PE1145BEV

PE11B Series 3.3 V PECL Clock Oscillators January 2008 • Pletronics’ PE11B Series is a quartz crystal controlled precision square wave generator with an PECL output. • Solder pad compatible with many 9x14 Plastic J lead packages. • FR4 base with a mechanical metal cover. • Tape and Reel or Tube packaging is available. • • • • 10.9 to 1,100 MHZ 9.9 mm x 13.97 mm ‘B’ package Enable/Disable Function Low Jitter This series, PE11B, is not recommended for new designs. Use PE93 or PE99 series for new designs, these are not pin/pad compatible . Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 1.34 or .66 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter VCC Supply Voltage Vi Vo Input Voltage Output Voltage Unit -0.5V to +6.5V -0.5V to VCC + 0.5V -0.5V to VCC + 0.5V Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 60 to 100oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms Copyright © 2007, 2008 Pletronics Inc. to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. PE11B Series 3.3 V PECL Clock Oscillators January 2008 Part Number: PE11 45 B E V -125.0M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHz Part Marking: PLE PE99 FFFFFM C YMDXX -orPLE PE11B FFFFFM C YMDXX -orPLE PE11B FFFFFM C YMDXX -orPE11BX FFFFFM PLE XX C YYWWXX -orPE11BX FFFFFM PLE XX C YYWWXX Supply Voltage VCC V = 3.3V _ 10% + Optional Enhanced OTR E = Temperature range -40 to 85oC Series Model Frequency Stability 45 = _ 50 ppm + 44 = _ 25 ppm + 20 = _ 20 ppm + Series Model Legend: PLE = Pletronics FFFFFM = Frequency in MHz YMD or YYWW = Date of Manufacture (Year - month - day or year and week) All other marking is internal factory codes. External packaging labels and packing list will correctly identify the ordered Pletronics part number. Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 6 2006 A JAN 2 2 E 14 U 26 7 2007 B FEB 3 3 F 15 V 27 8 2008 C MAR 4 4 G 16 W 28 9 2009 D APR E MAY 5 5 H 17 X 29 0 2010 F JUN 6 6 J 18 Y 30 1 2011 G JUL 7 7 K 19 Z 31 H AUG 8 8 L 20 2 2012 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 www.pletronics.com 425-776-1880 2 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Electrical Specification for 3.30V _10% over the specified temperature range and + the frequency range of 10.9 MHZ to 766 MHZ and 876 MHZ to 1,175MHz Item Frequency Accuracy “45" “44" “20" Output Waveform Output High Level Min -50 -25 -20 Max +50 +25 +20 PECL / ECL Unit ppm Condition For all supply voltages, load changes, aging for 1 year, shock, vibration and temperatures 2.12 0.82 -1.18 2.49 1.19 -0.81 1.99 0.69 -1.31 53 0.6 2.8 300 90 0.8 +50 +50 10 10 5 +70 +85 +125 volts volts volts volts volts volts % pS RMS pS RMS pS mA Kohm volts volts uA uA nS nS mS o o o Referenced to Ground, VCC = 3.3 V Referenced to termination voltage, VCC = 3.3 V Referenced to Vcc, VCC = 3.3 V Referenced to Ground, VCC = 3.3 V Referenced to termination voltage, VCC = 3.3 V Referenced to Vcc, VCC = 3.3 V at 50% point of VCC (See load circuit) 12 KHz to 20 MHZ from the output frequency 10 Hz to 20 MHZ from the output frequency Vth is 20% and 80% of waveform Output Low Level 1.83 0.53 -1.47 Output Symmetry Jitter 47 - Output TRISE and TFALL VCC Supply Current (ICC) Enable/Disable Internal Pull-up V disable V enable Output leakage VOUT = VCC VOUT = 0V Enable time Disable time Start up time Operating Temperature Range 100 50 2.00 -50 -50 -10 - 40 to VCC Referenced to pad 3 Referenced to pad 3 Pad 1 low, device disabled Time for output to reach a logic state Time for output to reach a high Z state Time for output to reach specified frequency Standard Temperature Range Extended Temperature Range “E” Option C C C Storage Temperature Range -55 Specifications with E/D open circuit or connected to VCC www.pletronics.com 425-776-1880 3 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Typical Phase-Noise Response 0 -20 -40 dBc/Hz -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 100MHz dBc/Hz 400MHz dBc/Hz 1000MHz dBc/Hz Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh 80% 50% 20% Vlow Trise Tfall Out Out* Showing Out Measurement only www.pletronics.com 425-776-1880 4 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A ESD Rating Model Human Body Model Charged Device Model Minimum Voltage 1500 1000 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII (the PE33 will show PE11) Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial Layout and application information Recommend connecting Pad 1 and Pad 2 together to permit the design to accept Enable/Disable on both input pads For Optimum Jitter Performance, Pletronics recommends: • a ground plane under the device • no large transient signals (both current and voltage) should be routed under the device • do not layout near a large magnetic field such as a high frequency switching power supply • do not place near piezoelectric buzzers or mechanical fans. www.pletronics.com 425-776-1880 5 PE11B Series 3.3 V PECL Clock Oscillators January 2008 Mechanical: Inches A B 1 6 5 2 4 3 mm 9.65 +0.25 _ 13.97 +0.25 _ 3.40 +0.25 _ 1.57 1.27 0.72 R 4.57 2.54 1.27 0.38 0.380 +0.010 _ 0.550 +0.010 _ 0.134 +0.010 _ 0.062 0.050 0.028 R 0.180 0.100 0.050 0.015 1 C D1 E1 F1 G1 FR4 PCB Base: Solder masked All via holes tented on bottom Copper Clad ½ oz. Typical Gold plated 0.02 µinch (0.5 µm) Label: Laser engraved on the 5x7 mm oscillator that is mounted on the FR4 base Pin 3 Ground plane is typical H1 I1 Not to scale J1 Typical Dimensions PE91 Pad 1 Function Output* Note Both outputs must be terminated and biased for proper operation. The ideal termination is 50 ohms connected to 2.0V below the Supply Voltage. The outputs become a High Z when disabled and the voltage level is determined by the termination circuitry. When this pad is not connected the oscillator shall operate. This is not a recommended condition!!!!!! When this pad is