SM13TDE-18

SM13T Series Miniature SMD Crystal August 2007 • The Pletronics’ SM13T Series is a miniature surface mount crystal. • The package is ideal for automated surface mount assembly and reflow practices. • Tape and Reel packaging • • • • • • 6 MHz to 70 MHz Fundamental 40 MHz to 100 MHz 3rd Overtone 5 x 7 mm 4 pad AT Cut Crystals Ideal for use in hand held consumer products. High endurance version available Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 0.16 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Electrical Specification: Item Frequency Range Min 6 40 Calibration Frequency Tolerance Frequency Stability over OTR Equivalent Series Resistance (ESR) 10 10 Drive Level Shunt Capacitance Aging (C0) -5 -2 Operating Temperature Range Storage Temperature Range -40 -55 160 140 120 100 80 60 40 20 0 -20 -40 -60 -80 -100 -120 -140 -160 -60 -40 -20 0 20 40 60 80 100 120 Max 70 100 50 150 100 60 50 40 80 100 7 +5 +2 +125 +125 Unit MHz MHz ppm ppm Ohms Ohms Ohms Ohms Ohms μW pF ppm /Yr ppm /Yr o o Condition Fundamental 3rd overtone _ at +25oC + 3oC, see part number for options see part number for available options 6 MHz to 7.4 MHz 7.4 MHz to 9.8 MHz 9.8 MHz to 20 MHz 20 MHz to 70 MHz 40 MHz to 100 MHz use 10 μW for testing Pad to Pad capacitance for the first year at +25oC + 3oC _ after the first year at +25oC + 3oC _ see part number for available options 3rd Overtone Fundamental C C Deviation (ppm) AT Cut Crystal Frequency versus Temperature Typical Performance: Temperature (oC) Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necesarily include testing of all parameters. Copyright © 2006, 2007, Pletronics Inc. SM13T Series Miniature SMD Crystal August 2007 Part Number: SM13T -18 -12.0M -50 H 1 EG -XX See chart below for available options Internal code or blank Highest Specified Operating Temperature A = 40oC G = 70oC N = 100oC B = 45oC H = 75oC P = 105oC C = 50oC J = 80oC R = 110oC o o D = 55 C K = 85 C S = 115oC E = 60oC L = 90oC T = 120oC o o F = 65 C M = 95 C U = 125oC Lowest Specified Operating Temperature F = -15oC L = -40oC A = +10oC o o B = +5 C G = -20 C M = -45oC C = 0oC H = -25oC N = -50oC o o D = -5 C J = -30 C P = -55oC o o E = -10 C K = -35 C Mode: 1 = Fundamental Frequency Stability 3 =3rd Overtone See chart below Calibration Frequency Tolerance (Typ. Values shown) _ 10 = + 10 ppm at 25oC + 3oC _ 20 = + 20 ppm at 25oC + 3oC _ _ _ 50 = + 50 ppm at 25oC + 3oC (Standard) _ Frequency in MHz Cload in pF Load Resonance from 06 to 32 pF (18 pF Std) -orSR = Series Resonance Series Model SM13T = Standard Version SM13TS = High Endurance Version Available Frequency Stability versus Temperature in ppm Operating Temperature Range 0 to +45oC 0 to +50oC 0 to +60oC 0 to +70oC -10 to +50oC -10 to +60oC -10 to +75oC -20 to +70oC -20 to +75oC -30 to +75oC -30 to +80oC -30 to +85oC -35 to +80oC -40 to +85oC -40 to +90oC -40 to +105oC -40 to +125oC A CODE CB CC CE CG EC EE EH GG GH JH JJ JK KJ LK LL LP LU + 3.0 _ B + 5.0 _ C + 8.0 _ D + 10 _ E + 15 _ F + 20 _ G + 30 _ H + 50 _ J + 100 _ K + 150 _ ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! STD ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! ! www.pletronics.com 425-776-1880 2 SM13T Series Miniature SMD Crystal August 2007 Legacy Part Number (not for new designs): SM13T B E -18 -11.0592M -XX Internal code or blank Frequency in MHz Cload in pF Parallel Resonance from 6 to 32 pF or SR = Series Resonance Operating Temperature Range Blank = 0 to + 70oC E = -40 to +85oC Calibration Tolerance / Frequency Stability Blank = 50/50 (Standard) A = 30/50 B = 30/30 C = 15/30 D = 10/20 (not all frequencies) Series Model SM13T = Standard Version SM13TS = High Endurance Version Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition for SM13T MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A SM13TS Condition D Condition B same same Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial www.pletronics.com 425-776-1880 3 SM13T Series Miniature SMD Crystal August 2007 Mechanical: Inches A B C D1 E 1 mm 5.0 + 0.2 _ 7.0 + 0.2 _ 1.1 max 1.0 1.54 4.6 0.197 + 0.008 _ 0.276 + 0.008 _ 0.044 max 0.039 0.061 0.181 F1 1 Typical dimensions Not to Scale Contacts : Gold 11.8 μinches 0.3 μm minimum over Nickel 50 to 350 μinches 1.27 to 8.89 μm Connection (top view): The pads shown not connected to the crystal are common and connected to the metal cover. Layout and application information • Trace lengths to the crystal should be kept as short as possible. • The crystal connections are sensitive to noise. • The package should be grounded for optimum performance. www.pletronics.com 425-776-1880 4 SM13T Series Miniature SMD Crystal August 2007 Part Marking: SM13Tx FFF.FFF M PLEymdz or SM13TSx FFF.FFF M PLEymdz or SM13T-zz FFF.FFF M PLEyywwz Legend: PLE = Pletronics x = Capacitance load code from below FFF.FFM = Frequency in MHz YMD = Date of Manufacture (year, month and day) All other marking is internal factory codes Specifications such as frequency tolerance and operating temperature range, etc. are not identified from the marking. External packaging labels and packing list will correctly identify the ordered Pletronics part number. • • Orientation of marking may be mixed on the tape Traceability of part is lost once removed from reel B C D 8 E F G H J K L M N P Q R S T U VW X Y Code A pF 10 12 13 15 18 20 22 24 26 28 30 32 34 36 27 series 33 50 19 16 17 14 Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 6 2006 A JAN 2 2 E 14 U 26 7 2007 B FEB 3 3 F 15 V 27 8 2008 C MAR 4 4 G 16 W 28 9 2009 D APR E MAY 5 5 H 17 X 29 0 2010 F JUN 6 6 J 18 Y 30 1 2011 G JUL 7 7 K 19 Z 31 H AUG 8 8 L 20 2 2012 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 www.pletronics.com 425-776-1880 5 SM13T Series Miniature SMD Crystal August 2007 Reflow Cycle (typical for lead free processing) Temperature (°C) 250 200 150 100 175°C±10°C 260°C Maximum 10 Seconds Maximum 215°C±10°C 120 to 160 Seconds Approximately 50 Seconds Allowed rate of temperature change Maximum 4°C per second The part may be reflowed 2 times without degradation. Tape and Reel: available for quantities of 250 to 3000 per reel (