VLB7029036EG000050

VLB7 Series 3.3 V LVDS VCXO Oscillators December 2007 • Pletronics’ VLB7 Series is a voltage - quartz crystal controlled precision square wave generator with a LVDS output. • Tape and Reel or cut tape packaging. • • • • • 10.9 MHz to 670 MHz Enable/Disable Function on pad 2 Output frequency is synthesized. Low Jitter RoHS 6/6 Compliant Pletronics Inc. certifies this device is in accordance with the RoHS 6/6 (2002/95/EC) and WEEE (2002/96/EC) directives. Pletronics Inc. guarantees the device does not contain the following: Cadmium, Hexavalent Chromium, Lead, Mercury, PBB’s, PBDE’s Weight of the Device: 2.18 grams or .82 grams or 1.51 grams Moisture Sensitivity Level: 1 As defined in J-STD-020C Second Level Interconnect code: e4 Absolute Maximum Ratings: Parameter VCC Supply Voltage Vi Vo IO Input Voltage Output Voltage Output Current Unit -0.5V to +4.6V -0.5V to VCC + 0.5V -0.5V to VCC + 0.5V -50mA Thermal Characteristics The maximum die or junction temperature is 155oC The thermal resistance junction to board is 30 to 50oC/Watt depending on the solder pads, ground plane and construction of the PCB. Product information is current as of publication date. The product conforms to specifications per the terms of the Pletronics standard warranty. Production processsing does not necessarily include testing of all parameters. Copyright © 2007, Pletronics Inc. VPB7 Series 3.3 V LVDS VCXO Oscillators December 2007 Part Number: VLB7029036 EG 000 050 - 312.5M -XX Packaging code or blank T250 = 250 per Tape and Reel T500 = 500 per Tape and Reel T1K = 1000 per Tape and Reel Frequency in MHZ Pullability in ppm (Vcontrol) APR 050 = _ 50 ppm minimum is standard + Series Model Temperature Range EG = -10 to +70oC LK = -40 to +85oC Series Model Part Marking: PLE VLB7 FF.FFF M C YMDXX Marking Legend: PLE = Pletronics FF.FFF M = Frequency in MHZ YMD = Date of Manufacture (year-month-day) All other marking is internal factory codes Codes for Date Code YMD Code Year Code Month Code Day Code Day Code Day 1 1 D 13 T 25 7 2007 A JAN 2 2 E 14 U 26 8 2008 B FEB 3 3 F 15 V 27 9 2009 C MAR 4 4 G 16 W 28 D APR 0 2010 E MAY 5 5 H 17 X 29 1 2011 F JUN 6 6 J 18 Y 30 G JUL 7 7 K 19 Z 31 2 2012 H AUG 8 8 L 20 J SEP 9 9 M 21 K OCT A 10 N 22 L NOV B 11 P 23 M DEC C 12 R 24 www.pletronics.com 425-776-1880 2 VPB7 Series 3.3 V LVDS VCXO Oscillators December 2007 Electrical Specification for 3.30V _10% over the specified temperature range and the + frequency range of 10.9 MHZ to 670 MHZ Item Pullability, Absolute Pull Range Min -50 Max +50 Unit ppm Condition APR includes the effects of supply voltages, load changes, aging for 1 year, shock, vibration and temperature. Output Waveform Output High Level Output Low Level Differential Output (VOD) Output Offset Voltage (VOS) Differential Output Error (dVOS) Output Symmetry Output TRISE and TFALL Jitter -0.90 250 1.125 -47 150 Output Short Circuit Current Modulation Bandwidth Vcontrol Resistance (Pad 1) Voltage vs. Frequency Linearity Vcc Supply Current Enable/Disable Internal Pull-up V disable V enable Output leakage VOUT = VCC VOUT = 0V Enable Disable time Start up time Operating Temperature Range 10 20 -10 50 2.0 -20 -20 -10 -40 Storage Temperature Range -55 LVDS 1.60 -450 1.375 50 53 230 0.8 3.2 -20 +10 90 0.8 +20 +20 10 10 5 +70 +85 +125 mA KHz Kohm % mA Kohm Volts Volts uA uA nS nS mS o o o Volts Volts mVolts Volts mVolts % pS pS RMS Referenced to 50% of amplitude or crossing point Vth is 20% and 80% of waveform Measured from 12KHz to 20MHz from Fnominal Measured from 10Hz to 20MHz from Fnominal Vout = 0.0V Vcontrol = 1.65V +1.50 V , -3dB _ R1 = 50 ohms See load circuit Vcontrol = 1.65V _ 1.50 V + To Vcc (equivalent resistance) Referenced to Ground Referenced to Ground Pad 1 low, device disabled Time for output to reach a logic state Time for output to reach a high Z state Measured from the time Vcc = 3.0V Standard Temperature Range Extended Temperature Range “E” Option C C C Specifications with Pad 2 E/D open circuit or connected to VCC www.pletronics.com 425-776-1880 3 VPB7 Series 3.3 V LVDS VCXO Oscillators December 2007 Typical Phase-Noise Response 0 -20 -40 dBc/Hz -60 -80 -100 -120 -140 -160 10 1,000 100,000 10,000,000 100MHz dBc/Hz 400MHz dBc/Hz Frequency (Hz) Load Circuit Test Waveform Symmetry Vhigh 80% 50% 20% Vlow Trise Tfall Out Out* Showing Out Measurement only www.pletronics.com 425-776-1880 4 VPB7 Series 3.3 V LVDS VCXO Oscillators December 2007 Reliability: Environmental Compliance Parameter Mechanical Shock Vibration Solderability Thermal Shock Condition MIL-STD-883 Method 2002, Condition B MIL-STD-883 Method 2007, Condition A MIL-STD-883 Method 2003 MIL-STD-883 Method 1011, Condition A ESD Rating Model Human Body Model Charged Device Model Minimum Voltage 2000 1500 Conditions MIL-STD-883 Method 3115 JESD 22-C101 Package Labeling Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Courier New Bar code is 39-Full ASCII Label is 1" x 2.6" (25.4mm x 66.7mm) Font is Arial www.pletronics.com 425-776-1880 5 VPB7 Series 3.3 V LVDS VCXO Oscillators December 2007 Mechanical: Inches A B C 2 6 1 5 4 3 mm 9.65 +0.25 _ 13.97 +0.25 _ 4.50 +0.25 _ 0.66 1.27 0.72 R 4.57 2.54 1.27 0.38 0.380 +0.010 _ 0.550 +0.010 _ 0.177 +0.010 _ 0.026 typ. 0.050 0.028 R 0.180 0.100 0.050 0.015 1 D1 E1 F1 G1 FR4 PCB Base: Solder masked All via holes tented on bottom Copper Clad ½ oz. Typical Gold plated 0.02 µinch (0.5 µm) Label: Laser engraved on the 5x7 mm oscillator that is mounted on the FR4 base Pin 3 Ground plane is typical H1 I1 Not to scale J1 Typical Dimensions Pad 1 2 Function Vcontrol Output Enable/Disable Ground (GND) Output Output* Supply Voltage (VCC) Note Modulates the output frequency When this pad is not connected the oscillator shall operate. When this pad is