https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's
documentation. Our General Terms of Use for Downloads are valid
(http://phoenixcontact.com/download)
Disconnect terminal block, Connection method: Screw connection, Cross section: 0.5 mm² -10 mm² , AWG: 20 10, Width: 8.2 mm, Mounting type: NS 35/7,5, NS 35/15, NS 32, Color: gray
The figure shows a version of the
article
Why buy this product
Easy and clear testing in current transformer secondary circuits can be performed using the test disconnect terminal blocks of the URTK/S range
On both sides of the disconnect point, the terminal block has a test socket which can also be used to switch across to neighboring terminal blocks
Key Commercial Data
Packing unit
1 STK
GTIN
GTIN
4017918898243
Weight per Piece (excluding packing)
35.200 g
Custom tariff number
85369010
Country of origin
Germany
Technical data
General
Number of levels
1
Number of connections
2
Potentials
1
Nominal cross section
6 mm²
Color
gray
Insulating material
PA
01/05/2017 Page 1 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Technical data
General
Flammability rating according to UL 94
V0
Rated surge voltage
6 kV
Degree of pollution
3
Overvoltage category
III
Insulating material group
I
Maximum load current
57 A (with 10 mm² conductor cross section)
Nominal current IN
41 A
Nominal voltage UN
400 V
Open side panel
Yes
Relative insulation material temperature index (Elec., UL 746 B)
130 °C
Temperature index of insulation material (DIN EN 60216-1 (VDE 0304-21)) 125 °C
Static insulating material application in cold
-60 °C
Behavior in fire for rail vehicles (DIN 5510-2)
Test passed
Flame test method (DIN EN 60695-11-10)
V0
Oxygen index (DIN EN ISO 4589-2)
>32 %
NF F16-101, NF F10-102 Class I
2
NF F16-101, NF F10-102 Class F
2
Surface flammability NFPA 130 (ASTM E 162)
passed
Specific optical density of smoke NFPA 130 (ASTM E 662)
passed
Smoke gas toxicity NFPA 130 (SMP 800C)
passed
Calorimetric heat release NFPA 130 (ASTM E 1354)
27,5 MJ/kg
Fire protection for rail vehicles (DIN EN 45545-2) R22
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R23
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R24
HL 1 - HL 3
Fire protection for rail vehicles (DIN EN 45545-2) R26
HL 1 - HL 3
Dimensions
Width
8.2 mm
End cover width
2.2 mm
Length
72 mm
Height NS 35/7,5
51.5 mm
Height NS 35/15
59 mm
Height NS 32
56.5 mm
Connection data
Note
Terminal point
Connection method
Screw connection
Connection in acc. with standard
IEC 60947-7-1
01/05/2017 Page 2 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Technical data
Connection data
Conductor cross section solid min.
0.5 mm²
Conductor cross section solid max.
10 mm²
Conductor cross section AWG min.
20
Conductor cross section AWG max.
8
Conductor cross section flexible min.
0.5 mm²
Conductor cross section flexible max.
6 mm²
Min. AWG conductor cross section, flexible
20
Max. AWG conductor cross section, flexible
10
Conductor cross section flexible, with ferrule without plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule without plastic sleeve max.
6 mm²
Conductor cross section flexible, with ferrule with plastic sleeve min.
0.5 mm²
Conductor cross section flexible, with ferrule with plastic sleeve max.
4 mm²
2 conductors with same cross section, solid min.
0.5 mm²
2 conductors with same cross section, solid max.
2.5 mm²
2 conductors with same cross section, stranded min.
0.5 mm²
2 conductors with same cross section, stranded max.
6 mm²
2 conductors with same cross section, stranded, TWIN ferrules with plastic
0.5 mm²
sleeve, min.
2 conductors with same cross section, stranded, TWIN ferrules with plastic
4 mm²
sleeve, max.
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, min.
0.5 mm²
2 conductors with same cross section, stranded, ferrules without plastic
sleeve, max.
