LP-1401S25

LP-1401S Reed Switch Chain Electrical Characteristics (of unmodified Reed Switch) Contact form Contact material Contact rating max. Switching voltage max. Switching current max. Carry current max. Breakdown voltage min. Magnetical Characteristics (of unmodified Reed Switch) Pull in range available Drop out min. Test coil Test equipment tolerance Environmental Characteristics Operating temperature max. Vibration (50-2000 Hz) Shock (1/2 sin 11 ms) Soldering temperature max. (max. 10 sec.) Life Expectancy (of single Reed Switch) Resistive load Voltage 12 VDC 24 VDC W / VA VDC VAC A A VDC @ 25°C A Ru 10 200 140 1.0 1.2 240 AT AT TC ± AT @ 25°C 20-25 4 014 2 °C g g °C +125 20 100 +300 Current 0.1 A 0.4 A Operations 2 x 108 5 x 107 Material information PCB FR4, 1pc, 271.2x13.9x2mm, double sided Resistors SMD_R0805_1 KOhm 1%, 50 pcs (1 pce reverse side) Reed Switches PMC-1401 20-25 AT, modified, 50 pcs 23.5 ±0.3 Page1 of 3 Rev. 1.1, 22.05.2019, (000, 001, 009) lp1401s_ds_e_1.1 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH max. 14.2 max. Ø 2.3 nom. Ø 0.5 11.75 ±0.3 Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 9129 907089-0 Fax +49 9129 907089-99 info@pic-gmbh.com pic-gmbh.com LP-1401S Reed Switch Chain Dimensions in mm Reverse side incl. 1 resistor Page2 of 3 Rev. 1.1, 22.05.2019, (000, 001, 009) lp1401s_ds_e_1.1 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 9129 907089-0 Fax +49 9129 907089-99 info@pic-gmbh.com pic-gmbh.com LP-1401S Reed Switch Chain Schematic diagram Example of activation Ring magnet (axially magnetized) N S Example of contact and combination of PCBs Recommended inside diameter of tube: 13.9 mm Page3 of 3 Rev. 1.1, 22.05.2019, (000, 001, 009) lp1401s_ds_e_1.1 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5A 90530 Wendelstein, Germany Phone +49 9129 907089-0 Fax +49 9129 907089-99 info@pic-gmbh.com pic-gmbh.com