URTKD/SP

https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Please be informed that the data shown in this PDF Document is generated from our Online Catalog. Please find the complete data in the user's documentation. Our General Terms of Use for Downloads are valid (http://phoenixcontact.com/download) Disconnect terminal block, Connection method: Screw connection, Cross section: 0.5 mm² -10 mm² , AWG: 20 10, Width: 8.2 mm, Mounting type: NS 35/7,5, NS 35/15, NS 32, Color: gray Product Features ■ ■ Touch-proof test sockets with 4 mm diameter are already permanently integrated The terminal blocks can be fitted with fixed and switchable bridges on both sides Key Commercial Data Packing unit 1 pc Weight per Piece (excluding packing) 36.84 g Custom tariff number 85369010 Country of origin Poland Technical data General Number of levels 1 Number of connections 2 Nominal cross section 6 mm² Color gray Insulating material PA Flammability rating according to UL 94 V0 Rated surge voltage 6 kV Degree of pollution 3 Overvoltage category III Insulating material group I Connection in acc. with standard IEC 60947-7-1 Nominal current IN 41 A 04/13/2016   Page 1 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Technical data General Maximum load current 50 A (with 10 mm² conductor cross section) Nominal voltage UN 500 V Open side panel No Dimensions Length 99.5 mm Width 8.2 mm Height NS 35/7,5 59 mm Height NS 35/15 66.5 mm Height NS 32 64 mm Connection data Conductor cross section solid min. 0.5 mm² Conductor cross section solid max. 10 mm² Conductor cross section flexible min. 0.5 mm² Conductor cross section flexible max. 6 mm² Conductor cross section AWG min. 20 Conductor cross section AWG max. 8 Conductor cross section flexible, with ferrule without plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule without plastic sleeve max. 6 mm² Conductor cross section flexible, with ferrule with plastic sleeve min. 0.5 mm² Conductor cross section flexible, with ferrule with plastic sleeve max. 6 mm² 2 conductors with same cross section, solid min. 0.5 mm² 2 conductors with same cross section, solid max. 2.5 mm² 2 conductors with same cross section, stranded min. 0.5 mm² 2 conductors with same cross section, stranded max. 4 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, min. 0.5 mm² 2 conductors with same cross section, stranded, ferrules without plastic sleeve, max. 2.5 mm² 2 conductors with same cross section, stranded, TWIN ferrules with plastic 0.5 mm² sleeve, min. 2 conductors with same cross section, stranded, TWIN ferrules with plastic 4 mm² sleeve, max. Connection method Screw connection Stripping length 11 mm Screw thread M4 Tightening torque, min 1.5 Nm Tightening torque max 1.8 Nm 04/13/2016   Page 2 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Technical data Standards and Regulations Connection in acc. with standard IEC 60947-7-1 Flammability rating according to UL 94 V0 Classifications eCl@ss eCl@ss 4.0 27141126 eCl@ss 4.1 27141126 eCl@ss 5.0 27141127 eCl@ss 5.1 27141127 eCl@ss 6.0 27141127 eCl@ss 7.0 27141127 eCl@ss 8.0 27141126 ETIM ETIM 2.0 EC000902 ETIM 3.0 EC000902 ETIM 4.0 EC000902 ETIM 5.0 EC000902 UNSPSC UNSPSC 6.01 30211811 UNSPSC 7.0901 39121410 UNSPSC 11 39121410 UNSPSC 12.01 39121410 UNSPSC 13.2 39121410 Approvals Approvals Approvals PRS / EAC / EAC Ex Approvals 04/13/2016   Page 3 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Approvals Approvals submitted Approval details PRS  EAC  EAC  Drawings 04/13/2016   Page 4 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Circuit diagram Schematic diagram Three-phase linked transducer test set 04/13/2016   Page 5 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Schematic diagram Three-phase transducer test set 04/13/2016   Page 6 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Schematic diagram Simple current transformer test circuit a = normal operation b = measured value testing c = transformer testing d = relay testing 04/13/2016   Page 7 / 8 https://www.phoenixcontact.com/us/products/0311142 Disconnect terminal block - URTKD/SP - 0311142 Circuit diagram a = open 1 = fixed bridge, for cross-connections in the terminal center 2 = fixed bridge, for cross connections on both sides of the disconnect point 3 = isolator bridge bar 4 = bridge bar isolator 5 = switch bar, 2-pos.,useable on both sides of the disconnect point, inward switching motion 6 = switch bar, for 4-pos. short-circuiting of linked current transformer sets, useable on both sides of the disconnect point 7 = switching lock 8 = partition plate 9 = short-circuit plug 10 = short-circuit plug Phoenix Contact 2016 © - all rights reserved http://www.phoenixcontact.com 04/13/2016   Page 8 / 8