MS-2431-7-3-0300

MS-2431-7 S W I T C HI N G T HE S M A R T WAY MS-2431-7 Press-fit Sensor Form B Electrical Characteristics @ 25 °C Contact form B Contact rating max. W / VA 5 VDC 175 VAC 120 Switching current max. A 0.25 Carry current max. A 1.5 Breakdown voltage min. VDC 200 Total resistance max. (initial) mΩ 200 Ω 10 9 Switching voltage max. Insulation resistance min. Magnetical Characteristics (of unmodified Reed Switch) AT Drop out min. AT 6 Test coil TC 200 Test equipment tolerance ± AT Replaces various competitors types Not ESD sensitive Approvals 10 - 30 2 Operating Characteristics (of unmodified Reed Switch) Switching frequency max. Easily mountable and removable as no tools or screws required @ 25 °C Pull in range available Features @ 25 °C Hz 100 Resonant frequency typ. Hz 1100 Operate time max. (incl. bounce) ms 0.7 Release time max. ms 1 Operating temperature °C -20 to + 85 Vibration (10-1000 Hz) g 30 Shock (1/2 sin 11 ms) g 50 Environmental Characteristics © PIC GmbH Dimensions in mm Ordering Information Packing Unit 50 pcs Weight per piece 0 g Weight per package 0 g Standard AT Ranges 1 = 10 to 15 AT 2 = 15 to 20 AT 3 = 20 to 25 AT 4 = 25 to 30 AT Ordering Example MS-2431-7-1-0300 describes MS-2431 Form B with 10-15 AT Page 1 of 2 Rev.: 1.3 ms24317_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 9129 90 70 89-0 Fax +49 9129 90 70 89-99 info@pic-gmbh.com www.pic-gmbh.com MS-2431-7 S W I T C HI N G T HE S M A R T WAY MS-2431-7 Press-fit Sensor Form B Material Information Material Colour Housing PA-GF white Cable UL 1569, AWG 24, 4mm stripped and tinned black Potting compound Epoxy black Test Procedure of final Reed Sensor Test Parameters Test coil TC- 324 Test programs AT range Test program 1 = MS-2431-7-1 2 = MS-2431-7-2 3 = MS-2431-7-3 4 = MS-2431-7-4 Remarks When mounted onto ferromagnetic parts switching distance of MS-2431-7 may reduce. Electromagnetical influences and magnetic fields may change the switching behaviour of the sensor. Recommended drill diameter 9.5 mm Matching actuator MSM-2431 available as well. Test Coil placed in vertical position Reed Sensor aligns with bottom line Reed Sensor axially centered in Test Coil Page 2 of 2 Rev.: 1.3 ms24317_ds_e_1.3 PIC Proximity Instrumentation Controls Kontaktbauelemente GmbH Nibelungenstr. 5 A 90530 Wendelstein, Germany Phone +49 9129 90 70 89-0 Fax +49 9129 90 70 89-99 info@pic-gmbh.com www.pic-gmbh.com