MS-225-3-3-0500

MS-225-3 S W I T C HI N G T HE S M A R T WAY MS-225-3 Miniature Reed Sensor M5 metal thread Electrical Characteristics @ 25 °C Contact form A Contact rating max. W / VA 10 VDC 180 VAC 130 Switching current max. A 0.7 Carry current max. A 1 Breakdown voltage min. VDC 200 Total resistance max. (initial) mΩ 300 Ω 10 9 Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Drop out min. AT 4 Test coil TC 010 Test equipment tolerance ± AT Metal housing with M5 thread Various sensitivity ranges available Customized types available Approvals 10 - 25 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Adjustable switching point @ 25 °C Pull in range available Features @ 25 °C Hz 500 Resonant frequency typ. Hz 5000 Operate time max. (incl. bounce) ms 0.5 Release time max. ms 0.3 Operating temperature °C -20 to + 85 Vibration (50-2000 Hz) g 20 Shock (1/2 sin 11 ms) g 100 Environmental Characteristics © PIC GmbH Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 4.5 g Weight per package 240 g Standard AT Ranges 1 = 10 to 15 AT 2 = 15 to 20 AT 3 = 20 to 25 AT Ordering Example MS-225-3-2 describes MS-225-3 with 15 to 20 AT. Page 1 of 2 Rev.: 2.5 ms2253_ds_e_2.5 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 9129 90 70 89-0 Fax +49 9129 90 70 89-99 info@pic-gmbh.com www.pic-gmbh.com MS-225-3 S W I T C HI N G T HE S M A R T WAY MS-225-3 Miniature Reed Sensor M5 metal thread Material Information Material Colour Housing Brass, Nickel plated Cable UL 1061, AWG 28, 4 mm stripped and tinned black Potting compound Epoxy black Nuts Brass, Nickel plated, M5, 2 pcs preassembled Test Procedure of final Reed Sensor Test Parameters Test coil TC- 093 Test programs AT range Test program 1 = MS-225-3-1 2 = MS-225-3-2 3 = MS-225-3-3 Remarks When mounted onto ferromagnetic parts switching distance of MS-225-3 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Matching actuator MSM-225 available as well. Test Coil placed in vertical position Reed Sensor aligns with bottom line Reed Sensor centered in Test Coil Measured without nuts Page 2 of 2 Rev.: 2.5 ms2253_ds_e_2.5 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 9129 90 70 89-0 Fax +49 9129 90 70 89-99 info@pic-gmbh.com www.pic-gmbh.com