4 mm²
Stripping length
13 mm
Internal cylindrical gage
A5
Screw thread
M4
Tightening torque, min
1.2 Nm
Tightening torque max
1.5 Nm
Standards and Regulations
Connection in acc. with standard
IEC 60947-7-1
Flammability rating according to UL 94
V0
Environmental Product Compliance
China RoHS
Environmentally friendly use period: unlimited = EFUP-e
No hazardous substances above threshold values
Drawings
01/05/2017 Page 3 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Circuit diagram
Schematic diagram
Three-phase linked transducer test set
01/05/2017 Page 4 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Schematic diagram
Three-phase transducer test set
01/05/2017 Page 5 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Schematic diagram
Simple current transformer test circuit
a = normal operation
b = measured value testing
c = transformer short-circuit
d = relay testing
01/05/2017 Page 6 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Circuit diagram
a = open
1 = cover
3 = fixed bridge
4 = switch bar, for 2 terminal blocks, useable on both sides of the disconnect point, inward switching motion
5 = switch bar, for 2 terminal blocks, useable on both sides of the disconnect point, outward switching motion
7 = switch bar, for 3-phasige short-circuiting of linked current transformer sets, only on the right
8 = switching lock, prevents disconnect slide from being actuated
9 = separating plate, for electrical separation of neighboring bridges in terminal center
10 = partition plate
Classifications
eCl@ss
eCl@ss 4.0
27141126
eCl@ss 4.1
27141126
eCl@ss 5.0
27141126
eCl@ss 5.1
27141126
eCl@ss 6.0
27141126
eCl@ss 7.0
27141126
eCl@ss 8.0
27141126
eCl@ss 9.0
27141126
ETIM
ETIM 2.0
EC000902
01/05/2017 Page 7 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Classifications
ETIM
ETIM 3.0
EC000902
ETIM 4.0
EC000902
ETIM 5.0
EC000902
ETIM 6.0
EC000902
UNSPSC
UNSPSC 6.01
30211811
UNSPSC 7.0901
39121410
UNSPSC 11
39121410
UNSPSC 12.01
39121410
UNSPSC 13.2
39121410
Approvals
Approvals
Approvals
EAC
Ex Approvals
Approval details
EAC
EAC-Zulassung
Accessories
Accessories
Cover profile
Cover profile - AP-ME METER - 3034361
Cover profile, for covering terminal strips, snapped onto APT-ME cover profile carrier or APH-ME end bracket. A cover
profile carrier should be positioned at the ends and at intervals of around 40 cm. Length supplied: 1 m
01/05/2017 Page 8 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Cover profile carrier
Cover profile carrier - APH-ME - 3034374
Cover profile carrier, for mounting on NS 35/7,5 DIN rail, for fixing the AP-ME cover profile, can be sealed as an option
Cover profile carrier - APT-ME - 3034358
Cover profile carrier for mounting on NS 35/7.5 DIN rail for attaching the cover profile AP-ME
DIN rail
DIN rail perforated - NS 32 PERF 2000MM - 1201002
G-profile DIN rail, material: Steel, perforated, height 15 mm, width 32 mm, length 2 m
DIN rail, unperforated - NS 32 UNPERF 2000MM - 1201015
G-profile DIN rail, material: Steel, unperforated, height 15 mm, width 32 mm, length 2 m
01/05/2017 Page 9 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
DIN rail perforated - NS 35/ 7,5 PERF 2000MM - 0801733
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 7.5 mm, width 35 mm, length:
2000 mm
DIN rail, unperforated - NS 35/ 7,5 UNPERF 2000MM - 0801681
DIN rail, material: Steel, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/ 7,5 WH PERF 2000MM - 1204119
DIN rail 35 mm (NS 35)
DIN rail - NS 35/ 7,5 WH UNPERF 2000MM - 1204122
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/ 7,5 AL UNPERF 2000MM - 0801704
DIN rail, unperforated, Width: 35 mm, Height: 7.5 mm, Length: 2000 mm, Color: silver
01/05/2017 Page 10 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
DIN rail perforated - NS 35/ 7,5 ZN PERF 2000MM - 1206421
DIN rail, material: Galvanized, perforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 ZN UNPERF 2000MM - 1206434
DIN rail, material: Galvanized, unperforated, height 7.5 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/ 7,5 CU UNPERF 2000MM - 0801762
