PC303S-12L1H

Microminiature Surface Mount Signal Relay PC303S FEATURES Microminiature design .200 inch DIL spacing 7.5 millimeter width Meets FCC part 68 voltage surge Bifurcated contacts for high sensitivity Single coil latching available Sealed, immersion cleanable File # E86876 UL/CSA RATINGS Contact Form Rated Load Max. Operating Voltage Max. Switching Power Minimum Permissible Load 2 Form C DPDT (bifurcated contacts) 2A at 30 VDC 220 VDC 60 W 10 micro A, 10 mVDC CONTACT DATA Material Initial Contact Resistance Service Life Mechanical Electrical AgPd + Au (Silver Palladium + Gold Plate) 70 mOhm max @ 1mA, 20mV 1 X 10 Operations 1 X 10 8 Operations 5 COIL DATA Type Single Side Stable .140 W Coil Voltage 3 5 6 9 12 24 3 5 6 9 12 24 Resistance ohms + 10% 64.3 178 257 579 1028 2880 90 250 360 810 1440 3840 Must Operate Voltage Max. (VDC) 2.25 3.75 4.50 6.75 9.00 18.0 2.25 3.75 4.50 6.75 9.00 18.0 Release Voltage Or Reset Voltage 0.3 0.5 0.6 0.9 1.2 2.4 -2.25 -3.75 -4.5 -6.75 -9.00 -18.0 Maximum Voltage 4.5 7.5 9.0 13.5 18.0 36.0 4.5 7.5 9.0 13.5 18.0 36.0 Coil Power Consumption mW 140 140 140 140 140 200 100 100 100 100 100 150 Single Coil Latching .100 W Note: Custom coil voltages within the ranges shown are available on special order. ORDERING INFORMATION Example: Model Coil Voltage Type of Operation Nil: Single Side Stable; L1: Single Coil Latching Type of Surface mount Nil: Standard Surface Mount; H: High Connectivity Mount PC303S -12 -L1 -H 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888)997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com PC303S Rev B 4-6-04 PAGE 1 PC303S CHARACTERISTICS Type Operate Time Set Time Release Time Reset Time Insulation Resistance Dielectric Strength Surge Strength Capacitance Shock Resistance Vibration Resistance Allowable Max. Power Consumption at 20 C Ambient Temperature Power Consumption Weight Single Side stable Single Coil Latching Less than 4 ms at nominal coil voltage N/A N/A Less than 4 ms at nominal coil voltage Less than 4 ms at nominal coil voltage N/A N/A Less than 4 ms at nominal coil voltage. 1000 Mmegohms min. at 500 VDC, 50% RH 2000 V rms, 1 min. between coil and contacts and between adjacent parts 1000 V rms, 1 min. between open contacts 2500 V, between coil and contacts (FCC Part 68) 0.4 pf max. between contacts; 0.2 pf max. between adjacent poles; 0.9 pf max. between coil and contacts Min 750 m/s2 (75 G) 10 - 55 Hz; 3.3 mm DA 0.4 W -40 degrees C to 85 degrees C 0.1 to 0.14 W 2 grams approx. PC303S Dimensions in Inches (millimeters) Drawings are 2X actual size .591 (15.0) .295 (7.5) .100 TYP. (2.54) .285 (7.24) Standard Mounting .386 (9.8) .591 (15.0) .200 (5.08) .370 (9.4) .039 (1.0) .200 (5.08) .200 (5.08) .100 (2.54) .013 (.325) .124 (3.16) High Connectivity Mounting .386 (9.8) Soldering Pad Dimensions Soldering Pad Temporary Glue Pad .075 (1.9) .200 (5.08) .370 (9.4) Single Side Stable Single Coil Latching 1 + 3 4 5 + 1 3 4 5 12 10 9 8 Notes: Pin Functions Bottom View Tolerances + .010 unless otherwise noted On single coil latching set polarity shown 12 10 9 8 Index Mark on top of relay indicates position of pins 1 & 12 Pin Functions Bottom View 3220 Commander Drive, Suite 102, Carrollton, Texas 75006 Sales: Call Toll Free (888) 997-3933 Fax (818) 342-5296 email: pickerwest@sbcglobal.net URL: pickercomponents.com PAGE 2