SM23CB-10

Pl tronics., Inc. 19013 36th Ave. W, Suite H Lynnwood, WA 98036 USA Manufacturer of High Quality Frequency Control Products SM23C Crystal 4 Pad 11.6x5.5mm Surface Mount Crystal (Ceramic Cover /Ceramic Base) 3.570 MHz – 120.000 MHz Standard Specifications Calibration Frequency Tolerance at 25 °C Operating Temperature Range (OTR) Frequency Stability (FS) over OTR Drive Level Aging at 25°C ± 30 PPM is standard, tighter tolerances available 0 to +70°C is standard, but can be extended to -40 to +85°C ± 50 PPM is standard, tighter tolerances available 100 mW is standard, customer may specify ± 5 PPM maximum ESR Values Oscillation Mode Frequency Range (MHz) Maximum ESR (Ohms) Part Numbering Guide Portions of the part number that appear after the frequency may not be marked on part (C of C provided) SM23C B E - xx - 70.0M - XXX (Internal Code or blank) Model Cal Tol / Freq Stability Blank = 30/50 B = 30/30 C = 15/30 D = 10/20 (consult factory) Frequency in MHz Load Capacitance Parallel Resonance in pF (³ 1 0 pF) SR = Series Resonance Temperature Range Blank: 0 to +70°C E: - 40 to +85°C H: - 20 to +70°C Fundamental AT Cut 3.570 4.000 6.000 9.000 13.000 – – – – – 3.999 5.999 8.999 12.999 27.000 200 150 100 60 40 80 3rd Overtone AT Cut 27.001 – 120.000 Consult factory for lower ESR Consult factory for available frequencies and specs. Not all options available for all frequencies. A special part number may be assigned. Mechanical: inches (mm) not to scale Packaging 24mm tape 16mm pitch Solder Pads Due to part size and factory abilities, part marking may vary from lot to lot and may contain our part number or an internal code. .09 (2.4) PLE .457 (11.6 ± .2) .200 (5.08) .106 (2.7) .09 (2.3) PLE .04 (1.1) .217 (5.5 ± .5) .09 (2.2) MAX Sep 2003 Pl tronics, Inc. (425) 776 -1880, Fax: (425) 776-2760, ple -sales@pletronics.com, www.pletronics.com 35