DIN rail, material: Copper, unperforated, height 7.5 mm, width 35 mm, length: 2 m
End cap - NS 35/ 7,5 CAP - 1206560
DIN rail end piece, for DIN rail NS 35/7.5
DIN rail perforated - NS 35/15 PERF 2000MM - 1201730
DIN rail, material: steel galvanized and passivated with a thick layer, perforated, height 15 mm, width 35 mm, length:
2000 mm
01/05/2017 Page 11 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
DIN rail, unperforated - NS 35/15 UNPERF 2000MM - 1201714
DIN rail, material: Steel, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail perforated - NS 35/15 WH PERF 2000MM - 0806602
DIN rail 35 mm (NS 35)
DIN rail - NS 35/15 WH UNPERF 2000MM - 1204135
DIN rail 35 mm (NS 35)
DIN rail, unperforated - NS 35/15 AL UNPERF 2000MM - 1201756
DIN rail, deep drawn, high profile, unperforated, 1.5 mm thick, material: aluminum, height 15 mm, width 35 mm, length
2000 mm
DIN rail perforated - NS 35/15 ZN PERF 2000MM - 1206599
DIN rail, material: Galvanized, perforated, height 15 mm, width 35 mm, length: 2 m
01/05/2017 Page 12 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
DIN rail, unperforated - NS 35/15 ZN UNPERF 2000MM - 1206586
DIN rail, material: Galvanized, unperforated, height 15 mm, width 35 mm, length: 2 m
DIN rail, unperforated - NS 35/15 CU UNPERF 2000MM - 1201895
DIN rail, material: Copper, unperforated, 1.5 mm thick, height 15 mm, width 35 mm, length: 2 m
End cap - NS 35/15 CAP - 1206573
DIN rail end piece, for DIN rail NS 35/15
DIN rail, unperforated - NS 35/15-2,3 UNPERF 2000MM - 1201798
DIN rail, unperforated, Width: 35 mm, Height: 15 mm, Length: 2000 mm, Color: silver
End block
End clamp - CLIPFIX 35 - 3022218
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, width: 9.5 mm, color: gray
01/05/2017 Page 13 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
End clamp - CLIPFIX 35-5 - 3022276
Quick mounting end clamp for NS 35/7,5 DIN rail or NS 35/15 DIN rail, with marking option, with parking option for
FBS...5, FBS...6, KSS 5, KSS 6, width: 5.15 mm, color: gray
End clamp - E/NS 35 N - 0800886
End clamp, width: 9.5 mm, color: gray
End clamp - E/UK - 1201442
End clamp, Width: 9.5 mm, Height: 35.3 mm, Length: 50.5 mm, Color: gray
End clamp - E/UK 1 - 1201413
End clamps, for supporting the ends of double-level and three-level terminal blocks, width: 10 mm, color: gray
End cover
End cover - D-URTK - 0310020
End cover, Length: 72 mm, Width: 2.2 mm, Height: 41.5 mm, Color: gray
01/05/2017 Page 14 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Insertion bridge
Insertion bridge - EB 2- 8 - 0202154
Insertion bridge, Pitch: 8 mm, Number of positions: 2, Color: gray
Insertion bridge - EB 3- 8 - 0202141
Insertion bridge, Pitch: 8 mm, Number of positions: 3, Color: gray
Insertion bridge - EB 10- 8 - 0202138
Insertion bridge, Pitch: 8 mm, Number of positions: 10, Color: gray
Insertion bridge - EB 4- 8 - 0202142
Insertion bridge, Pitch: 8 mm, Number of positions: 4, Color: gray
Insertion bridge - EB 3- 8/ST - 5020810
Insertion bridge, Number of positions: 3, Color: gray
01/05/2017 Page 15 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Insertion bridge - EB 1/3/5/7-8 - 3072340
Insertion bridge, Pitch: 16.4 mm, Length: 24 mm, Width: 55.4 mm, Number of positions: 4, Pin assignment: 1, 3, 5, 7,
Color: gray
Insertion bridge - EB 1/3/5-8 - 3072341
Insertion bridge, Pitch: 16.4 mm, Length: 24 mm, Width: 39 mm, Number of positions: 3, Pin assignment: 1,3,5,
Color: gray
Labeled terminal marker
Zack marker strip - ZB 8 CUS - 0825011
Zack marker strip, can be ordered: Strip, white, labeled according to customer specifications, Mounting type: Snap into
tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 CUS - 0824597
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 CUS - 0829616
Marker for terminal blocks, can be ordered: by sheet, white, labeled according to customer specifications, Mounting type:
Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
01/05/2017 Page 16 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Zack marker strip - ZB 8,LGS:FORTL.ZAHLEN - 1052015
