS-IH WH - 0311566
Insulating sleeve, Color: white
01/18/2017 Page 11 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
Insulating sleeve - PS-IH RD - 0311579
Insulating sleeve, Color: red
Insulating sleeve - PS-IH BU - 0311582
Insulating sleeve, Color: blue
Insulating sleeve - PS-IH YE - 0311595
Insulating sleeve, Color: yellow
Insulating sleeve - PS-IH GN - 0311605
Insulating sleeve, Color: green
Insulating sleeve - PS-IH GY - 0311621
Insulating sleeve, Color: gray
01/18/2017 Page 12 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
Insulating sleeve - PS-IH BK - 0311634
Insulating sleeve, Color: black
Insulating sleeve - PS-IH VT - 0311618
Insulating sleeve, Color: violet
Labeled terminal marker
Zack marker strip - ZB 16 CUS - 0827463
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap
into tall marker groove, for terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Zack marker strip - ZB 16,LGS:L1-N,PE - 0827462
Zack marker strip, Strip, white, labeled, Printed horizontally: L1, L2, L3, N, PE, Mounting type: Snap into tall marker
groove, for terminal block width: 16.3 mm, Lettering field: 10.5 x 16.25 mm
Marker for terminal blocks - UC-TM 16 CUS - 0824621
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 15.45 x 10.5 mm
01/18/2017 Page 13 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
Marker for terminal blocks - UCT-TM 16 CUS - 0829637
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting
type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm
Screwdriver tools
Screwdriver - SZS 1,0X6,5 VDE - 1205079
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 6.5 x 150 mm, 2-component grip, with non-slip grip
Switching jumper
Switching jumper - SBH 2-15 - 0205232
Switching jumper, Pitch: 15 mm, Number of positions: 2, Color: silver
Terminal marking
Zack marker strip - ZB 16:UNPRINTED - 0827461
Zack marker strip, Strip, white, unlabeled, can be labeled with: CMS-P1-PLOTTER, PLOTMARK, Mounting type:
Snap into tall marker groove, for terminal block width: 16 mm, Lettering field: 16 x 10.5 mm
Marker for terminal blocks - UC-TM 16 - 0819217
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, CMSP1-PLOTTER, PLOTMARK, Mounting type: Snap into tall marker groove, for terminal block width: 16 mm, Lettering
field: 15.45 x 10.5 mm
01/18/2017 Page 14 / 15
https://www.phoenixcontact.com/gb/products/3074130
Feed-through terminal block - UK 35 N - 3074130
Accessories
Marker for terminal blocks - UCT-TM 16 - 0829146
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK PRIME, THERMOMARK
CARD, BLUEMARK CLED, BLUEMARK LED, TOPMARK LASER, Mounting type: Snap into tall marker groove, for
terminal block width: 16 mm, Lettering field: 14.8 x 9.6 mm
Test plug terminal block
Test plugs - PS-MT - 0311647
Test plugs, Color: silver
Test socket
Female test connector - PSB 6/5/6 - 0205290
Female test connector, Color: silver
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
01/18/2017 Page 15 / 15