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed horizontally: Consecutive numbers 1 - 10, 11
- 20, etc. up to 491 - 500, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field:
10.5 x 8.15 mm
Zack marker strip - ZB 8,QR:FORTL.ZAHLEN - 1052028
Zack marker strip, Strip, white, labeled, can be labeled with: Plotter, Printed vertically: Consecutive numbers 1 - 10, 11 20, etc. up to 91 - 100, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5
x 8.15 mm
Marker for terminal blocks - ZB 8,LGS:L1-N,PE - 1052413
Marker for terminal blocks, Strip, white, labeled, can be labeled with: Plotter, Horizontal: L1, L2, L3, N, PE, L1, L2, L3, N,
PE, Mounting type: Snap into tall marker groove, for terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Partition plate
Separating plate - TS-RTK - 0310211
Separating plate, Length: 72 mm, Width: 0.8 mm, Color: gray
Partition plate - ATS-RTK - 0310224
Partition plate, Length: 97.5 mm, Width: 0.8 mm, Height: 45.8 mm, Color: gray
01/05/2017 Page 17 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Separating plate - TS-UK 6-T - 3072820
Separating plate, Length: 66.5 mm, Width: 1 mm, Height: 62.5 mm, Color: gray
Screw bridge
Fixed bridge - FB 10- RTK/S - 0311171
Fixed bridge, Pitch: 8.2 mm, Number of positions: 10, Color: silver
Screwdriver tools
Screwdriver - SZS 1,0X4,0 VDE - 1205066
Screwdriver, slot-headed, VDE insulated, size: 1.0 x 4.0 x 100 mm, 2-component grip, with non-slip grip
Switching jumper
Switching jumper - ASB 2-RTK/S - 0311281
Switching jumper, Pitch: 8.2 mm, Number of positions: 2, Color: silver
01/05/2017 Page 18 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Switching jumper - USB 2-RTK/S - 0311278
Switching jumper, Pitch: 8.2 mm, Number of positions: 2, Color: silver
Switching jumper - SB 4-RTK/S - 0311265
Switching jumper, Pitch: 8.2 mm, Number of positions: 4, Color: silver
Switching jumper - SB 2-RTK/S - 0311236
Switching jumper, Pitch: 8.2 mm, Number of positions: 2, Color: silver
Switching lock
Switching lock - S-URTK/SP - 0311155
Switching lock, Length: 12 mm, Width: 8.2 mm, Color: white
Switching lock - S - 0308359
Switching lock, Length: 12 mm, Width: 8.2 mm, Color: white
01/05/2017 Page 19 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Terminal marking
Marker card - SBS 8:UNBEDRUCKT - 1007235
Marker card, Card, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, Snap into
flat marker groove, for terminal block width: 8.2 mm, Lettering field: 6 x 8.1 mm
Zack marker strip - ZB 8:UNBEDRUCKT - 1052002
Zack marker strip, Strip, white, unlabeled, can be labeled with: Plotter, Mounting type: Snap into tall marker groove, for
terminal block width: 8.2 mm, Lettering field: 10.5 x 8.15 mm
Marker for terminal blocks - UC-TM 8 - 0818072
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: BLUEMARK CLED, BLUEMARK LED, Plotter,
THERMOMARK CARD, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal block width:
8.2 mm, Lettering field: 7.6 x 10.5 mm
Marker for terminal blocks - UCT-TM 8 - 0828740
Marker for terminal blocks, Sheet, white, unlabeled, can be labeled with: THERMOMARK CARD, BLUEMARK CLED,
BLUEMARK LED, TOPMARK LASER, THERMOMARK PRIME, Mounting type: Snap into tall marker groove, for terminal
block width: 8.2 mm, Lettering field: 7.6 x 10.5 mm
Test socket
Female test connector - PSBJ-URTK/S RD - 0311744
Female test connector, Color: red
01/05/2017 Page 20 / 22
https://www.phoenixcontact.com/us/products/0710947
Disconnect terminal block - URTK/S-IB - 0710947
Accessories
Female test connector - PSBJ-URTK/S BU - 0311757
Female test connector, Color: blue
Female test connector - PSBJ-URTK/S YE - 0311731
Female test connector, Color: yellow
Female test connector - PSBJ-URTK/S GN - 0311760
Female test connector, Color: green
Female test connector - PSBJ-URTK/S VT - 0311773
Female test connector, Color: violet
Female test connector - PSBJ-URTK/S BK - 0311728
Female test connector, Color: black
01/05/2017 Page 21 / 22
https://www.phoenixcontact.com/us/products/0710947
Phoenix Contact 2017 © - all rights reserved
http://www.phoenixcontact.com
01/05/2017 Page 22 / 22
